Beyerdynamic TG D71c Condenser Boundary Microphone
Product #50839
SKU TGD71C
Usually ships in 7 - 10 working days


Beyerdynamic TG D71c Condenser Boundary Microphone

Product #50839 | SKU TGD71C
Usually ships in 7 - 10 working days

Product Features
  • Extremely rugged housing in a compact, slim design
  • Flexible use with low-frequency instruments
  • High impulse fidelity and low attack time
  • Undistorted transmission of even high volumes
  • Integrated pre-amp
  • Phantom power 11 - 52 V
Our Price $349.00


Need more information about this product? - We'll get back to you ASAP
You must enter a valid email address.
Email me when stock arrives

The TG D71c boundary microphone is primarily used for miking bass drums while placing it simply without any additional mounting material into the bass drum. The non-slip rubber bottom makes sure that the microphone cannot shift by itself. In addition to this the TG D71c can also be used for other low frequency instruments such as cajon, grand piano or upright piano whereas the compact design and the half-cardioid polar pattern ensure easy positioning of the microphone. Due to its high impulse fidelity, a low attack time and a maximum sound pressure level of 148 dB, the TG D71c is suitable for miking percussion instruments.

The rugged housing in a slim, compact design protects the microphone against damages in the rough daily use on stage. For a permanent installation on a surface there are two mounting holes at the bottom of the microphone. The microphone is provided with an integrated pre-amp and can be powered on microphone inputs supplying 11 to 52 V phantom power. A red illuminating status LED displays the applied phantom power and in this way the operating status of the microphone.

Transducer type Condenser (back electret)
Operating principle Pressure gradient
Polar pattern Half-cardioid
Frequency response 25 - 20,000 Hz
Open circuit voltage 1.5 mV/Pa
Nominal impedance < 200 Ω
Load impedance ≥ 1 kΩ
Max. SPL at 1 kHz 148 dB [SPL@1% THD]
Signal-to-noise ratio 63 dBA, RMS
50 dBCCIR, Q-Peak
Noise voltage 1.1 µV [A, RMS],
4.9 µV [CCIR, Q-Peak]
A-weighted equivalent SPL 31.2 dB
Polarity Positive pressure produces positive voltage on pin 2 inrelation to pin 3
Wiring bal. with 3-pin XLR male
Connection 3-pin XLR connector
Power supply Phantom power
P48 (+48 VDC ±4 VDC, 6.8 kΩ ±20%, current consumption: < 3.2 mA
P24 (+24 VDC ±4 VDC, 1.2 kΩ ±20%, current consumption: < 3.2 mA
P12 (+12 VDC ±4 VDC, 680 Ω ±20%, current consumption: < 3.2 mA
Power consumption < 3.2 mA
Dimensions without connector
(L x W x H) 90 x 86 x 27 mm
Weight 413 g

Reviews

Own or use this product?
Give it a rating

Reviews

Own or use this product?
Give it a rating
Product:
Beyerdynamic TG D71c Condenser Boundary Microphone
Manufacturer:
Beyerdynamic
Model:
TGD71C
SKU:
TGD71C
RM Product #:
50839
Polar Pattern:
Half-Cardioid