NITECORE MT1A LED Flashlight has been discontinued, here are some related products you might like:
NITECORE MT1A LED Flashlight
Overview
Description
Note: Product does not include batteries
The MT1A LED Flashlight from Nitecore is a compact light that features three normal outputs from 5 to 50 lumens, with a 140-lumen turbo mode. An intelligent two-stage pushbutton switch allows you to programme your desired output, including a disorientating strobe or SOS emergency signal. To activate the turbo mode, just tighten the head slightly. This gives you access to your preferred operating output, while allowing you to quickly change to turbo mode.
Built for daily use, the aluminium housing has a scratch and corrosion-resistant hard-anodised finish, is submersible to 6.6', and impact-resistant to 5'. At just over four inches long and weighing only a few ounces, the MT1A is powerful enough to use as a primary light, yet fits comfortably in a pocket. The light runs on disposable lithium or li-ion rechargeable batteries, and there is a built-in reverse polarity protection that prevents damage to the light if the batteries are put in incorrectly.
Key Features:
Light Performance
- 140-lumen turbo mode
- Three outputs from 5 to 50 lumens
- White Cree XP-G R5 LED emitter
- Tight centre cone of light with large dimmer peripheral ring
- Deep, smooth aluminium reflector produces smooth beam without holes or hotspots
- SOS signal automatically cycles through Morse-code sequence
- Strobe-mode causes temporary blindness and disorientation
Switching
- Two-stage tailcap switch and rotating body switch
- Partially press to cycle through the outputs, release to set desired output
- Click to turn on programmed output
- Turn rotary switch on the body to select Turbo, then click to activate
- Intelligent switch stores preferred brightness setting
Construction Details
- Aluminium alloy housing
- Type III hard-anodised finish
- Corrosion and scratch resistant
- Anti-reflective coated, tempered lens
- Textured diamond grip for sure handling
- Submersible to 6.6', impact-resistant to 5'
- Removable titanium-plated stainless steel clip
- U-shaped tailcap shroud helps prevent accidental activation
- Lightweight and compact design to fit comfortably in a pocket
- Compatible with lithium disposable, and li-ion rechargeable batteries
- Reverse polarity protection protects light if batteries are installed incorrectly
Specifications
Illumination Source |
Cree XP-G R5 LED |
Output Range |
* Low: 5 lumen * Moed: 20 lumen * High:50 lumen * Turbo: 140 lumen |
Battery / Runtime |
1 x AA Battery : * Low: 60.0 hr * Moed: 18.0 hr * High: 5.5 hr * Turbo: 1.5 hr |
Construction |
Aluminium alloy |
Waterproofing |
IPX8 rated, submersible to 6.6' (2 m) |
Dimensions |
* Head: 0.9" (2.3 cm) * Body: 4.1 x 0.8" (10.5 x 2.2 cm) |
Weight |
1.9 oz (55 g) |
In The Box
- NITECORE MT1A LED Flashlight
- Clip
- Lanyard
- Spare plastic cap
- Spare O-ring
Reviews
(no ratings yet)Give it a quick rating:
Thanks for your rating!
Write a review
Details
- Product: NITECORE MT1A LED Flashlight
- Manufacturer: Nitecore
- Model: MT1A
- SKU: MT1A
- RM Product #: 24269