920 / 500 / 180 / 70 / 1 Lumen, CREE XM-L2 U2 LED, Secondary Red LED


Need more information about this product? - We'll get back to you ASAP
You must enter a valid email address.
Email me when stock arrives
North Island
$3.72
South Island
$3.72

Note: Product does not include batteries

The white CREE XM-L2 U2 LED housed in the NITECORE MT10A Flashlight outputs up to 920 lumens on turbo mode. A secondary red LED emitter provides light that doesn't alter night-adjusted vision, and can function as a location beacon when placed in strobe mode. On and off switching is accomplished via the tail switch while output levels and access to strobe and SOS modes are controlled by the dual body switches. The tail switch also allows for constant on or momentary illumination.

The flashlight's aluminium body has a Mil Spec Type III hard-anodised finish with a 1" diameter bezel. Deep pocket carry is accomplished by use of a removable clip, and a protrusion on the rear protects the switch and functions as a tail stand. An orange peel reflector provides a smooth beam, and the body has a non-slip design. Waterproof to 6.6' and impact resistant to 4.9', the M10A is ideal for harsh conditions. This light is powered by one AA or one 14500 battery. This light includes a holster,clip, lanyard, spare tailcap cover and a spare O-ring.

Key Features

Light Performance
  • IMR14500
    • Turbo: 920 lumens
    • High: 500 lumens
    • Mid: 180 lumens
    • Low: 70 lumens
    • Min: 1 lumen
  • AA:
    • Turbo: 170 lumens
    • High: 95 lumens
    • Mid: 48 lumens
    • Low: 17 lumens
    • Min: 1 lumen
  • White Cree XM-L2 U2 LED
  • Red LED
  • Red location beacon
  • SOS signal mode
  • Strobe mode
  • Orange peel reflector
Switching
  • Location: body and tailcap
  • Type: push button
  • Momentary and constant on activation
  • Tail switch controls on and off functions
  • Dual body switch controls modes and intensity
  • Body switch controls output, mode, and secondary LED
  • Press and hold both buttons to lock and unlock the flashlight
  • Switch blinks to indicate power level
  • Switch blinks once every two seconds to help locate light in the dark
Construction Details
  • 1" diameter bezel
  • Aluminium alloy housing
  • Mil Spec Type III hard-anodised finish
  • Textured body for anti-slip grip
  • Ventilation slots
  • IPX8 rated: waterproof to 6.6'
  • Impact resistant to 4.9'
  • Scratch and impact resistant tempered glass lens
  • Reverse polarity protection
  • Removable clip
  • Tail stand

Specifications

Illumination SourceCREE XM-L2 U2
Red LED
Output RangeIMR14500:Turbo: 920 lumens
High: 500 lumens
Mid: 180 lumens
Low: 70 lumens
Min: 1 lumen
AA:
Turbo: 170 lumens
High: 95 lumens
Mid: 48 lumens
Low: 17 lumens
Min: 1 lumen
Battery1 x AA or 1 x 14500
RuntimeIMR14500:Turbo: 0.5 h
High: 0.75 h
Mid: 1.75 h
Low: 5 h
Lower: 100 h
AA:
Turbo: 2.75 h
High: 3.5 h
Mid: 7.15 h
Low: 20 h
Min: 102 h
ConstructionAluminium alloy
FinishMil Spec Type III hard anodised
WaterproofingIPX8
Submersible to 6.6' / 2 m
Impact Resistance4.9' / 1.5 m
Length4.2" / 107.9 mm
DiameterHead: 1" / 25.4 mm
Tail: 0.8" / 21.2 mm
Weight60.7 g without battery
Product:
NITECORE MT10A Flashlight
Manufacturer:
Nitecore
Model:
MT10A
SKU:
MT10A
RM Product #:
31314