Speakers & Headphones

• Mixing, Video, Recording, Podcasting
• Over-Ear, Sound-Isolating Design
• Closed-Back Design
• 40mm Custom-Matched Dynamic Drivers
• 5 Hz to 35 kHz Frequency Response

• 130 mm Composite Sandwich Woofer Cone
• 25 mm Titanium Dome Tweeter
• 160 W Peak Analogue AB Amplifier
• Elliptical Modelled Dispersion Waveguide
• Wide Horizontal Dispersion

• For Studio Recording, Mixing, Mastering
• Acoustic Tuning Adjustment Controls
• 1" Silk Dome Tweeter for Treble
• 4.5" Kevlar Woofer Cone for Bass
• 25W Class AB Amplification

• Compact Speakers for Content Creation.
• For Gaming, Monitoring, and More.
• Bluetooth 5.0 Streaming.
• 3.5" Woven Composite Woofer.
• 1" Silk-Dome Tweeter.

• 2x 3/4" Tweeters
• 2x 3" Woofers
• Bluetooth Capability
• 2x RCA Inputs
• 1x 3.5mm Input

• 120W Total Output
• 203 mm Cone Woofer
• 25 mm Dome Tweeter
• Room Control Response Switch
• High Trim

• Compact Speakers for Content Creation
• For Gaming, Monitoring, and More
• Bluetooth 5.0 Streaming
• 4.5" Woven Composite Woofer
• 1" Silk-Dome Tweeter

• Infinitely variable height adjustment
• Tilt angle up to +/- 15°
• 360° rotatable
• EVA padded bearing surface
• Anti-tip for the speaker

• New Look over SRH840
• 40mm Neodymium Dynamic Drivers
• Closed-Back Over-Ear Design
• Foldable Construction
• Replaceable Earpads

• 70W Total Output
• 127 mm Cone Woofer
• 25 mm Dome Tweeter
• Room Control Response Switch
• High Trim

• Weighted Base for Stability
• 781mm High
• 200x200mm Platform
• Foam Pads to Stop Scratching
• Max Load 10kgs
• Sold as a Pair

• 100m Range
• Individual User Name Assignment
• Stereo, Focus & Mono Modes
• Simultaneous Operation of up to 12 Systems

• Solid cast-iron base.
• Steel tray with isolating foam rests.
• Black powder coating.
• 50 kg load capacity.

• DSP engine included
• Higher SPL
• Better resolution
• Linear frequency and phase response
• Even deeper bass

• Composed of 2 black aluminum speaker stands (SPS023) and one transport bag.

• Patented Image Control Waveguide
• Next-generation JBL transducers
• Patented Slip StreamT low-frequency port
• Dual integrated, custom Class-D amplifiers
• New Boundary EQ settings

• Perfect for recording studios and listening environments
• Large 25 cm x 25 cm metal platform with soft rubberised padding reduces vibration
• Precise height adjustment in 5 steps from 3 ft 0.93m up to 1.15m of elevation
• Heavy-duty steel construction for maximum weight capacity of 45 kg
• Floor triangular base length of 45 cm per side

• 2-way bass-reflex bi-amplified nearfield studio monitor
• 5" cone woofer and 1" dome tweeter
• 54Hz - 30kHz frequency response
• 45W LF plus 25W HF bi-amp system for total 70W power amplification
• ROOM CONTROL and HIGH TRIM response controls
• XLR and TRS phone jack inputs, balanced or unbalanced

• VCA Control and USB Audio Interface.
• Large Control Knob Sets Levels Faster.
• High-End VCA Technology.
• Controls 3 Pairs of Studio Monitors.
• 2 x Powerful Headphone Amplifiers.

• New Look over SRH440
• 40mm Neodymium Dynamic Drivers
• Closed-Back Over-Ear Design
• Foldable Construction
• Replaceable Earpads

• Tempered Glass Base
• Floor Spikes for Stability
• Max weight 10Kgs
• 250x250mm Glass Top Plate
• 600mm Hight

• For Music Production and Video Editing
• 0.75" Dome Tweeter and 3.5" Cone Woofer
• 26W Output Power per Speaker
• 3-Way 500 Hz Room Control Switch
• 3-Way 2 kHz HF Trim Switch
• Wide Frequency Response

• 95W Total Output
• 165 mm Cone Woofer
• 25 mm Dome Tweeter
• Room Control Response Switch
• High Trim

• For Music Production and Video Editing
• 1" Dome Tweeter and 4.5" Cone Woofer
• 26W Output Power per Speaker
• 3-Way 500 Hz Room Control Switch
• 3-Way 2 kHz HF Trim Switch
• Wide Frequency Response

• For EON710, EON712, and EON715 Speakers

• Long-throw 6-3/4" Woofer.
• Built-in 75 & 35 Watt Power Amps.

• 45Hz – 20kHz Frequency Response
• 0° Phase Response
• 100W + 40W Class-D Amplifiers
• 8” Composite Fiberglass Woofer
• 1” ferrofluid cooled Soft Dome tweeter
• RCF Precision Waveguide

• Compact Speakers for Content Creation
• For Gaming, Monitoring, and More
• 3.5" Woven Composite Woofer
• 1" Silk-Dome Tweeter
• Low- and High-Frequency Adjustment
• Class A/B Amplifier

• Ideal for rental and event organisers
• Extremely robust steel construction
• Double-braced legs

• 5" Woofer
• 1" Soft Dome Tweeter
• Bi-Amped Class-D Amplifier: 2 x 50W
• Frequency Response: 50 Hz to 21 kHz
• 24-Bit / 96 kHz Signal Path and DSP
• Sensitivity: 3 Settings

• Improve the sound of your existing amps and speakers.
• Ideal for heavy guitar and bass cabinets and PA speakers.
• Decouples your speakers from supporting surfaces.
• Helps to minimise vibrational resonance into coupled surfaces and mic stands.

• Reinforced steel telescoping pole
• Holds up to 68kg
• Twist lock and secure locking pin
• Compatible with 35mm pole cups
• 760-1160mm height adjustment

• 5.25"(13.3 cm) Woofer
• 0.75"(1.9 cm) Dome Tweeter
• 35 W/Channel Amplifier
• XLR, 1/4", and RCA Inputs
• Stereo Headphone Jack

• Compatible with the Q150 Bookshelf Speakers

• 95W Total Output.
• 165 mm Cone Woofer.
• 25 mm Dome Tweeter.
• Room Control Response Switch.
• High Trim.

• Solid and durable stand construction
• Strong and stable tripods
• Interchangeable colour rings

• Monitor Controller for Stereo Speakers
• Stream Bluetooth to Wired Speakers
• Add Subwoofer to Stereo Setup
• Prominent Volume Dial
• Headphone Output for Private Monitoring

• Universal stand for studio near-field monitors and wide range of loudspeakers
• Perfect for recording studios and listening environments
• Large 23 cm x 23 cm metal platform with soft rubberised padding reduces vibration
• Precise height adjustment in 5 steps from 30 cm up to 51 cm of elevation
• Heavy-duty steel construction for maximum weight capacity of 8.17 kg
• Floor base length of 24 cm per side

Anodized Aluminum Construction, Integrated Cable Management, 34" High, For the Sonos One, PLAY:1, or PLAY:3, Horizontal/Vertical Placement of PLAY:3

Supports Most Speakers up to 10 lb, 1/4"-20 Threaded Mounting to Speakers, Up to 27° of Tilt Adjustment, Up to 180° of Swivel Adjustment

• 50Hz – 20kHz Frequency Response
• 0° Phase Response
• 75W + 25W Class-D Amplifiers
• 5” Composite Fiberglass Woofer
• 1” ferrofluid cooled Soft Dome tweeter
• RCF Precision Waveguide

• Supports up to 20KG Speaker Weight
• Powder Coating for Smooth Operation and Smart Look
• Sturdy Steel Frame for Long Lasting Reliability

• Fits ART 912-A and 932-A
• 600D Polyester on PVC Exterior
• 190 T Taffeta Fabric on PVC Interior
• 0.4" Foam Rubber Padding
• Zipper + Touch-Fastener Closure

• 8" Woofer (80W)
• 1" Soft-Dome Tweeter (50W)
• Biamped Class-D Amplifier
• Frequency Response: 45 Hz to 21 kHz
• 24-Bit / 96 kHz Signal Path and DSP
• Sensitivity: 3 Settings

• Integrated cable management system cleanly conceals all cables
• Steel and aluminium construction provides rigidity and stability
• Space available for the addition of inert filler for further stability
• Ideal for KEF LS50 Meta and LS50 Wireless II, also supports other KEF Bookshelf Speakers
• Available in 5 colours

• Sold as a pair.
• Aluminium floor stands
• For T Series speakers
• Selecta-mount™ system

• Raise & Lower The Speaker with Ease.
• Easy-To-Use 2" Knob.
• Ergonomic Handle.
• Aluminium Tubing.
• M20 Threaded Socket.

• Air-Powered Shock For Lifting Speaker
• Adjustable from 3'8"(1.1 m) to 6'7"(2 m)
• Sturdy Tripod Base
• Works With JBL JRX200, PRX400, STX800
• Works with JBL EON, PRX700, VRX900

• Ideal for rental and event organisers
• Solid and durable construction
• Automatic LockPin®-technology
• Ergonomic handling
• Compact transportation

• 1/4” screw mounting
• Aluminium construction
• Integrated cable management system
• Fillable pillar
• Adjustable feet
• Rubber feet

• 1/4” screw mounting
• Aluminium construction
• Integrated cable management system
• Fillable pillar
• Adjustable feet
• Rubber feet

• 1/4” screw mounting
• Aluminium construction
• Integrated cable management system
• Fillable pillar
• Adjustable feet
• Rubber feet

• Comfortable height adjustment
• Gas spring with 18 kg lifting force
• Solid and durable
• Stable aluminium die-cast base
• Lightweight construction

• 9.5" Long-Throw MSP Woofer
• Class-D 300W Amplifier
• Sealed Enclosure
• Frequency Range: 22 to 175 Hz
• Adjustable LP Filter (50 to 150 Hz)
• Selectable HP Filter (Flat, 60, 80 Hz)

• For Music Production and Video Editing
• 1" Dome Tweeter and 4.5" Cone Woofer
• 26W Output Power per Speaker
• 3-Way 500 Hz Room Control Switch
• 3-Way 2 kHz HF Trim Switch
• Wide Frequency Response

• For PRX ONE

• Minimum Height: 850 mm
• Maximium Height: 1170 mm

• Compatible with nearly all 19” rack mountable equipment
• 2U hinged design allows 180 degree swing out
• Extendable depth from 236 to 400mm

• Includes Top & Bottom Covers
• Adjustable Depth up to 400mm
• Max Load 12Kgs

Speaker Decoupler, Horizontal-Fire Profile, For Speakers up to 88 lbs (40kg)

• Heavy-Duty Caster Board for PRX918XLF
• Handle Locking Strap Keeps Unit Secure
• 3/4" Plywood Base Contours to Subwoofer
• Clean Appearance
• Heavy-Duty 4" Swivel Casters
• Can Transport over Rugged Terrain

• Integrated cable management system cleanly conceals all cables
• Steel and aluminium construction provides rigidity and stability
• Space available for the addition of inert filler for further stability
• Ideal for KEF LS50 Meta and LS50 Wireless II, also supports other KEF Bookshelf Speakers

• Durable, water repellent 600D nylon shell
• 10 mm foam padding
• Dual zippers with single pull grip
• Carry straps positioned for even weight distribution
• Comfortable wrap-around handle

• Solid durable construction
• Heavy duty aluminium die-cast base
• Lightweight construction
• Interchangeable colour rings

Works with the Sonos One, PLAY:1, PLAY:3, Supports Wireless Speakers up to 10 lb, ±66° of Swivel with the Sonos One, ±66° of Swivel with Sonos PLAY:1