Beyerdynamic TG V96c True Condenser Vocal MicrophoneProduct #50837 | SKU TGV96C
- High-quality vocal microphone
- Frequency-independent cardioid polar pattern
- Compensated proximity effectt
- Wire mesh basket without foam
- Shock mounted microphone transducer and electronics
Every comparison needs a reference – data, specifications, properties that can be measured against. For the vocal microphones of the Touring Gear series, the TG V96 true condenser microphone – the benchmark for live vocals assumes this role.
The strength of the TG V96 lies in its absolutely faithful reproduction - even of the finest nuances and on stage every detail counts. The microphone’s exterior stands out for its sophisticated design, with a special coated surface that is pleasant to the touch. But it is what’s inside that makes the TG V96 into a topclass microphone and makes it stand out with vocalists, professional rental companies and sound technicians: this real condenser microphone shines with a captivatingly natural sound. The subtle treble boost provides an open, finely detailed and nobtrusive sound pattern.
Further advantages: the TG V96 can be operated with phantom powering down to 11V without affecting the performance. The 5-layer pop protection made from metal gauze of differing mesh sizes and a sintered plate optimally suppresses plosives while significantly improving the rear-attenuation.
The TG V96 is rugged enough for the stage and is supplied with an individual frequency response curve print out. Handcrafted in Germany.
Sound Channeling Technology
- Linear frequency response due to specially shaped back plate electrodes to optimise the diaphragm vibrations
- Optimal sound due to multi-layer metal gauze on the upper grill
- Protects the diaphragm with sintered, acoustically neutral bronze
|Operating principle||Pressure gradient|
|Close miking||20 - 20,000 Hz|
|Distant miking (measured at 1 m)||55 - 20,000 Hz|
|Open circuit voltage||4 mV/Pa (-48 dBV) ±2 dB|
|Nominal impedance||60 Ω|
|Load impedance||≥ 1 kΩ|
|Max. SPL at 1 kHz||150 dB|
|Signal-to-noise ratio||64 dB [CCIR, Q-Peak]|
|Equivalent SPL||20 dB [A, RMS]|
|In-phase rejection 50 - 20,000 Hz||≥ 60 dB|
|Power supply||Phantom power: 24 - 48 V
(recommended: 48 V)
|Current consumption||4.3 mA|
|Connection||3-pin male XLR,
1 = ground
2 = +
3 = -
|Shaft diameter||26 mm|
|Head diameter||48 mm|