NITECORE MH1A Rechargeable LED Flashlight has been discontinued, here are some related products you might like:
NITECORE MH1A Rechargeable LED Flashlight
Overview
Description
The MH1A Rechargeable LED Flashlight from Nitecore features three normal outputs from 7 to 81 lumens, with a 550-lumen turbo mode. An intelligent two-stage pushbutton switch allows you to programme your desired output, including a disorientating strobe or SOS emergency signal. To activate the 550-turbo mode, lightly tighten the head. This gives you access to your preferred operating output, while allowing you to quickly change to turbo mode.
Built for daily use, the aluminium housing has a scratch and corrosion-resistant hard-anodised finish, and a crenellated bezel can be used for self-defence or as a window breaker. The light is submersible to 6.6', and impact-resistant to 5'. Its circuitry allows it to run on disposable or rechargeable batteries. A micro-USB charging cable and a 14500 battery are included to charge the battery in the light.
Key Features
Accessories
- Nitecore 14500 Li-ion battery(NL147)
- USB cable
- Holster
- Clip
- Lanyard
- spare Switch Cap
- Spare O-ring
Light Performance
- 550-lumen Turbo mode
- Three normal outputs from 7 to 81 lumens
- Tight centre cone of light with large dimmer peripheral ring
- Deep, smooth aluminium reflector produces smooth beam without holes or hotspots
- SOS signal automatically cycles through Morse-code sequence
- Strobe-mode causes temporary blindness and disorientation
Switching
- Two-stage tailcap switch
- Partially press to cycle through the outputs, release to set desired output
- Click to turn on programmed output
- Tighten head to choose Turbo, then click to activate
- Intelligent switch stores preferred brightness setting
Construction Details
- Aluminium alloy housing
- Type III hard-anodised finish
- Corrosion and scratch resistant
- Anti-reflective coated, tempered lens
- Textured diamond grip for sure handling
- Submersible to 6.6', impact-resistant to 5'
- Crenellated self-defence/window breaker bezel
- U-shaped tailcap shroud helps prevent accidental activation
- Compatible with lithium disposable, and NiMH, NiCd, and Li-Ion rechargeable batteries
- Reverse polarity protection protects light if batteries are installed incorrectly
- Batteries charge in the light
- Octagonal anti-roll collar
- Detachable clip
Specifications
Illumination Source |
Cree XM-L U2 LED |
Output Range |
* Low: 7 lumen * Moed: 18 lumen * High: 81 lumen * Turbo: 550 lumen |
Battery / Runtime |
1 x 14500 li-lion rechargeable battery : * Low: 23.0 hr * Moed: 11.5 hr * High: 4.0 hr * Turbo: 0.75 hr |
Charge Time |
2 hr, with 14500 li-ion battery |
Construction |
Aluminium |
Waterproofing |
IPX8 rated, submersible to 6.6' (2 m) |
Dimensions |
* Head: 1.0" (2.5 cm) * Body: 5.0 x 0.9" (12.7 x 2.2 cm) |
Weight |
1.6 oz (75 g), without battery |
Reviews
(no ratings yet)Give it a quick rating:
Thanks for your rating!
Write a review
Details
- Product: NITECORE MH1A Rechargeable LED Flashlight
- Manufacturer: Nitecore
- Model: MH1A
- SKU: MH1A
- RM Product #: 24262