DPA Microphones 3506A Stereo Kit with 4006A Omnidirectional Microphones
Product #20638
SKU 3506A
Usually ships in 2 - 3 weeks


DPA Microphones 3506A Stereo Kit with 4006A Omnidirectional Microphones

Product #20638 | SKU 3506A
Usually ships in 2 - 3 weeks

A kit for the crucial capturing of instruments or vocals.
Our Price $9,149.00


Need more information about this product? - We'll get back to you ASAP
You must enter a valid email address.
Email me when stock arrives

The 3506A Stereo Kit with 4006A Omnidirectional Microphones by DPA Microphones is a kit for the crucial capturing of instruments or vocals in recording and live sound reinforcement applications. The 3506A kit includes two frequency matched 4006A omnidirectional microphones; two APE30RS acoustic pressure equalizers, 30mm ball; two APE40RS acoustic pressure equalizers, 40mm ball; two APE50RS acoustic pressure equalizers, 50mm ball; two DD0251 free-field grids, silver; two DD0254 close-miking grids, trapezoid silver; two DD0297 diffuse-field grids; two UA0777 nose cones; two US0896 foam windscreens; two UA0961 microphone clips; and one UA0837 stereo boom excluding holders.

The specially selected 4006As are matched within ± 0.5 dB on frequency range, sensitivity and self noise. The high sensitivity, low noise-floor and extremely linear frequency response of the microphone pair makes the 3506A kit a great choice for all professional A-B stereo recordings.

Key Features

  • The kit includes a frequency and sensitivity matched pair of 4006A omnidirectional microphones
  • Exceptional linearity, particularly at the high-end
  • Clean, neutral sonic character
  • Omnidirectional polar pattern
  • Ideal for A-B stereo pairs for symphonic concert hall recordings

Specifications

Directional Characteristic
Omnidirectional
Principle of Operation
Pressure
Transducer
Pre-polarized Condenser
Frequency Range
10 Hz to 20 kHz
± 2 dB: 10 Hz to 20 kHz
Sensitivity
Nominal ± 2 dB at 250 Hz: 40 mV/Pa; -28 dB re. 1 V/Pa
Equivalent Noise Level
A-weighted: Typ. 15 dB (A) re. 20 µPa (max. 17 dB (A))
ITU-R BS.468-4: Typ. 27 dB (max. 29 dB)
Signal-to-Noise Ratio
(A-weighted), re. 1 kHz at 1 Pa (94 dB SPL): Typ. 79 dB(A)
Total Harmonic Distortion (THD)
< 1 % up to 139 dB SPL peak
Minimum Load Impedance
2 kΩ
Dynamic Range
Typ. 124dB
Max Input Sound Level (SPL)
147dB
Switchable Attenuator
0 dB / -20 dB
Output Impedance
< 200 Ω
Cable Drive Capability
328' (100 m)
Output Balance Principle
Impedance balancing with active drive
Common Mode Rejection Ratio
> 60 dB
Power Supply
For Full Specifications: 48 V Phantom power (+/- 4V)
Current Consumption
2.8 mA
Connector
XLR-3M: Pin 1 shield, pin 2 signal + phase, pin 3 - phase
Output Voltage
RMS: > 5 V
Polarity
+V at Pin 2 for positive sound pressure
Temperature Range
-40 ° to 122 °F (-40 ° to 50 °C)
Relative Humidity
Up to 90%
Classification
Conforms to IEC 61672 class I (with near-field grid DD0251)
Matching Tolerance
± 0.5 dB
Phase Deviation For Kit
< 5°
Dimensions (Diam. x L)
Mic: 0.63 x 6.7" (16 x 170mm)
Mic Capsule Diameter: 0.63" (16 mm)
Weight
5.7 oz (163 g)

Reviews

Own or use this product?
Give it a rating

Reviews

Own or use this product?
Give it a rating
Product:
DPA Microphones 3506A Stereo Kit with 4006A Omnidirectional Microphones
Manufacturer:
DPA Microphones
Model:
3506A
SKU:
3506A
RM Product #:
20638