DPA Microphones d:vote 4099S Clip Microphone for Saxophone
Product #20816
SKU VO4099S
Usually ships in 2 - 3 weeks


DPA Microphones d:vote 4099S Clip Microphone for Saxophone

Product #20816 | SKU VO4099S
Usually ships in 2 - 3 weeks

Designed to clip onto saxophone for live sound and recording purposes.


Need more information about this product? - We'll get back to you ASAP
You must enter a valid email address.
Email me when stock arrives

The d:vote 4099S Clip Microphone for Saxophone from DPA Microphones is designed to clip onto your saxophone for live sound and recording purposes. Its mount can be adjusted by one hand and is optimized to attach itself gently to your instrument in order to prevent damage and marks. It can be used with soprano, alto, or baritone saxes.

The 4099S has a pre-polarized condenser capsule with a supercardioid polar pattern. Its gooseneck allows for a variety of positioning possibilities. The 4099S terminates in a MicroDot connector, providing compatibility with DPA's connection adapters for use with a variety of third-party wireless systems. An XLR adapter is included with a belt clip for use in a wired system with 48-volt phantom power.

Specifications

Transducer Type
Pre-Polarized Condenser
Polar Pattern
Supercardioid
Principle of Operation
Pressure Gradient
Frequency Range
20 Hz to 20 kHz
+/- 2 dB, 20 cm Distance: 80 Hz to 15 kHz with 2 dB Soft Boost @ 10 to 12 kHz, Second Order Low-Cut Filter @ 80 Hz
Sensitivity
6 mV/Pa; -44.5 dB Reference: 1 V/Pa (Nominal, +/- 3 dB)
Equivalent Noise Level
Typ. 23 dB(A) Reference: 20 µPa (Maximum 26 dB(A)) (A-Weighted)
Signal to Noise Ratio
71 dB (Reference: 1 kHz @ 1 Pa, 94 dB SPL)
Total Harmonic Distortion (THD)
< 1 % up to 123 dB SPL peak
< 1 % up to 120 dB SPL RMS sine
Dynamic Range
100 dB
Maximum SPL
142 dB (Peak Before Clipping)
Output Impedance
MicroDot: 30 to 40 Ω,
XLR: 100 Ω
Cable Drive Capability
XLR: 984' (300 m)
Output Balance Principle
Signal balanced with XLR adapter
CMRR
XLR Adapter: > 60 dB @ 50 Hz to 15 kHz
Power Supply
Minimum 5 V to Maximum 50 V through DPA adapter for wireless systems
48 V phantom power ±4 V with XLR adapter
Current Consumption
MicroDot: 1.5 mA
XLR Adapter: 3.5 mA
Connector
MicroDot
XLR Adapter Included
Polarity
Positively increasing sound pressure produces positive going voltage at MicroDot pin (and pin 2 on DAD6001 XLR adapter)
Operating Temperature
-40° to 113°F (-40° to 45°C)
Relative Humidity
Up to 90%
Cable Length
6' (1.8 m)
Gooseneck
Length: 5.5" (140 mm)
Capsule Diameter
0.2" (5.4 mm)
Microphone Length
1.8" (45 mm)
Weight
1.1 oz (31 g)

Reviews

Own or use this product?
Give it a rating

Reviews

Own or use this product?
Give it a rating
Product:
DPA Microphones d:vote 4099S Clip Microphone for Saxophone
Manufacturer:
DPA Microphones
Model:
VO4099S
SKU:
VO4099S
RM Product #:
20816