Accessories

• Fits Rode VideoMic GO II Microphone
• Pro-Grade Design
• Minimises Wind Noise and Plosives
• Open-Cell Foam and Synthetic Fur
• Wind Seal Blocks Unused Sockets

• Reduces Wind Noise.
• Reduces Plosives.
• Sized to Fit VideoMic NTG Mic.

• Measures 180mm Long
• Standard Hole Diameter 18 to 20mm

• For Microdot-Equipped Microphones.
• For Transmitters with Locking 3.5mm Jack.
• For Select Sennheiser Mic Transmitters.
• For Senal/Rode/Zoom/Nady Transmitters.
• For Azden & Tascam Transmitters.

• For the Rode NTG1 and NTG2
• Zip on Wind Muff
• Works with the Rode VideoMic

• Mount Lavalier Mic Under Clothing
• Reusable and Discrete
• Light Wind Protection
• Minimise Clothing Rustle
• 2.5cm Soft and Stretchy Disc

• For Lavalier Mics
• Mount Mics Silently under Clothing
• For On-Camera Interviews

• Mount Lavalier Mic Under Clothing
• Reusable and Discrete
• Light Wind Protection
• Minimise Clothing Rustle
• 2.5cm Soft and Stretchy Disc

• Wireless sound transmission for convenient use
• Portable
• Use with DJI Wireless Microphone Windscreen to eliminate noise generated by wind
• Long battery life of up to six hours
• Remote shutter control (requires DJI Pocket 2 Do-It-All Handle and DJI Pocket 2)

• Reduce Clothing Noise

19 to 25mm Mounting Clips Hytrel Construction Integrated 3/8" Threaded Stand Adapter

• Fits Mics from 0.75 to 0.87" in Diameter
• Both On and Off Boom-Pole Support
• Adjustable Sliding Suspensions
• Built-In XLR Connector Holder
• 1/4"-20 and 3/8"-16 Threads
• 2-Prong Hinge Mount

• For MKE400 shotgun microphone
• Replacement windscreen

• For CVM-V30 LITE Microphone.
• Made of High-Quality Artificial Fur.
• Reduces Noise When Recording Outdoors.
• Fits over Most Small Camera Microphones.

• Velcros onto each side of the strap.
• Soft against skin and only 1mm thick.

• For Comica VM10II and Rode Video Micro.
• Made of High-Quality Artificial Fur.
• Reduces Wind Noise When Recording.

• For Interviews, Posts, VLOGs, Podcasts
• Use with Android Devices and Computers
• 3.5mm Headphone Jack
• Digital Audio at up to 24-Bit/96 kHz
• Omni Pattern for Consistent Voice Sound

• Velcros onto each side of the strap.
• Soft against skin and only 1mm thick.

• Mount Lavalier Mics to MoCap Suits
• Repair Screens or Key Out Small Objects
• Reusable and Discrete
• Light Wind Protection
• Minimise Clothing Rustle

• Repair Blue Screens
• Attach Mics to MoCap Suits
• Key Out Small Objects
• Soft, Stretchy Moleskin and Hypoallergenic Adhesive Tape

• Minimises Wind Noise
• For VideoMicro Microphone
• For VideoMic Me/Me-C/Me-L Microphone
• Synthetic Fur
• Open-Cell Foam

• Fits on C-Stands and Mic Stands
• Holds Boom Pole In Fixed Position
• Hands Free Operation
• Coated To Protect Your Boompole
• Extra-Wide Yoke Permits Easy Positioning

• Replacement windscreen
• For select microphones

• Sticky Circles for Affixing Lav Mounts
• For RM11 Mounts and DPA Concealers
• For URSA MiniMounts
• Hypoallergenic
• For Use on Skin and Fabric
• Double Sided Peel-off Tabs

• Disguises Lav Mics on Clothing
• Reduces Cloth Noise
• Protects Against Light Breezes
• Reusable

• For MKE400 shotgun microphone
• Protection against wind noise

• For Sanken CS-M1 Microphone
• Works with Rode VideoMic NTG
• Fits 1.9 to 2.2cm Microphone Diameters
• Fur Cover Reduces Wind Noise
• Acoustically Transparent
• Protects Against Dust and Dirt

• Simple Cable Weight for Lavalier Microphones
• Makes Mic'ing up Talent Quick and Easy

• For Use with Sennheiser MKE1 Lav
• For Use with Countryman B6
• Durable Plastic Construction
• Blends in with Black Materials
• Leaves No Residue

• Neoprene Case
• Holds 34" (86.36cm) Closed Boompole with Mic
• Interior Accessories Pocket
• Protective Lining on Zipper Interior
• Adjustable Shoulder Strap

• Reduce Clothing Noise
• Super Plush Fur
• Wind Protection

• Repair Green Screens
• Attach Mics to MoCap Suits
• Key Out Small Objects
• Soft, Stretchy Moleskin and Hypoallergenic Adhesive Tape

• Mount Lavalier Mics to MoCap Suits
• Repair Screens or Key Out Small Objects
• Reusable and Discrete
• Light Wind Protection
• Minimise Clothing Rustle

• Repair Blue Screens
• Attach Mics to MoCap Suits
• Key Out Small Objects
• Soft, Stretchy Moleskin and Hypoallergenic Adhesive Tape

• For use with DPA 4460
• Durable Plastic Construction
• Blends in with Black Materials
• Leaves No Residue

• For use with DPA 4460
• Durable Plastic Construction
• Blends in with Black Materials
• Leaves No Residue

• Fits Vocal X Transmitter Built-in Mic
• Durable Clamp
• Reduce Noise & Ambience

• Mount Lavalier Mic Under Clothing
• Reusable and Discrete
• Light Wind Protection
• Minimise Clothing Rustle
• 2.5cm Soft and Stretchy Disc

• Large Soft Circles; low profile wind protection for boom mics
• Great to use for rigging mics in cars where foam gags can dip into shot
• Made from the same fabric as Ursa Soft Circles

• Fits Vocal X Transmitter Built-in Mic
• Durable Clamp
• Reduce Noise & Ambience

• For Saramonic DK3 Series Lavaliers from UwMic9S and Blink 800 Wireless Systems

• Reduce Clothing Noise
• Super Soft Fur
• Wind Protection

• 6 metal windscreens
• Provides extra protection
• For the Sony ECM-55

• 6 Overcover Fur Covers
• 30 Adhesive Stickies
• Reduces Lavalier Wind Noise
• Affixes to Skin or Clothing
• Black, Gray, and White

• For Lavalier Mics Under Clothing
• Minimise Clothing Rustle and Wind Noise
• Includes Stickies to Affix to Your Lav

• Reduce Clothing Noise
• Flat Sides Allow for Easy Attachment
• For Countryman B3 and Sennheiser ME 2
• For Sanken COS-11 and DPA 4060/4071
• Foam Material Can Be Cut

• Effectively Reduces Wind Noise
• Isolates Mic from Shock and Vibration
• Fits Mics from 20 to 22mm in Diameter
• For Shotgun Mics up to 32 cm Long
• Integrated Coiled XLR Cable

• Hides Lavalier Mic
• Reduces Clothing Rustle
• Soft Stretchy Moleskin
• Backed with Hypoallergenic Sticky Tape
• Apply to Skin or Clothing

• Lightweight Carbon Fibre Construction
• 3 x Telescoping Sections
• 1m to 2.5m Adjustable Length
• Internal Coiled Cable
• Bottom 3-Pin Male XLR Connection

• For Video and Electronic News Gathering
• Three Sections Smoothly Extend to 1.92 m
• Precision Balanced and Lightweight
• Anodised Aluminium Construction
• Intuitive Lock and Release System

• Attenuate breath and wind noise
• Prevents annoying pops and ticks
• Effective and rugged
• Available in black and grey

• 9x Long-Hair Fur Circles
• Disguises Lavalier Mics on Clothing
• Reduces Cloth Noise
• Protects Against Light Breezes
• Reusable

• For Wide Range of Smart Battery Gear
• 2054-Style Smart Battery
• Capacity: 6600mAh
• Rated Energy: 95Wh
• Nominal Voltage: 14.4V
• Onboard LED Battery Metre

• For SKM835 Transmitter
• Dynamic Cardioid Capsule
• Includes Grille
• Super- Cardioid pick-up pattern.

• 20dB of Wind Noise Attenuation

• Fits 19 to 38mm Mics
• Durable Shatterproof Plastic
• Removable Rubber Vanes for Custom Fit
• Printable 57 x 48 mm

• Super Lightweight
• 2.6m Long When Fully Extended
• Carbon Fiber Tubes
• Includes Rigid Travel Case

• Foam windscreen
• For large diaphragm studio microphones

• Set of 100 Sticky Pads
• Secure a Lav Mic
• Hypoallergenic

• Reduce Clothing Noise
• Flat Sides Allow for Easy Attachment
• For Countryman B3 and Sennheiser ME 2
• For Sanken COS-11 and DPA 4060/4071
• Foam Material Can Be Cut

• Great windshielding, in a smaller package
• Perfect for hand-held operations and interviews
• Optional Windjammer available for windiest conditions

• High-density EVA acoustic foam to absorb the off-axis voice from the front
• Ideal for home recording studio, live streaming, or professional vocal recording
• Works well with USB condenser microphones and large diaphragm microphones (BY-PM700/BY-M1000)
• Easy to use and space-saving
• Vented metal back plate to prevent the room reverberation and reflection from the back
• 3/8” screw and washer for attaching to booms or stands

• Compatible w/DSLRs & Compact Cameras
• Cuts Wind Noise on Built-in Microphones
• Also Fits Mobile Phones, iPads
• Set of 6

• Sticky Circles for Affixing Lav Mounts
• For Ursa Wire Rig
• 24mm Diameter

• 9x Long-Hair Fur Circles
• Disguises Lavalier Mics on Clothing
• Reduces Cloth Noise
• Protects Against Light Breezes
• Reusable

• For use with COS11, DPA 406X, DPA 4071
• Durable Plastic Construction
• Blends in with Black Materials
• Leaves No Residue

• Lightweight With Metal Build Quality
• Converts 48V to Plug-In Power For Passive Microphones
• Right Angle Connectors
• Adds Zero Noise To Your Audio Signal

• Foam windscreen is designed to avoid high-frequency roll-off
• Up to 20dB of wind noise attenuation
• UV and moisture resistant
• Excellent resistance to moisture and UV light

• Sticky Hypoallergenic Tape
• Small, Thin, and Low Profile
• Extremely Smooth Finish

• Effectively Minimise High Wind Noise
• Acoustically Transparent
• Works with Most Lavaliers

• For 4099U Universal Clip Microphone
• Fits Instruments of Many Sizes
• Hook-and-Loop Fastener
• Spare or Replacement

• For use with COS11, DPA 406X, DPA 4071
• Durable Plastic Construction
• Blends in with Black Materials
• Leaves No Residue

• Secures Rode Lavalier Microphones
• Pack of three
• Clip mounts

• Mount Lavalier Mic Under Clothing
• Reusable and Discrete
• Light Wind Protection
• Minimise Clothing Rustle
• 2.5cm Soft and Stretchy Disc

• For use with COS11, DPA 406X, DPA 4071
• Durable Plastic Construction
• Blends in with Black Materials
• Leaves No Residue

• For Sennheiser SK Transmitters
• 1.5 m Length
• Locking 3.5 mm Mini-Jack to XLR Female

• Blue colour
• Acoustically transparent foam
• For larger Shure "ball-type"
• For select microphones

• Customisable Furry Rectangle
• Protects Lav Mics Against Cloth Noise
• Protects Lav Mics Against Wind Noise
• Cut Your Own Shape to Fit Your Own Mic

• Furry Wind Cover for the VideoMic GO
• Minimises Wind Noise

• Slim, Low-Profile Mic Mount
• Fits Sennheiser ME 2 Microphone
• Made of Hardened Plastic
• Smooth, Hand Finished
• Allows Fabric to Glide Across Silently

• For TX-M2 Microphones & LB-1 Batteries.
• Recharges Two Devices Simultaneously.
• Locking Power Connector.
• Sleek, Compact Desktop Design.
• Stable Platform Prevents Slippage.

• Award-Winning Design
• Protects Against Vocal Plosives
• Large 6.2" Screen Diameter
• Arm Allows Precise & Secure Positioning
• Central Locking Mechanism for All Joints
• 1.5 to 3.5cm Clamping Range

• Suitable for Lavalier Mics
• Mount Mics Silently for Interviews
• Fix Small Personal Mics on Skin/Clothing

• Acoustically transparent foam
• Reduce breath and wind noise
• Good for outdoor applications
• Use with larger "ball-type" mics

• Hides Lavalier Mic
• Reduces Clothing Rustle
• Soft Stretchy Moleskin
• Backed with Hypoallergenic Sticky Tape
• Apply to Skin or Clothing

• Suitable for Chroma Keying

• For XS Lav USB-C and XS Lav Mobile
• Foam Windscreen
• Protects Against Plosives
• Spare Part for XS Lav Mic

• For Use with Sennheiser MKE2 Lav
• Durable Plastic Construction
• Blends in with Beige Materials
• Leaves No Residue

• Minimizes Wind Noise
• Acoustically Transparent

• Snap-fit
• Reduce wind noise
• For MX412 & MX418 Microphones

• Sticky Hypoallergenic Tape
• Small, Thin, and Low Profile
• Extremely Smooth Finish

• Fast and Secure Mounting
• Rear Cable Hook
• Minimises Microphone's Visual Appearance
• Mounts Mic Upwards or Downwards
• Left- or Right-Side Position

• Customisable Furry Rectangle
• Protects Lav Mics Against Cloth Noise
• Protects Lav Mics Against Wind Noise
• Cut Your Own Shape to Fit Your Own Mic

• Acoustically transparent foam
• For "ball-type" microphones
• Reduce unwanted noise
• Does not affect sound quality

• Reduces wind noise in outdoor scenes
• Cold shoe mount for mini LED light
• Built-in cushions protect hot shoe

• Secures & Conceals Lavalier Microphone
• Wire Clothing Clip
• Fabric Guard
• 6 x Pieces of Lav Concealer Tape
• Mounts on Skin or Clothing
• Soft, Pliable Mount

• Easy to rig beside buttons on shirts
• Perfect for rigging on the skin
• Moulded from hardened plastic

• For Microdot-Equipped Microphones.
• For Transmitters with TA4F Jack.
• For Select Shure/Axient Mic Transmitters.
• Convenient In-Line Design.
• Lightweight & Compact.

• For VideoMic Pro+
• Deluxe furry wind cover
• Designed to reduce wind noise
• Rubber base
• Open-cell foam with artificial fur

• Reduce Clothing Noise
• Reusable Soft Covers
• Wind Protection

• Attenuates 20dB of Wind Noise
• Protects Microphones w/ 40mm D x 55mm L

• Foam windscreen is designed to avoid high-frequency roll-off
• Up to 20dB of wind noise attenuation
• UV and moisture resistant

• For AT815 Microphone
• Shotgun windscreen

• 9x Long-Hair Fur Circles
• Disguises Lavalier Mics on Clothing
• Reduces Cloth Noise
• Protects Against Light Breezes
• Reusable

• Lightweight, Portable Reflection Filter.
• Compact Microphone Isolation Solution.
• Absorbs Unwanted Noise & Reflections.
• Aluminium Framing.
• Steel Filter Mount.

• Vertical and Horizontal Filtering
• Corrugated Surface Diffuses Sound
• 100 mm Radius for Sound Isolation
• Portable and Lightweight

• For VideoMicro & VideoMic GO Microphones
• Gold-Plated Contacts
• 6 m Length
• Fully Shielded

• Secures Cable on Rode Boompoles
• Pack of five
• Less handling noise
• Easier control

• Measures 99.1 to 381 cm
• Five Locking Sections
• Side 3-Pin XLR Connection
• Lightweight Graphite Design
• Captive-Collet Coupling System

• Easy to use
• High-performance windshield
• Reduces wind noise
• Rubber base
• Acoustically transparent artificial fur

• Spool of Cable 1000' in Length
• Standard Diameter, 21 AWG
• Fits All XLR-Type Audio Connectors
• Rejects EMI and RFI Interference
• Cross Linked POE Insulation

• Dedicated cold shoe adapter for Sony ZV-E10 and ZV-1
• Integrated cold shoe support
• Effective noise reduction during outdoor shooting
• Compatible with the camera original windshield

• Measures 1.12 to 4.87m
• Six Locking Sections
• Lightweight Graphite Material
• Offers Increased Interchangeability
• Removable Headpiece
• Removable Bottom Bumper

• Avalon Series
• Measures 0.54 - 2.04 m
• 6 Locking Sections
• Internal Coiled Cable
• Right Angled XLR Connection

• Suitable for Lavalier Microphones
• Double-Sided Adhesive Pads
• Mounts Directly on Skin or Clothing
• Affixes Microphone Securely
• Hypoallergenic Fabric Material

• Minimises Wind Noise
• For VideoMicro Microphone
• For VideoMic Me/Me-C/Me-L Microphone
• Synthetic Fur
• Open-Cell Foam

• Telescopic Boompole
• Rubber Collar Grips
• High-Quality 3-Pin XLR Cable
• Suitable for Boompoles
• Faux Fur Fuzzy Windscreen
• Provides Optimal Wind Noise Reduction

• Measures 1.1 to 5m
• Six Locking Sections
• Lightweight Graphite Material
• Offers Increased Interchangeability
• Removable Headpiece
• Includes KPCK16 Coiled Cable Kit

• For SGH-6/SSH-6 HWS6

• Measures 0.8m to 2.8m
• Six Locking Sections
• Lightweight Graphite Material
• Offers Increased Interchangeability
• Removable Headpiece
• Includes KPCK9 Coiled Cable Kit

• Quickly Identify Multiple Microphones
• For up to 4 Rode Microphones
• Fits Wireless GO and Wireless GO II
• Fits Lavalier II
• 4 x Colour-Coded Windshields
• 4 x Colour-Coded 3.5mm Jack Rings

• Spool of Cable 656' in Length
• Standard Diameter, 21 AWG
• Fits All XLR-Type Audio Connectors
• Rejects EMI and RFI Interference
• Cross Linked POE Insulation

• Measures 66 to 267 cm
• 5 Locking Sections
• Lightweight Graphite Design
• Captive-Collet Coupling System

• Cuts Wind-Noise Pickup by Internal Mics
• Works in Both XY and AB Position
• Fits Most DR Models
• Made of artificial fur