Onkyo A-9010 Integrated Stereo Amplifier (Black) has been discontinued, here are some related products you might like:
Onkyo A-9010 Integrated Stereo Amplifier (Black)
Features
- Up to 44W per Channel at 8 Ohms
- 2-Channel Design
- 4 x Stereo RCA / 1 x Phono Stereo RCA-In
- Optical / Digital Coaxial / 3.5mm In
- Integrated DAC
Description
Enjoy high-resolution stereo sound with the Onkyo A-9010 Integrated Stereo Amplifier . It delivers up to 44W per channel at 8 Ohms and has an optical input, a digital coaxial input, a phono input, and four stereo RCA inputs. The A-9010 features an integrated DAC and a front-panel 1/4" headphone jack.
Features
More Digital and Analogue Connections
The A-9010 features 192 kHz/24-bit-capable coaxial and 96 kHz/24-bit optical inputs to accept Hi-Res, lossless, or compressed audio signals from source devices including computers and media streamers. Digital inputs let you explore the world of computer audio, send the sound from your TV to the amp and speaker system, or allow the A-9010's Wolfson D/A conversion stage to take over when playing compact discs.
Separate Headphone Amplification Circuitry
The A-9010 includes an independent headphone amplifier powerful enough to drive your high-impedance headphones. Thanks to the digital inputs and Wolfson DAC, you can plug in your computer and enjoy stadium-sized sound without bothering anyone.
Enjoy Pure Analogue Playback of Vinyl Records
The A-9010 features a built-in MM phono equaliser, allowing you to connect a turntable and enjoy your record collection with dynamic and engaging analogue sound. When an incoming analogue signal is detected, the receiver automatically shuts down the digital circuitry to prevent interference so you can enjoy clear and detailed sound.
Authentic High-Fidelity Amplification System
Wide Range Amplifier Technology (WRAT) uses a high current to maintain control of the speaker drivers for accurate audio reproduction, from the most delicate piano passages to an orchestra in full flight. To achieve this, the A-9010 features an EI transformer and audio-grade capacitors with an extruded aluminium heat sink to keep the amps cool. The amplifier circuits have discrete low-impedance output stages with heavy-duty transistors for instantaneous power and low distortion, while closed ground-loop circuits help to minimise noise. Together, these technologies deliver detailed sound whether you're listening to compressed digital music or a vinyl record.
Wolfson Digital-to-Analogue Convertor
The Wolfson WM8718 is capable of decoding PCM signals to 192 kHz and 24-bit resolution.
Quality Construction Equals Better Performance
The A-9010's chassis is designed to isolate the audio signal from vibrations that cause interference during the amplification process. Another highlight is the gold-plated and banana-plug-compatible speaker posts with transparent screw-type knobs. The speaker terminals are connected to the amp circuitry inside the receiver via thick speaker plates rather than speaker relays to preserve signal integrity.
Control Your System with One Remote
Remote Interactive (RI) terminals let you operate other compatible audio components (such as a CD player or tuner) in your system using a single remote control. RI capability also adds functionality when Onkyo's DS-A5 RI Dock for iPod is connected to another component, including System On/Off, Auto Power On, and Auto Selector
Additional Features
- Wolfson WM8718 192 kHz/24-bit digital-to-analogue convertor
- Coaxial supports sampling rates up to 192 kHz/24-bit (optical 96 kHz/24-bit)
- Independent headphone amplification circuitry
- High-current, low-impedance drive
- Four audio-grade capacitors
- Extruded aluminium heat sink
- Integrated speaker plates maintain signal quality
- Gold-plated, screw-type, banana-plug-compatible speaker posts
- Automatic digital circuitry shutdown function for pure analogue sound
- Tone controls (Bass/Treble/Balance)
Specifications
Amplifier | |
Number of Channels | 2 |
Power Rating | 44 W per channel @ 8 Ohms, 1 kHz, 0.08% THD, 2-channels driven, FTC |
Speaker Impedance | 4 to 16 Ohms |
Frequency Response | 10 Hz to 100 kHz, +1, -3 dB (Line 1) |
Signal to Noise Ratio | Line-In, IHF-A: 92 dB Phono MM-In, IHF-A: 78 dB |
Total Harmonic Distortion (THD) | 0.08% @ 1 kHz, 1 W output |
Damping Factor | 95 (1 kHz, 8 Ohms) |
Tone Control | Bass: ±10 dB, 100 Hz Treble: ±10 dB, 10 kHz Balance |
Connectors | |
Input | 4 x Stereo RCA L/R 1 x Phono stereo RCA L/R 1 x Optical TOSLINK 1 x Digital coaxial 1 x 1/8" (3.5 mm) line (front) |
Output | 1 x Stereo RCA L/R 1 x 1/4" (6.35 mm) headphone (front) |
Speaker Connectors | 2 x Gold-plated binding post pairs |
Other Connectors | 1 x Remote Interactive out |
Input Sensitivity/Impedance | Line: 150 mV / 100 kOhms Phono MM: 3.0 mV / 47 kOhms |
Output Level and Impedance | Line Out: 0.15 V / 2.2 kOhms Phono Overload: 94 mV (MM, 1 kHz, 0.5%) |
General | |
Power Requirements | 230 VAC, 50 Hz |
Power Consumption | Operational: 140 W No Sound: 20 W Standby: 0.3 |
Dimensions (W x H x D) | 435 x 129.5 x 332.5 mm |
Weight | 6.5 kg |
In The Box
- Remote Control
- 2 x AAA Batteries
- Limited 2-Year Warranty
Reviews
(no ratings yet)Give it a quick rating:
Thanks for your rating!
Write a review
Details
- Product: Onkyo A-9010 Integrated Stereo Amplifier (Black)
- Manufacturer: Onkyo
- Model: A-9010B
- SKU: A-9010B
- RM Product #: 47176
- Warranty: 1 year manufacturer warranty