Studio Monitors

• 5" Woven Composite Woofer.
• 1" Ultra-Low-Mass, Silk-Dome HF Driver.
• EBM Waveguide Designed by Hugh Sarvis.
• Large Ported Enclosure for Deeper Bass.
• 80W Class AB Biamplification.

• EBM Waveguide Designed by Hugh Sarvis.
• 8" Woven Composite Woofer.
• 1.25" Silk-Dome HF Driver.
• Large Ported Enclosure for Deeper Bass.
• 140W Class AB Biamplification.

• 130 mm Composite Sandwich Woofer Cone
• 25 mm Titanium Dome Tweeter
• 160 W Peak Analogue AB Amplifier
• Elliptical Modelled Dispersion Waveguide
• Wide Horizontal Dispersion

• For Studio Recording, Mixing, Mastering
• Acoustic Tuning Adjustment Controls
• 1" Silk Dome Tweeter for Treble
• 4.5" Kevlar Woofer Cone for Bass
• 25W Class AB Amplification

• Compact Speakers for Content Creation.
• For Gaming, Monitoring, and More.
• Bluetooth 5.0 Streaming.
• 3.5" Woven Composite Woofer.
• 1" Silk-Dome Tweeter.

• 2x 3/4" Tweeters
• 2x 3" Woofers
• Bluetooth Capability
• 2x RCA Inputs
• 1x 3.5mm Input

• 120W Total Output
• 203 mm Cone Woofer
• 25 mm Dome Tweeter
• Room Control Response Switch
• High Trim

• Bi-Amplified Powered Reference Monitor
• Dual 41W Class-D Amplifiers
• Low Frequency Woofer: 5"
• Neodymium Woven-Composite Tweeter: 1"

• 8" Woofer & 1" Horn-Loaded Tweeter
• Coaxial Transducer with Coherence Align
• 200W RMS with Class D Amplification
• 102 dB Max SPL
• 32-bit/96kHz Active Floating-Point DSP

• Solid cast iron base
• Steel tray with isolating foam strips
• Black powder coating finish
• 50 kg load capacity
• Set of spikes included

• Coherent Time Response Across the Audio Spectrum
• High Performance Vented Design
• Built-in ARC Room Calibration
• X-MONITOR Technology
• Handcrafted in Italy
• X-MONITOR macOS and Windows Control Software

• Coherent Time Response Across the Audio Spectrum
• High Performance Vented Design
• Built-in ARC Room Calibration
• X-MONITOR Technology
• Handcrafted in Italy
• X-MONITOR macOS and Windows Control Software

• Deep sound with Bass Reflex speaker
• Compact, space-saving design
• Easy TV set up with HDMI ARC
• High sound quality from S-Force Front Surround
• Music playback with USB and Bluetooth

• Compact Speakers for Content Creation
• For Gaming, Monitoring, and More
• Bluetooth 5.0 Streaming
• 4.5" Woven Composite Woofer
• 1" Silk-Dome Tweeter

• Bi-Amplified Powered Reference Monitor
• Dual 41W Class-D Amplifiers
• Low-Frequency Woofer: 5"
• Neodymium Woven-Composite Tweeter: 1"

• Infinitely variable height adjustment
• Tilt angle up to +/- 15°
• 360° rotatable
• EVA padded bearing surface
• Anti-tip for the speaker

• 70W Total Output
• 127 mm Cone Woofer
• 25 mm Dome Tweeter
• Room Control Response Switch
• High Trim

• Multi-Point Bluetooth Technology
• Automatic Re-Pairing
• Pairing Button
• Connects via 3.5mm or RCA Connection
• Wireless Range up to 15 m

• 8" Composite Woofer
• 200W Class AB Amplifier
• 50 to 130 Hz Continuously Variable LPF
• Polarity Invert Switch
• Input Gain

• Weighted Base for Stability
• 781mm High
• 200x200mm Platform
• Foam Pads to Stop Scratching
• Max Load 10kgs
• Sold as a Pair

• 2 x 3.5" Polypropylene Mid-Woofers.
• 1 x Back-Chamber Silk Dome Tweeter.
• Class-D, Bi-Amped, 100W RMS.
• DSP Tuned Bass Reflex.
• Frequency Response: 40 Hz to 24 kHz.

• Patented Image Control Waveguide
• Next-generation JBL transducers
• Patented Slip StreamT low-frequency port
• Dual integrated, custom Class-D amplifiers
• New Boundary EQ settings

• Solid cast-iron base.
• Steel tray with isolating foam rests.
• Black powder coating.
• 50 kg load capacity.

• DSP engine included
• Higher SPL
• Better resolution
• Linear frequency and phase response
• Even deeper bass

• Composed of 2 black aluminum speaker stands (SPS023) and one transport bag.

• Perfect for recording studios and listening environments
• Large 25 cm x 25 cm metal platform with soft rubberised padding reduces vibration
• Precise height adjustment in 5 steps from 3 ft 0.93m up to 1.15m of elevation
• Heavy-duty steel construction for maximum weight capacity of 45 kg
• Floor triangular base length of 45 cm per side

• For Pro and Project Studios
• 2 x Combination 1/4" TRS/XLR Inputs
• 1 x Stereo 3.5mm Input
• 2 x XLR Outputs
• 1 x Stereo 3.5mm Output

• VCA Control and USB Audio Interface.
• Large Control Knob Sets Levels Faster.
• High-End VCA Technology.
• Controls 3 Pairs of Studio Monitors.
• 2 x Powerful Headphone Amplifiers.

• 2-way bass-reflex bi-amplified nearfield studio monitor
• 5" cone woofer and 1" dome tweeter
• 54Hz - 30kHz frequency response
• 45W LF plus 25W HF bi-amp system for total 70W power amplification
• ROOM CONTROL and HIGH TRIM response controls
• XLR and TRS phone jack inputs, balanced or unbalanced

• Tempered Glass Base
• Floor Spikes for Stability
• Max weight 10Kgs
• 250x250mm Glass Top Plate
• 600mm Hight

• For Music Production and Video Editing
• 0.75" Dome Tweeter and 3.5" Cone Woofer
• 26W Output Power per Speaker
• 3-Way 500 Hz Room Control Switch
• 3-Way 2 kHz HF Trim Switch
• Wide Frequency Response

• 95W Total Output
• 165 mm Cone Woofer
• 25 mm Dome Tweeter
• Room Control Response Switch
• High Trim

• For Music Production and Video Editing
• 1" Dome Tweeter and 4.5" Cone Woofer
• 26W Output Power per Speaker
• 3-Way 500 Hz Room Control Switch
• 3-Way 2 kHz HF Trim Switch
• Wide Frequency Response

• Long-throw 6-3/4" Woofer.
• Built-in 75 & 35 Watt Power Amps.

• For EON710, EON712, and EON715 Speakers

• 45Hz – 20kHz Frequency Response
• 0° Phase Response
• 100W + 40W Class-D Amplifiers
• 8” Composite Fiberglass Woofer
• 1” ferrofluid cooled Soft Dome tweeter
• RCF Precision Waveguide

• Ideal for rental and event organisers
• Extremely robust steel construction
• Double-braced legs

• Compact, Bookshelf Design
• Great for Accurate Sound in Small Places
• Stereo Bluetooth 5.0 Streaming
• 5.25" Woven Composite Woofer
• 1" Silk-Dome Tweeter
• Low- and High-Frequency Adjustment

• 8" Woofer and 1.25" Silk-Dome Tweeter
• 35 Hz to 20 kHz Frequency Response
• 105 dB SPL
• EBM Waveguide for a Wide Sweet Spot
• Control Level, HPF, MF Trim, and HF Trim
• Acoustic Space Filter

• 5" Woofer
• 1" Soft Dome Tweeter
• Bi-Amped Class-D Amplifier: 2 x 50W
• Frequency Response: 50 Hz to 21 kHz
• 24-Bit / 96 kHz Signal Path and DSP
• Sensitivity: 3 Settings

• Reinforced steel telescoping pole
• Holds up to 68kg
• Twist lock and secure locking pin
• Compatible with 35mm pole cups
• 760-1160mm height adjustment

• 5.25"(13.3 cm) Woofer
• 0.75"(1.9 cm) Dome Tweeter
• 35 W/Channel Amplifier
• XLR, 1/4", and RCA Inputs
• Stereo Headphone Jack

• Compatible with the Q150 Bookshelf Speakers

• 95W Total Output.
• 165 mm Cone Woofer.
• 25 mm Dome Tweeter.
• Room Control Response Switch.
• High Trim.

• 1/4" screw mounting for use with LSX.
• Aluminium construction for rigidity and stability.
• 10° upwards tilt.

• 180-Watt Bridge-Mode Amplifier
• Long-Throw 10" Woofer
• Advanced Waveguide
• XLR and RCA Input Connectors
• Low-Pass Filter for Crossover Alignment

• Solid and durable stand construction
• Strong and stable tripods
• Interchangeable colour rings

• Compact table clamp
• Infinitely variable height adjustment
• 360° rotatable
• Up to +/- 15° tilt angle
• EVA-padded surface
• Anti-tipping protection for speakers

• Monitor Controller for Stereo Speakers
• Stream Bluetooth to Wired Speakers
• Add Subwoofer to Stereo Setup
• Prominent Volume Dial
• Headphone Output for Private Monitoring

• Analogue Stereo Volume Control
• Fits Any Active Speaker Setup
• Minimum of Clutter and Wires
• High-Precision Level Control
• No Power Required

• 3-D Imaging Waveguide
• Dual-Layer Voice Coil
• Low Noise Port Tube

• Universal stand for studio near-field monitors and wide range of loudspeakers
• Perfect for recording studios and listening environments
• Large 23 cm x 23 cm metal platform with soft rubberised padding reduces vibration
• Precise height adjustment in 5 steps from 30 cm up to 51 cm of elevation
• Heavy-duty steel construction for maximum weight capacity of 8.17 kg
• Floor base length of 24 cm per side

• 3 x Sources and 2 x Monitor Pairs
• Classic Big Knob Volume Control
• Independent Trim on All Sources
• Mono, Mute, and Dim Functions
• 2x2 USB Recording Interface

• Loaded with the same transparent audio circuitry as Drawmer's high-end offerings
• Streamlined design is tailor-made for smaller project studios
• Accommodates two sets of studio monitors and a subwoofer
• Built-in headphone amplifier with dedicated level control
• 3 inputs including 2 TRS jacks and a 1/8" auxiliary jack

Anodized Aluminum Construction, Integrated Cable Management, 34" High, For the Sonos One, PLAY:1, or PLAY:3, Horizontal/Vertical Placement of PLAY:3

Supports Most Speakers up to 10 lb, 1/4"-20 Threaded Mounting to Speakers, Up to 27° of Tilt Adjustment, Up to 180° of Swivel Adjustment

• 50Hz – 20kHz Frequency Response
• 0° Phase Response
• 75W + 25W Class-D Amplifiers
• 5” Composite Fiberglass Woofer
• 1” ferrofluid cooled Soft Dome tweeter
• RCF Precision Waveguide

• Supports up to 20KG Speaker Weight
• Powder Coating for Smooth Operation and Smart Look
• Sturdy Steel Frame for Long Lasting Reliability

• 1/4" screw mounting for use with LSX.
• Aluminium construction for rigidity and stability.
• 40° downward tilt.
• 90° sideways speaker positioning in both directions.
• Integrated cable management system.

• 64-Watt reference-class studio monitors
• Advanced Waveguide technology
• Ultra-high resolution 1" silk dome tweeters
• Long-throw 4.5" woofers
• Two stereo analog inputs
• Low and high frequency controls

• 8" Woofer (80W)
• 1" Soft-Dome Tweeter (50W)
• Biamped Class-D Amplifier
• Frequency Response: 45 Hz to 21 kHz
• 24-Bit / 96 kHz Signal Path and DSP
• Sensitivity: 3 Settings

• Sold as a pair.
• Aluminium floor stands
• For T Series speakers
• Selecta-mount™ system

• Air-Powered Shock For Lifting Speaker
• Adjustable from 3'8"(1.1 m) to 6'7"(2 m)
• Sturdy Tripod Base
• Works With JBL JRX200, PRX400, STX800
• Works with JBL EON, PRX700, VRX900

• 8" Woofer and 1.25" Silk-Dome Tweeter
• 35 Hz to 20 kHz Frequency Response
• 105 dB SPL
• Single Point-Source Coaxial Design
• Wide Sweet Spot, Precise Phase Alignment
• Control Level, HPF, MF Trim, and HF Trim

• 6.5" Woofer and 1.25" Silk-Dome Tweeter
• 35 Hz to 20 kHz Frequency Response
• 103 dB SPL
• Single Point-Source Coaxial Design
• Wide Sweet Spot, Precise Phase Alignment
• Control Level, HPF, MF Trim, and HF Trim

• 5.25" Woofer and 1" Silk-Dome Tweeter
• 48 Hz to 20 kHz Frequency Response
• 102 dB SPL
• EBM Waveguide for a Wide Sweet Spot
• Control Level, HPF, MF Trim, and HF Trim
• Acoustic Space Filter

• Gold coated connectors
• Full range sound
• High and low-level inputs
• 33-20KHz frequency response

• For Music Production and Video Editing
• 1" Dome Tweeter and 4.5" Cone Woofer
• 26W Output Power per Speaker
• 3-Way 500 Hz Room Control Switch
• 3-Way 2 kHz HF Trim Switch
• Wide Frequency Response

• Ideal for rental and event organisers
• Solid and durable construction
• Automatic LockPin®-technology
• Ergonomic handling
• Compact transportation

• Comfortable height adjustment
• Gas spring with 18 kg lifting force
• Solid and durable
• Stable aluminium die-cast base
• Lightweight construction

• Stereo active speaker system
• 2-way 5 ¼" speaker system
• Recessed mounting bracket
• Remote wall panel input connection
• Standby energy saving mode
• Vertical and horizontal mounting

• For PRX ONE

• Raise & Lower The Speaker with Ease.
• Easy-To-Use 2" Knob.
• Ergonomic Handle.
• Aluminium Tubing.
• M20 Threaded Socket.

• Connectivity
• Easy Operation
• Striking and Functional Design

• Includes Top & Bottom Covers
• Adjustable Depth up to 400mm
• Max Load 12Kgs

• Integrated cable management system cleanly conceals all cables
• Steel and aluminium construction provides rigidity and stability
• Space available for the addition of inert filler for further stability
• Ideal for KEF LS50 Meta and LS50 Wireless II, also supports other KEF Bookshelf Speakers

• Heavy-Duty Caster Board for PRX918XLF
• Handle Locking Strap Keeps Unit Secure
• 3/4" Plywood Base Contours to Subwoofer
• Clean Appearance
• Heavy-Duty 4" Swivel Casters
• Can Transport over Rugged Terrain

• 1/4” screw mounting
• Aluminium construction
• Integrated cable management system
• Fillable pillar
• Adjustable feet
• Rubber feet

• 1/4” screw mounting
• Aluminium construction
• Integrated cable management system
• Fillable pillar
• Adjustable feet
• Rubber feet

• Compatible with nearly all 19” rack mountable equipment
• 2U hinged design allows 180 degree swing out
• Extendable depth from 236 to 400mm

• 1/4" screw mounting for use with LSX.
• Aluminium construction for rigidity and stability.
• 40° downward tilt.
• 90° sideways speaker positioning in both directions.
• Integrated cable management system.

• Gold coated connectors
• Full range sound
• High and low-level inputs
• 35-20KHz frequency response

• Durable, water repellent 600D nylon shell
• 10 mm foam padding
• Dual zippers with single pull grip
• Carry straps positioned for even weight distribution
• Comfortable wrap-around handle

• Solid durable construction
• Heavy duty aluminium die-cast base
• Lightweight construction
• Interchangeable colour rings

Works with the Sonos One, PLAY:1, PLAY:3, Supports Wireless Speakers up to 10 lb, ±66° of Swivel with the Sonos One, ±66° of Swivel with Sonos PLAY:1

• 64W reference-class studio monitors
• Advanced Waveguide technology
• Ultra-high resolution 1" silk dome tweeters
• Long-throw 3.5" woofers
• Two stereo analog inputs
• Low and high frequency controls

• DSP engine included
• Higher SPL
• Better resolution
• Linear frequency and phase response
• Even deeper bass

• 64W reference-class studio monitors
• Advanced Waveguide technology
• Ultra-high resolution 1" silk dome tweeters
• Long-throw 3.5" woofers
• Two stereo analog inputs
• HQ Bluetooth 5.3 audio streaming

• For Music Production and Video Editing
• 0.75" Dome Tweeter and 3.5" Cone Woofer
• 26W Output Power per Speaker
• 3-Way 500 Hz Room Control Switch
• 3-Way 2 kHz HF Trim Switch
• Wide Frequency Response

• 120W Total Output.
• 203 mm Cone Woofer.
• 25 mm Dome Tweeter.
• Room Control Response Switch.
• High Trim.

• With base and pillar made of aluminum
• Rubberized surface for up to two headphones
• With two cable slots for in-ear headphones

• 8" Long-Throw Kevlar Woofer.
• 1" Dome Tweeter.
• Class A/B Amplifiers.
• Active Protection Circuitry.
• XLR, 1/4", and RCA Inputs.

• Supports up to 30KG Speaker Weight
• Powder Coating for Smooth Operation and Smart Look
• Sturdy Steel Frame for Long Lasting Reliability

• Sturdy, durable and Ported Low-Vibration Speaker Cabinets
• Overload Protection
• Balanced XLR and 1/4" TRS Input Connectors

• Isolate Your Speakers for Accuracy
• Designed for Small Speakers
• 14 Variations of Height and Tilt
• Durable Plastic/Steel Tube Construction