Panasonic AK-UCU600EJ Control Unit (Tajimi Connector) has been discontinued, here are some related products you might like:
Panasonic AK-UCU600EJ Control Unit (Tajimi Connector)
Features
- Camera Control Unit/Base Station
- Tajimi Connector
Description
Panasonic AK-UCU600EJ Control Unit (Tajimi Connector)
The Panasonic AK-UCU600PJ CCU supports not only UHD and HD simultaneous output, but also enables high-speed output up to 240p in HD mode to be performed simultaneously with standard (1x) output, while still having a compact size.
With the AK-UCU600 Camera Control Unit (CCU), uncompressed long distance transmission of 4K/HD video signals via optical fibre is supported. The AK-HRP1000GJ/1005GJ Remote Operation Panels (ROP) are equipped with a colour LCD display that provides excellent visibility and functions for quick response. This system achieves high-quality video and excellent operability.
In cases where power is supplied by the CCU, it is possible to transmit at a long distance of up to approx. 2,000 m between the camera and the CCU. The distance can be extended up to 10,000m by providing a local power supply at the camera head and using general-purpose single mode optical fibre. Between the CCU and the ROP, in addition to a dedicated serial line, IP connection via LAN cable is also supported.
Key Features:
- Contains a dual UHD 12G-SDI system, and supports 3G-SDI quad link with quadrant or two-sample interleave.
- Optical fibre transmission of uncompressed video signals over a distance of approx. 2,000 m between camera and CCU.
- The compact, lightweight unit measures 2U in height and is rack-mountable.
- Supports IP streaming (100 Base-T)
- SD memory card can be used for saving user files and updating firmware versions
- Dual uncompressed12G-SDI output.
- Supports TICO over SDI (4K over 3G-SDI) output (4K signal can be transferred by a conventional 3G-SDI cable)
- Supports 1080p/i and 720p. In addition to standard output, high-speed output at 2x, 3x or 4x can be selected according to the specifications of the server.
- Supports HDR/SDR simultaneous output and HDR BT.2020/BT.709 simultaneous output.
- 12G-SDI output and TICO over SDI (4K over 3G-SDI) output are compatible with the AK-UC3000
Specifications
Power Supply | 100 V - 240 V AC, 50 Hz/60 Hz |
Power Consumption | 500 W (Without camera connected: 90 W) |
Capacity for Supplying Power to a Camera | 240 V AC (tolerance: 5%), 1.46 A , 50 Hz/60 Hz |
Operating Temperature | 0°C to 40°C (32°F to 104°F) |
Humidity | 10% to 90% (no condensation) |
Weight | Approx. 8.8 kg (19.4 lb) |
Dimensions (W x H x D) | 424 mm x 88 mm x 401 mm (16-5/8 inches x 3-7/16 inches x 15-13/16 inches) (excluding protrusions) |
Video Output | 3G/HD/SD-SDI: 7 lines (embedded audio is supported only for HD signals) HD/SD-SDI: 1 line (shared with picture monitor output; embedded audio is supported only for HD signals)" |
HD TRUNK/TICO Output | HD-SDI: 1 line (HD TRUNK output) 3G/HD-SDI: 1 line (TICO output) |
Return Input | 3G-HD/HD/SD-SDI: 4 lines (RET1 input has active-through output) Analog composite: 1 line |
Prompter Input | HD-SDI: 1 line (with active-through output) Analog composite: 2 lines (through output of 1 and input of 2 share the connector ) It is not terminated when the unit is turned OFF. No through output. |
Reference Input | BB (black burst) / tri-level: 1 line (automatic termination, connect to upper connector; BB signal and tri-level signal automatically recognized, with loop-through output) |
Microphone Output | 0 dBm/600 Ω, 2 lines (XLR, 3-pin, male) |
Communication | Intercom input/output (ENG / PROD, 0 dBm, 600 Ω (4 W) / 1 V [p-p], 200 Ω (RTS), 4 W / RTS / CLRCOM) : 2 lines PGM input (0 dBm/600 Ω) : 2 lines Tally input (red, green, yellow) : 1 input each |
AUX | WFM control 6-bit (open collector output, terminal shared with camera microphone gain setting) Camera microphone gain setting input 5-bit (photo-coupler input, terminal shared with WFM control ) Down-conversion system setting input 2-bit (photo-coupler input) |
TRUNK | RS-422 / RS-232C 2 lines |
FRONT ROP | RS-422 1 line, 16 V DC output (only one of this and REAR ROP can be selected at one time via the menu or the [ROP FRONT/ REAR] selection switch on the front panel) |
REAR ROP | RS-422 1 line, 16 V DC output (only one of this and FRONT ROP can be selected at one time via the menu or the [ROP FRONT/REAR] selection switch on the front panel) |
MSU | RS-422 1 line, GPI for control |
LAN TRUNK | LAN connection with camera side via an optical cable 1 line, 100BASE-T, 1000BASE-T |
LAN | Personal computer connection for distribution via the Web 1 line, 10BASE-T, 100BASE-TX (use a crossover cable when connecting directly with a personal computer) |
Reviews
(no ratings yet)Give it a quick rating:
Thanks for your rating!
Write a review
Details
- Product: Panasonic AK-UCU600EJ Control Unit (Tajimi Connector)
- Manufacturer: Panasonic
- Model: AK-UCU600EJ
- SKU: AK-UCU600EJ
- RM Product #: 95230
- Warranty: All Lumix and Panasonic Camcorder products come with a 3 year warranty