Onkyo TX-RZ1100 9.2-Channel Network A/V Receiver has been discontinued, here are some related products you might like:
Onkyo TX-RZ1100 9.2-Channel Network A/V Receiver
Features
- Up to 140W per Channel at 8 Ohms
- AccuEQ Sound Optimization
- 4K Ultra HD Upscaling and Pass-Through
- HDMI with 3D and Audio Return Channel
- 8x HDMI-In / 2x HDMI-Out
Description
Enjoy immersive multi-channel sound with the Onkyo TX-RZ1100 9.2-Channel Network A/V Receiver. It delivers up to 140W of power per channel at 8 Ohms, and features Dolby Atmos and DTS:X compatibility for object-based audio support. Built-in Bluetooth and AirPlay support allow the receiver to wirelessly stream music from compatible sources, such as smartphones and tablets.
Onboard Wi-Fi and Ethernet connectivity allow the TX-RZ1100 to access a variety of Internet-based music sources, like Spotify Connect, Tidal, Internet radio, and more. With eight HDMI inputs and two HDMI outputs, this receiver can act as a video switcher for your HD source components. It will pass through 3D and 4K signals and upscale 1080p signals via HDMI to near-4K quality for enhanced viewing when paired with a 4K display. The receiver also has a USB port for accessing media stored on USB flash drives. AccuEQ sound optimisation will calibrate the receiver to your speakers and room setup for a tailored listening experience.
Features
Multi-Zone Audio and Video
Pre-outs for Zones 2 and 3 as well as Powered Zone 2 and 3 capability open up distributed audio options throughout the home backed by dedicated Zone 2 and Zone 3 DACs. Select HDMI terminals support 4K/60 Hz video, 4:4:4 Colour Space, HDCP 2.2 copy protection, and High Dynamic Range (HDR) with BT.2020 support for UHD streaming and broadcasting. A 4K and HDCP 2.2/HDR-compatible Zone 2 HDMI output allows you to enjoy A/V sources connected to the receiver in another room.
THX-Certified for Theatre-Like Sound
THX certification is designed to guarantee the same high volume and low distortion levels you experience in a commercial theatre in your listening room. THX Select2 Plus is typically recommended for screen-to-seat viewing distances of 10 to 12 feet. To achieve THX certification, amplifiers must undergo independent bench testing to satisfy THX requirements.
High Instantaneous Current
The TX-RZ1100's amps deliver high instantaneous current to grip and control speakers, moving them through their entire range. It's designed to provide a significant boost to the dynamism, detail, and accuracy of music and movie soundtracks for an enhanced listening experience.
With High-Current Digital Amplification, Power Meets Control
The TX-RZ1100 combines high-current architecture with digital amplification and filtering technology. Noise-reduction hardware, including a high-output transformer, is designed to deliver fast dynamics, thrilling power, and precise detail resolution.
Vector Linear Shaping Circuitry
The TX-RZ1100 features Vector Linear Shaping Circuitry, or VLSC, across all channels. VLSC is designed to virtually remove digital pulse noise for a smooth analogue signal. Data is converted between sampling points, and these points are joined with analogue vectors in real-time to produce a smooth output wave form. The result is a virtually noiseless, smooth analogue signal based on the digital source. It can bring out even the subtlest nuances in audio sources.
Sound from Above
Packing 9.2 channels, the TX-RZ1100 unlocks a full 5.2.4-channel Dolby Atmos and DTS:X experience via four in-ceiling or up-firing speakers. Included 11.2 multi-channel pre-outs enable 7.2.4-channel layouts when used with an additional stereo amplifier.
FireConnect Multi-Room Audio Upgradable
A firmware update enables almost any audio source connected to the receiver – from vinyl to streaming audio – to be sent wirelessly via FireConnect, powered by Blackfire, to an optional compatible speaker placed anywhere in your home. It's designed to be stable, fast, and easy to control with a mobile device.
AccuEQ Calibration and Optimisation
AccuReflex, part of the AccuEQ room calibration suite, is designed to phase-match height and floor-standing speakers for a seamless reproduction of object-based sound. AccuEQ optimises the entire system to suit your space without affecting front-speaker characteristics for pure stereo listening.
Enhanced Performance and Ease of Installation
The Onkyo TX-RZ1100 is designed to deliver enhanced audio performance in the configurations you want.
Specifications
Main Unit | |
Output Power | 140 W per channel @ 8 Ohms, 1 kHz, 0.08% THD, 2-channel driven, FTC 200 W per channel @ 6 Ohms, 1 kHz, 0.9% THD, 1-channel driven, FTC |
Dynamic Power | 320 W @ 3 Ohms, front 270 W @ 4 Ohms, front 160 W @ 8 Ohms, front |
Output Impedance | 4 to 16 Ohms |
Channels | 9.2 |
Tuner | AM / FM |
Frequency Response | 5 Hz to 100 kHz (+1, -3 dB) (direct/pure audio) |
Signal to Noise Ratio | 108 dB (line, IHF-A) 90 dB (phono, IHF-A) |
Surround Modes | DTS: DTS HD Master Audio Dolby: Dolby TrueHD, Dolby Digital Plus |
Object-Based Audio Support | Dolby Atmos, DTS:X |
Video | |
Upscaling | Yes, from 1080p to near-4K |
Pass-Through | 4K |
Deep Colour / x.v. Colour Support | Yes/Yes |
Tuner Section | |
FM Frequency Range | 87.5 to 107.9 MHz |
AM Frequency Range | 530 to 1710 kHz |
AM/FM Presets | 40 |
Connectivity | |
Bluetooth | Yes |
Wi-Fi | Yes, IEEE 802.11 a/b/g/n 5 GHz / 2.4 GHz |
AirPlay | Yes |
Inputs | 8 x HDMI (1 front) 3 x Optical TOSLINK 2 x Digital coaxial 2 x Component video 2 x Composite video 7 x Stereo RCA audio (1 phono) 1 x USB (rear) |
Outputs | 2 x HDMI (1 ARC-compatible, 1 Zone 2) 1 x Component video 1 x Zone 2 stereo pre-out 1 x Zone 3 stereo pre-out 1 x 11.2-channel pre-out 1 x 1/4" (6.35 mm) headphone (front) |
Other Ports | 1 x Setup microphone input (front) 1 x FM tuner antenna 1 x AM tuner antenna 1 x Ethernet 1 x AC power cord 1 x IR remote in 1 x RS-232C 1 x Trigger out (12 VDC, 150 mA max) |
Speaker Connectors | 11 x Binding post pairs |
HDMI CEC | Yes |
Audio Return Channel (ARC) | Yes, on main HDMI output |
HDCP Compliance | HDCP 2.2 on inputs 1 to 5 |
3D Support | Yes |
Input Sensitivity and Impedance | 200 mV / 82 kOhms (line) 3.5 mV / 47 kOhms (phono MM) |
Output Level and Impedance | Component Y, Composite Video: 1.0 V p-p/75 Ohms Component PB/CB, PR/CR: 0.7 V p-p/75 Ohms |
Component Video Frequency Response | 5 Hz to 100 MHz, +0 dB, -3 dB |
RCA Output Level and Impedance | Pre-Out: 1.0 V/330 Ohms Subwoofer Pre-Out: 1.0 V/330 Ohms Zone Out: 200 mV/1.2 kOhms Zone Pre-Out: 2.0 V/1.2 kOhms |
Phono Overload | 70 mV (MM, 1 kHz, 0.5%) |
Tone Control | Bass: ±10 dB, 100 Hz Treble: ±10 dB, 10 kHz |
General | |
On-Screen Display | Yes |
Power Requirements | 230 VAC, 50 Hz |
Power Consumption | Operational: 320 W Standby: 0.15 W |
Dimensions (W x H x D) | 435 x 201 x 453 mm |
Weight | 19.5 kg |
Reviews
(no ratings yet)Give it a quick rating:
Thanks for your rating!
Write a review
Details
- Product: Onkyo TX-RZ1100 9.2-Channel Network A/V Receiver
- Manufacturer: Onkyo
- Model: TX-RZ1100
- SKU: TX-RZ1100
- RM Product #: 47361
- Warranty: 1 year manufacturer warranty