Onkyo A-9150 Integrated Stereo Amplifier (Silver) has been discontinued, here are some related products you might like:
Onkyo A-9150 Integrated Stereo Amplifier (Silver)
This product is no longer available
Features
- Nuanced Musicality Delivered with Discrete SpectraModule™
- Dedicated MM/MC Phono Circuit Board
- Customized High-Current Transformer and Custom Audio-Grade Capacitors
- DIDRC Filter and Hi-Grade DAC for Natural Sound
- Solid Build with High-grade Terminals
Description
Onkyo Integrated Stereo Amplifier. High current power supply. Refined power amplification circuit with discrete SpectraModule. Hi-grade DAC and DIDRC filter. Robust flat chassis.
Features
Advanced
- 60W/Ch (4O, 20Hz~20kHz, 0.08% THD, 2 Channels Driven, IEC)
- Discrete SpectraModule Produces High Instantaneous Voltage for Immersive Soundstaging, Improved Instrument Separation, and Lively Transient Response
- DIDRC Filter Prevents Ultra-high-frequency Distortion Affecting Audible Sound
- High-Current Power Supply Transformer and Two Hi-Grade Customised Capacitors
- High-Current Low-Impedance Drive for Enhanced Speaker Control
- Optimum Gain Volume Control Circuitry Isolates Signal from Noise Floor to Prevent Distortion at Lower Volume
- Symmetrical L/R Channel Layout with Equal Signal-path Lengths to Minimise Stereo Playback Errors
- Isolated Processing, Pre-amplification, and Power Amplification Circuitry Reduces Electrical Interference on Audio Signal
- Large Extruded Aluminium Heat Sink
- AKM (AK4452) 768kHz/32-bit Digital-to-Analog Converter
- Direct Mode for Reproduction Faithful to Original Source
- Front-panel A/B Speaker Drive Selector
- Available in Black or Silver Finish
Inputs and Connections
- 4 Gold-plated Analogue RCA Audio Inputs (Rear)
- 2 Optical Digital Inputs (192kHz/24-bit Capable)
- 2 Gold-plated Coaxial Digital Audio Inputs (192kHz/24-bit Capable)
- 2 Pairs of Gold-plated Speaker Posts (A+B)
- Gold-plated Phono Input (MM/MC) to Suit Any Turntable
- 6.3mm Headphone Jack
- Gold-plated Main Input
- Gold-plated Pre Out
- RI (Remote Interactive) Remote Control Input
Additional
- Tone Controls (Bass/Treble/Balance)
- Aluminum Front Panel and Aluminium Volume Control Knob
- Rigid Steel Chassis to Reduce Resonance
- Stable Isolator Feet Minimize Vibration-borne Interference
- Efficient 0.2W Power Consumption on Standby
- Full-sized and Full-function RI Remote Control
Specifications
| Amplifier Section | |
| Power Output | 60W/Ch (4O, 20Hz~20kHz, 0.08% THD,2 Channels Driven, IEC) |
| THD+N (Total Harmonic Distortion + Noise) | 0.08% (20Hz~20kHz, Rated Power) |
| Input Sensitivity and Impedance | 200mV/220kO (Line) 4.0mV/47kO (Phono MM) 0.4mV/120O (Phono MC) |
| Rated RCA Output Level and Impedance | 0.2V/2.3kO (Line Out) |
| Phono Overload (MM) | 70mV (1kHz, 0.5%) |
| Phono Overload (MC) | 7mV (1kHz, 0.5%) |
| Frequency Response | 10Hz~100kHz/+1dB, -3dB (Line 1, Direct) |
| Tone Control | ±10dB, 100Hz (Bass) ±10dB, 10kHz (Treble) |
| Signal-to-Noise Ratio | 107dB (Line 1, IHF-A) 82dB (Phono MM, IHF-A) 73dB (Phono MC, IHF-A) |
| Headphone Output Impedance | 390O |
| General | |
| Power Supply | 220V230V AC, 50/60Hz |
| No-Sound Power Consumption | 35W |
| Power Consumption | 160W |
| Standby Power Consumption | 0.2W |
| Dimensions (W x H x D) | 435 x 139 x 331mm |
| Weight | 9.2kg |
| Carton | |
| Dimensions (W x H x D) | 572 x 264 x 419mm |
| Weight | 11.5kg |
| Supplied Accessories | • Instruction manual • AC power cord • Remote controller • AAA (R03) batteries x 2 |
Specifications
| Power Output: | 60 W/Ch (4 Ω, 20 Hz−20 kHz, 0.08% THD, 2 Channels Driven, IEC) |
| THD+N (Total Harmonic Distortion + Noise): | 0.08% (20 Hz–20 kHz, Rated Power) |
| Damping Factor: | 80 (1 kHz, 8 Ω) |
| Input Sensitivity and Impedance: | 200 mV/220 kΩ (Line) |
| 4.0 mV/47 kΩ (Phono MM) | |
| 0.4 mV/120 Ω (Phono MC) | |
| Rated RCA Output Level and Impedance: | 0.2 V/2.3 kΩ (Line Out) |
| Phono Overload (MM): | 70 mV (1 kHz, 0.5%) |
| Phono Overload (MC): | 7 mV (1 kHz, 0.5%) |
| Frequency Response: | 10 Hz−100 kHz / +1 dB, -3 dB |
| (Line 1, Direct) | |
| Tone Control: | ±10 dB, 100 Hz (Bass) |
| ±10 dB, 10 kHz (Treble) | |
| Signal-to-Noise Ratio: | 107 dB (Line 1, IHF-A) |
| Signal-to-Noise Ratio: | 82 dB (Phono MM, IHF-A) |
| Signal-to-Noise Ratio: | 73 dB (Phono MC, IHF-A) |
| Speaker Impedance: | 4 Ω–16 Ω |
| Headphone Output Impedance: | 390 Ω |
| General | |
| Power Supply: | AC 220–230 V~, 50/60 Hz |
| No Sound Power Consumption: | 35 W |
| Power Consumption: | 160 W |
| Standby Power Consumption: | 0.2 W |
| Dimensions (W x H x D): | 435 x 139 x 331 mm |
| Weight: | 9.2 kg |
In The Box
- Instruction manual
- AC power cord
- Remote controller
- AAA (R03) batteries x 2
Reviews
(no ratings yet)
Own or use this product?
Give it a quick rating:
Thanks for your rating!
Share your thoughts with other customers:Give it a quick rating:
Thanks for your rating!
Write a review
Details
- Product: Onkyo A-9150 Integrated Stereo Amplifier (Silver)
- Manufacturer: Onkyo
- Model: A9150S
- SKU: A9150S
- RM Product #: 49583
- Warranty: 1 year manufacturer warranty
Recently Viewed
View AllOnkyo A-9150 Integrated Stereo Amplifier (Silver)
Loading...
