Fenix Flashlight PD35-TAC LED Flashlight (Tactical Edition)
Product #33804
SKU PD35-TAC-BK
In stock with supplier Usually ships in 1 - 2 weeks


Fenix Flashlight PD35-TAC LED Flashlight (Tactical Edition)

Product #33804 | SKU PD35-TAC-BK
In stock with supplier Usually ships in 1 - 2 weeks

Product Features
  • 8 / 60 / 200 / 500 / 1000 Lumens
  • Cree XP-L (V5) White LED
  • Tactical and Outdoor Function Modes
  • Emergency Strobe Mode
  • Pushbutton Body & Tailcap Switches


Need more information about this product? - We'll get back to you ASAP
You must enter a valid email address.
Email me when stock arrives
North Island
$3.72
South Island
$3.72

This version of Fenix 's PD35, the PD35-TAC LED Flashlight, features two selectable operation modes for general purpose and tactical uses. In the Outdoor mode, the tailcap switch controls basic on/off with the five output intensities and strobe being selectable via the side body switch. When the light is set to Tactical mode, the switching and available outputs change for easier use. This easier switching and tactical-minded outputs makes operating the light and choosing outputs more intuitive which is critical in high-stress situations. In Tactical mode, switching and output selection is done using the tailcap pushbutton, with access to just the turbo, strobe, and low outputs for simplicity.

Utilising a Cree XP-L (V5) LED, this versatile light produces an output range from a low task-orientated 8-lumens up to a powerful 1000 lumen turbo mode that is ideal for searching or lighting large areas and rooms. Its 1000 lumen strobe mode can be used to disorientate or signal in emergency situations. The light runs on a single user-supplied 18650 or two CR123 batteries, and features active and passive over-heat protection, digitally regulated output, and reverse-polarity protection.

Complementing the light's performance is a lightweight and durable aluminium allow body with a protective corrosion and scratch-resistant type III hard anodised finish. The light is impact-resistant tested to 1.0 m drops, and IPX8-rated to be submersible to a depth of up to 2.0 m. A textured body profile provides a sure grip in cold and wet conditions, and anti-roll areas are machined into the bezel and tailcap. The belt clip is removable for carrying the light in a holster or pocket without getting caught or snagged.

Key Features

Light Performance

  • Min: 8 lumen
  • Low: 60 lumen
  • Moed: 200 lumen
  • High: 500 lumen
  • Turbo: 1000 lumen
  • Cree XP-L (V5) white LED
  • 1000-lumen strobe mode: Use to disorientate or to signal in emergencies

Switching

  • Type: Pushbutton
  • Location: Tailcap and body
  • Momentary and constant-On modes
  • Tactical tailcap switch for on/off. Press for momentary activation, click for constant-on
  • Body switch controls output and mode selection
  • Intelligent last-mode memory switch

Output Modes

  • Selectable Outdoor and Tactical modes
  • Each mode has different output and switch functionality availability
  • Tactical:
    • Simplified switching for high-stress situations
    • Press or click tailcap for momentary or constant-on modes
    • Three available outputs: Turbo - Strobe - Low
    • Defaults to Turbo mode as first output
    • Output selection via tailcap switch only
    • Last-mode-memory does not work in Tactical mode
  • Outdoor:
    • Press or click tailcap for momentary or constant-on modes
    • With light on, cycle through outputs using body switch
    • Access strobe via body switch
    • Last-mode-memory function works in this mode

Construction Details

  • Lightweight and durable aluminium alloy body
  • Scratch and corrosion-resistant type III black anodised finish
  • Anti-reflection coated tempered glass emitter window
  • Anti-roll and slip-resistant body design
  • IPX8-rated, submersible to 2.0 m
  • Impact resistance tested to 1.0 m
  • Head tip has five-point crenellations allowing light to shine through when placed head down
  • Heat-dissipating fins on head help to prevent overheating
  • Removable belt clip

Electronics

  • Runs on one user-supplied 18650 rechargeable or two CR123A lithium batteries
  • Digitally regulated output maintains consistent beam intensity throughout battery charge
  • Over-heat protection circuitry automatically steps-down the output to prevent damage due to excessive heat
  • Reverse polarity protection prevents damage to light if batteries are installed incorrectly
  • Low-voltage indicator when using rechargeable batteries
Illumination SourceCree XP-L (V5) LED
Output RangeMin: 8 lumen
Low: 60 lumen
Moed: 200 lumen
High: 500 lumen
Turbo: 1000 lumen
Strobe: 1000 lumen
Battery Type1 x 18650
2 x CR123A
RuntimeMin: 140.0 hr
Low: 29.25 hr
Moed: 8.5 hr
High: 2.9 hr
Turbo: 1.2 hr
ConstructionAluminium alloy
WaterproofingIPX8-rated, submersible to 2.0 m
Impact Resistance1.0 m
Dimensions5.4 x 1.0" / 13.7 x 2.5 cm
Weight89.0 g, without battery

In The Box

  • Fenix Flashlight PD35-TAC LED Flashlight (Tactical Edition)
  • Lanyard
  • Holster
  • Pocket Clip
  • 2 x Spare O-Ring
  • Spare Tailcap Switch Boot

Reviews

Own or use this product?
Give it a rating

In The Box

  • Fenix Flashlight PD35-TAC LED Flashlight (Tactical Edition)
  • Lanyard
  • Holster
  • Pocket Clip
  • 2 x Spare O-Ring
  • Spare Tailcap Switch Boot

Reviews

Own or use this product?
Give it a rating
Product:
Fenix Flashlight PD35-TAC LED Flashlight (Tactical Edition)
Manufacturer:
Fenix
Model:
PD35-TAC-BK
SKU:
PD35-TAC-BK
RM Product #:
33804