(no ratings yet) Thanks for your rating!
DPA Microphones d:vote 4099 Rock Touring Kit, 4 Microphones and Accessories for Hi SPLProduct #20819 | SKU VO4-ROCK |(no ratings yet) Thanks for your rating!
The d:vote 4099 Rock Touring Kit, 4 Microphones and Accessories for Hi SPL is a complete solution for capturing instruments or vocals in recording and live sound reinforcement applications. It is ready for on-the-road-use such as for musicians, theater shows, touring companies, and more. It offers a wide selection of microphones and accessories selected for typical use.
The rock touring kit includes four 4099 supercardioid instrument microphones with microdot connectors, four DAD6001BC MicroDot to 3-pin XLR (P48) with belt clip adapters, four miniature microphone cables, four clips for drum, four clips for sax/trumpet, two universal clips, and a Peli case for transport.
The d:vote 4099 kit has a detachable heavy duty cable from the gooseneck to the XLR adapter and makes it very convenient to mount the microphone on an instrument before connecting it. The low profile and unobtrusive design provides uncompromised sound quality and accurate dynamics for the majority of instruments. Standard gooseneck length is 5.5" (140mm) and can be altered with the optional gooseneck extension (sold separately) to add another 50% to the length.
- The flexible clip-on system provides fast, stable, and repeatable positioning. The mics can be easily positioned at different angles via the flexible gooseneck to match different radiation patterns and allow a variety of sound nuances
- Ready for on-the-road-use for rental companies, musicians, or theatres
- The close microphone placement to sound levels like violins or guitars requires microphones with normal sensitivity in order not to clip the following input stages
- The kit includes magnet mounts, universal mounts, and offers a variety of mounting solutions
|Principle of Operation
||20 Hz to 20 kHz
80 Hz to 15 kHz with 2 dB Soft Boost @ 10 to 12 kHz, Second Order Low-Cut Filter @ 80 Hz (>+/- 2 dB, 20 cm Distance)
||6 mV/Pa; -44.5 dB Reference: 1 V/Pa (Nominal, +/- 3 dB)
|Equivalent Noise Level
||Typ. 23 dB(A) Reference: 20 µPa (Maximum 26 dB(A)) (A-Weighted)
|Signal to Noise Ratio
||71 dB (Reference: 1 kHz @ 1 Pa, 94 dB SPL)
|Total Harmonic Distortion (THD)
||< 1 % up to 123 dB SPL peak
< 1 % up to 120 dB SPL RMS sine
||142 dB (Peak Before Clipping)
||MicroDot: 30 to 40 Ω
XLR: 100 Ω
|Cable Drive Capability
||XLR: 984' (300 m)
|Output Balance Principle
||Signal balanced with XLR adapter
||XLR Adapter: > 60 dB @ 50 Hz to 15 kHz
||Minimum 5 V to Maximum 50 V through DPA adapter for wireless systems
48 V phantom power ±4 V with XLR adapter
||MicroDot: 1.5 mA
XLR Adapter: 3.5 mA
||Fits Instruments with a Body Depth Between 1.4 and 2.1" (35 and 55 mm)
||Positively increasing sound pressure produces positive going voltage at MicroDot pin (and pin 2 on DAD4099-BC XLR adapter)
||-40 to 113°F (-40 to 45°C)
||Up to 90%
||Length: 5.5" (140 mm)
||1.8" (45 mm)
||1.16 oz (33 g)