Onkyo P-3000R 2-Channel Hi-Fi Pre-Amplifier (Black)
Overview
Description
The black Onkyo P-3000R Hi-Fi Pre-Amplifier is a streamlined, 2-channel pre-amplifier that packs a treasure trove of stunning audio technology. The P-3000R handles both analogue and digital sources, with connectivity options including AES / EBU digital connectors and a USB device for PC audio. Separate 192 kHz / 32-bit TI Burr-Brown DACs for each channel ensure exact digital-to-analogue conversion. The P-3000R minimises interference and maintains signal quality, employs noise-reducing DIDRC (Dynamic Inter-modulation Distortion Reduction Circuitry) technology, a vibration-resistant chassis design, and independent amplifier circuitry. Moreover, the P-3000R's bi-amping capability provides you with great flexibility in how you set up your system.
Features
- DIDRC (Dynamic Inter-Modulation Distortion Reduction Circuitry): The DIDRC technology captures noise beyond audible range and prevents beats from penetrating in to the audible range.
- Separate Digital / Analogue Circuitry: To prevent unwanted interference, the P-3000R employs physically separate circuitry for digital and analogue processing. It also features separate transformers for digital and analogue circuitry.
- Side-Mounted Circuit Board Construction: The circuit boards inside the P-3000R is cushioned by internal struts and affixed to the front, side, and rear panels. This method of construction prevents vibrations from the chassis from adversely affecting the circuit boards.
- PLL (Phase Locked Loop) Ultra-Low Jitter Technology: PLL ultra-low jitter technology reduces jitter by comparing the input and output phases of the digital signal and creating a precise clock waveform. This enhances the precision of digital signal processing and noticeably improves perceived audio quality.
- Playback of Various Music Sources Including PC Audio Via USB: Using the USB port on the rear panel of the P-3000R, you can connect your PC and playback 192 kHz / 32-bit HD audio formats.1Please Note:Playback of PC audio requires dedicated software that can be downloaded from an Onkyo website
close
- Separate massive transformers for digital / analogue circuitry (Toroidal transformer for analogue circuitry)
- Separate anti-vibration aluminium panels for top, front, and sides
- Sampling rate convertor (up to 192 kHz)
- Direct mode
- Tone control (bass / treble)
- Independent headphone amplifier
- Discrete phono equaliser
- Phono input (mm)
- AES/EBU balanced digital input with XLR connector
- 1 optical output and 5 digital inputs (1 AES/EBU, 2 optical and 2 coaxial)
- Separate L / R bi-amping-capable pre-outs
- Gold-plated, machined solid brass, 19mm - pitch audio terminals
- 12V trigger out
- Display dimmer (normal / dim / off)
- Separate TI (Burr-Brown) 192 kHz/32-bit DACs (PCM1795) for L/R channels
- Detachable 5.9' power cord
Specifications
General | |
THD + Noise | 0.005% (20 Hz to 20 kHz, Power Rated) |
Input Sensitivity/Impedance | Unbalance: Line: 200 mV / 47 kO Phono mm: 2.7 mV / 47 kO |
Output Level and Impedance | Rated RCA: Pre Out: 1 V / 330 O |
Phono Overload | 80 mV (mm 1 kHz 0.5 %) |
Frequency Response | Line: 5 Hz to 100 kHz / +0, -3 dB |
Tone Control | Bass: ±8 dB, 50 Hz Treble: ±8 dB, 20 kHz |
Signal to Noise Ratio | Direct, IHF-A: 110 dB Phono, IHF-A: 80 dB |
Power Supply | 120 VAC, 60 Hz |
Power Consumption | 26 W |
Standby Power Consumption | 0.2 W |
Audio Input | |
Digital Inputs | Optical: 2 Coaxial: 2 |
Analogue Input | Phono, CD, Line 1, Line 2, Tape (Line 3) |
Balanced Input | AES/EBU (Digital) |
Audio Output | |
Digital Outputs | Optical: 1 Digital Output Sampling Rate: 32 kHz/44.1 kHz/48 kHz/88.2 kHz/96 kHz compatible (OPT) |
Analogue Output | Tape (Line) |
Pre-Out | 2 |
Phones | 1 (6.3 ø) |
System Requirements | |
Operating System | Windows 7 (32 / 64 bits) / Windows Vista (32 / 64 bits) / Windows® XP (32 / 64 bits) SP3 or later |
CPU | Intel Pentium 4 processor 1.6 GHz or higher processor |
RAM | 512 MB or greater |
HDD | 60 MB or greater free hard drive space |
Supported Models | PC / AT compatible machine equipped with a USB port compliant with the USB standard Rev2.0 HSIntel USB host controller is recommended |
Miscellaneous | |
Interface | USB: 1 12 V Trigger Out: 1 RI: 1 |
Dimensions | 17.1 x 3.9 x 13.1" (435.0 x 99.0 x 333.1 mm) |
Weight | 24.3 lb (11.0 kg) |
Reviews
(no ratings yet)Give it a quick rating:
Thanks for your rating!
Write a review
Details
- Product: Onkyo P-3000R 2-Channel Hi-Fi Pre-Amplifier (Black)
- Manufacturer: Onkyo
- Model: P-3000R
- SKU: P-3000R
- RM Product #: 47359
- Warranty: 1 year manufacturer warranty