Guitar & Bass

• Guitar and Bass Amp & Effects Modelling
• Combinable Effects, Amps & Microphones
• 1/4" Input for Guitar and Bass
• Dedicated 1/4" Output for External Amp
• Dedicated 1/8" Headphone Output

• Open-Gear Tuning Heads Made by Grover
• Semi-Hollow Structure
• New Pickups With a Retro Sound and Look
• Improved Playability

• For Acoustic Electric Guitar, Bass Guitar, Electric Guitar
• Silent Practice
• Recording Interface
• Supports TRRS Headset or Earpods with Mic
• MightyAmp™ APP
• Bluetooth

• Passive re-amping device
• Allows for playing prerecorded tracks through amplifiers and pedals and re-record the results
• Level control for fine tuning the gain
• Ground lift switch, when activated helps to reduce hum and buzz caused by ground loops

• 30 watts portable wireless Modeling Amplifier
• TSAC-HD (White-Box) Amp Modeling algorithm
• 512 samples IR resolution
• 7 presets with ACTIVE functions
• White-box algorithm EFX
• Stereo DLY / RVB effects with gorgeous tone

• Made from highly durable materials
• REAN® connectors by Neutrik AG
• 3m guitar cable
• Straight to straight

• For 6-String Electric Guitars
• Tin-Plated Steel Hex Core Wire
• Nickel-Plated Steel Wrap Wire
• Brass Ball Ends
• Made in USA

• 40W at 5 Ohms
• 1x10" Cabinet
• Tube Preamp & Solid State Power Amp
• Up to 20 Amp/Cabinet Emulations
• 3-Band AEQ with Bass, Mid & Treble

• 50W RMS
• Nutube Power for Rich, Warm Tone
• 8" Coaxial Speaker with Tweeter
• Compression and Drive Circuits
• 4-Band AEQ with 2 Midrange Knobs

• For 6-String Electric Guitars
• Tin-Plated Steel Hex Core Wire
• Nickel-Plated Steel Wrap Wire
• Brass Ball Ends
• Made in USA

• Made from highly durable materials
• REAN® connectors by Neutrik AG
• 3m guitar cable
• Straight to right angle connector

• Alder body with Flamed Maple Top
• Voiced Tone VTS-63 & VTH-77 Pickup Sets
• Cort® CFA-III Tremolo
• Hard Maple Neck with Rosewood Fingerboard
• Cort® Staggered Locking Tuners
• Ergo-V Neck Profile

• Automatic setup, friendly matching
• High quality audio 2.4 GHz broadcast
• Long distance, low latency
• Stable mode for anti-interference
• Long battery lifetime
• Built-in booster & tuner

• Compatible with iOS, Mac, and PC
• 24-Bit / 96 kHz Recording
• High-Quality Low-Noise Preamp
• Amp Out with Selectable FX/Thru Modes
• Integrated Tuner
• Loopback+ for Streaming Between Apps

• Vintage Machineheads
• Genuine Bone Nut & Saddle
• Mahogany Back & Sides
• Solid Sitka Spruce Top

• Tone Modelling, Amp Recording & Re-Amping
• Font-Panel 1/4" Line Input and Amp Input
• XLR Line Out, 1/4" Cab Out, 1/4" Amp Out
• Preamp or Powered Signal Switch
• Dual Gain Stage Level Attenuation
• Ground Lift and Galvanic Isolation

For 6-String Electric Guitars, Nickel-Plated Steel Wrap Wire, High-Carbon Steel Hex Core, Distinctive Bright Tone, Excellent Intonation, One Set

• Made from highly durable materials
• REAN® connectors by Neutrik AG
• 5m guitar cable
• Male to female XLR

• Ergonomic features
• Accurate single-handed key changes
• Dual-radius design
• Conforms to flat or curved fretboards
• Buzz-free operation on 6 or 7 strings

• For 6-String Acoustic Guitars
• Hex-Shaped Tin-Plated Steel Wire
• Phosphor-Bronze Wire Wrapping
• Hermetically Sealed Package
• 1 Set

• Highly durable
• XLR to TRS
• 1.5 metres
• Connector by Neutrik

• Made from highly durable materials
• REAN® connectors by Neutrik AG
• 0.5m guitar cable
• Male to female XLR

• For 6-String Electric Guitars
• Proprietary Iron-Cobalt Alloy Wrap Wire
• Tin-Plated Steel Hex Core Wire
• Brass Ball Ends
• Made in USA

• Between Super Slinky and Extra Slinky
• Fast, light tension

• Made from highly durable materials
• REAN® connectors by Neutrik AG
• 3m Microphone Cable
• Male to Female XLR

• Straightforward rock-solid construction
• Soft rubber backrest and TPU padding
• Folds up flat for transport and storage
• Two angles of splay

• Made from highly durable materials
• REAN® connectors by Neutrik AG
• 15m guitar cable
• Male to female XLR

• Trigger Release Latching System
• TSA Recognised & Accepted Locking Latch
• Cushioned Rubber Over-Molded Handle
• Heavy Duty Construction
• Aluminium Valance

• Faithful Reissue of the Original 1990's Sovtek MIG-50

• Bumper protected valance
• Injection molded feet
• Indestructible cushioned rubber handle
• Full length neck support
• Rigid EPS foam interior
• Accessories compartment

• 8W 6.5” FRFR speaker
• TSAC-HD Amp Modeling algorithm
• Patch Level function for each preset
• 512 samples IR resolution
• White-box algorithm EFX
• 7 presets with ACTIVE functions

• 50 Watt
• 2 Channels
• 3 Band EQ (Bass - Middle - Treble)
• 6.5" Woofer and 1" Tweeter
• 1/8 Aux input
• 1/4 Aux output (back)

• 60W rich warm sound
• 2 independent channels
• Acoustic Impulse Response
• Drum & Loop (60s phrase loop)
• Bluetooth Audio Stream
• Free APP controller

• Highly durable
• RCA to TRS
• 3 metres
• Connector by Neutrik

• Adjustable padded rear straps
• Comfortable foam mesh handle
• Soft inner velvet lining
• Large front pockets
• 35mm DHFOAM® padding

• Roto-Molded for Durability
• ATA Compliant
• Ergonomic Handle
• Wheels for Easy Transport
• TSA Locking Strap
• Unrivalled Protection when Traveling

• American Basswood Body with 6mm (1/4”) Maple Top
• Seymour Duncan® SH2N & TB4 Humbucker
• Custom Wired Electronics
• Roasted Maple Neck & Fingerboard
• Luminlay Side Dots
• Cort® Staggered Locking Tuners

• Accessory Compartment
• Full Neck Support
• Quiet-Glide Wheels
• Stainless-Steel Moulded-in Hinges
• Corrosion & Impact Resistance
• Gasket-Sealed

• Accessory Compartment
• Full Neck Support
• Quiet-Glide Wheels
• Stainless-Steel Moulded-in Hinges
• Corrosion & Impact Resistance
• Accessory compartments

• Rugged ABS Exterior Shell
• Full Length Neck Support
• Bumper Protected Valance
• Cushioned Rubber Over-Molded Handle
• Rigid EPS Foam Interiors with Plush Covering
• Accessories Compartment

• Watertight Gasket Seal
• Stainless Steel Moulded-in Hinges
• Quiet-Glide Wheels
• Accessory Compartment
• Full Neck Support

• Accessory Compartment
• Full Neck Support
• Quiet-Glide Wheels
• Stainless-Steel Moulded-in Hinges
• Corrosion & Impact Resistance

• Highly durable
• TR to TRS
• 3 metres
• Connector by Neutrik

• Made from highly durable materials
• REAN® connectors by Neutrik AG
• 1m guitar cable
• Male to female XLR

• Highly durable
• XLR to TRS
• 3 metres
• Connector by Neutrik

• 3W desktop Modeling Amplifier
• TSAC-HD Amp Modeling algorithm
• 512 samples IR resolution
• 7 presets with ACTIVE functions
• Drum machine
• Patch Level function for each preset

• Highly durable
• RCA to TRS
• 1.5 metres
• Connector by Neutrik

• Made of specially tempered tin plated high carbon steel used on electric and acoustic guitars

• Cable length 10ft (3.05m)
• High-Quality Design

• Universal Wall Mount Guitar Hanger
• Automatically Locks and Releases the Guitar Neck
• Specially Formulated Rubber Coating
• Interchangeable Colour Coding Ring

• A-Frame Guitar Stand for Acoustic and Classical Guitars
• Straightforward, rock solid construction
• Soft rubber backrest and TPU padding
• Two angles of splay
• Folds up flat for transport and storage

• For 4-String Basses
• Proprietary Iron-Cobalt Alloy Wrap Wire
• Tin-Plated Steel Hex Core Wire
• Brass Ball Ends
• Made in USA

• 200W into 4 Ohms.
• Class-D Amplification.
• Portable at 2 lb.
• MOSFET Preamp for Tube-Like Tone.
• Gain and Master Controls.

• 200W Cabinet for Electric Bass.
• Suitable for Small Venues & Rehearsals.
• 2 x 8" Custom Drivers.
• Vertical Orientation.
• Punchy Low End.

• Battery-Powered Combo Amp
• Up to 15W Through 1 x 4" Speaker
• Clean, Drive & Lead Channels
• Access Tones from AmpliTube Software
• 10 Amps / 26 Stompboxes by AmpliTube CS

• Highly durable
• TR to TRS
• 31.5 metres
• Connector by Neutrik

• EPS foam interior.
• Full length neck support.
• Bumper protected valance.

• Fiberglass reinforced nylon trigger release latching system
• TSA recognized and accepted locks
• Bumper protected valance
• Injection Molded Feet
• Indestructible cushioned rubber over-molded handle

• Molded-in Bumper Protection
• Molded-in Feet
• Fully Plush Lined EPS Molded Interior
• Oversized Compartment Accommodates Accessories

• Distinctively Shaped Hardcase Protection
• Fibreglass Reinforced Nylon Trigger Release Latching System
• TSA Recognised & Accepted Lock
• Bumper Protected Valance
• Plush Foam Interior
• Accessory Compartment

• Trigger Release Latches
• TSA Recognized & Accepted Locks
• Comfortable Rubber Over-Molded Cushioned Handle
• Molded-in Bumpers
• Full Length Neck Support
• Rigid EPS Foam Interiors

• Distinctively Shaped Hardcase Protection
• Fibreglass Reinforced Nylon Trigger Release Latching System
• TSA Recognised & Accepted Lock
• Bumper Protected Valance
• Plush Foam Interior
• Accessory Compartment

• Made from highly durable materials
• REAN® connectors by Neutrik AG
• 6m guitar cable
• Straight to straight

• Made from highly durable materials
• REAN® connectors by Neutrik AG
• 6m guitar cable
• Straight to right angle connector

• Level - Sets the volume of the overdriven signal
• Drive - Sets the amount of saturation in the overdriven signal
• Blend - Mixes the clean input signal with the overdriven signal
• Tone - Controls the high frequency content of the sound
• MBoost - Gives a subtle 6 dB boost from 300 Hz to 1 kHz to help you cut through the mix
• Grunt - Provides a low-end boost to massively thicken your sound when engaged

• 250 Watts @ 4Ω.
• Built-In Tuner for 4,5,6 String Basses.
• Works with Downloadable TonePrint FX.
• USB Port for Installing TonePrint FX.
• Speakon and Balanced XLR Outputs.

• Includes iSeries 2015-7 case and 1SKB-PB1712 pedalboard
• Accommodates up to eight pedals
• Under-mounted tray accommodates a variety of power supplies
• Molded-in handgrips for easy lifting

• Molded-in bumper protection
• Molded-in feet
• Fully plush lined EPS molded interior
• Oversized compartment accommodates accessories

• Reinforced Latches
• Molded in Bumpers
• Full Length Neck Support
• Plush Lined Rigid EPS Interiors

• Higher level of comfort
• Adjustable, patent-pending design
• Suited for those with ailments, aches or pain
• No need for modification or bulky hardware
• Use existing strap buttons

• Unique Fast-Matching System
• 5.8GHz Band
• Long Lasting Battery & Power Case
• For Active/Passive Electric Guitar & Bass
• For Acoustic-Electric Guitars with Piezo or Magnetic Pickup

• Made from highly durable materials
• REAN® connectors by Neutrik AG
• 10m microphone cable
• Male to female XLR

• Powersound Pickups
• Meranti Body
• 6-Screw Vintage Tremolo
• Ergonomic Body Contour
• Hardmaple Neck

• Neck-thru body construction
• Bartolini MK-1 Pickups
• Bartolini MK-1 EQ

• Grand Auditorium Cutaway Body
• Solid Sitka Spruce Top
• Pau Ferro Back & Sides (Arched Back)
• L.R.Baggs® EAS-VTC

• Small guitar amplifier mini stack with jaw-dropping British punch
• NuTube technology supplies true tube-amp performance
• Iconic chrome stand and distinctive Vox styling provide a classic appearance
• Matching open-back cabinet loaded with a custom 10" Celestion speaker

• 9 Variety of digital effects
• NUX Mighty APP
• 4 Channels, 8 presets with Gain and 3-band EQ

• Ash Top on Mahogany Body
• Bartolini® MK-1 Pickups
• MetalCraft M Bridge
• 5pcs Panga Panga & Walnut Neck

• Flamed Maple Top on Alder Body.
• Voiced Tone VTH-77 Pickup Set.
• Cort CFA-III Tremolo.
• 1 Volume & 1 Tone 5-way Switch.

• Mahogany Body with Zebrawood and Maple Top.
• Markbass MB-1 EQ.
• Bartolini MK-1 EQ.
• Canadian Hard Maple Neck.

• One 12" Celestion V-Type Speaker.
• For Use with Most Guitar Amplifier Heads.
• Ideal Extension for Combo Amps.
• 70W RMS / 8 Ohms Mono.
• Parallel 1/4" Speaker Inputs.