Panasonic Camera Control Unit (Tajimi Connector) has been discontinued, here are some related products you might like:
Panasonic Camera Control Unit (Tajimi Connector)
This product is no longer available
Features
- Camera Control Unit/Base Station
- Tajimi Connector
Description
Panasonic Camera Control Unit (Tajimi Connector)
The CCU Supports both 4K and HD Formats by just Changing the Camera Head. It Enables a High-quality, Long-distance Optical Fiber Transmission Camera System to be Configured at a Reduced Cost.
Key Features:
- Optical fiber transmission of uncompressed video signals over a distance of approx. 2,000 m between camera and CCU*.
- The compact, lightweight unit measures 2U in height and is rack-mountable.
- Supports IP streaming (100 Base-T).
- An SD memory card can be used for saving user files and updating firmware versions.
*When power is supplied from CCU.
Specifications
| General | |
| Power Supply | 100 V - 240 V AC, 50 Hz/60 Hz |
| Power Consumption | 500 W (Without camera connected: 70 W) |
| Capacity for Supplying Power to a Camera | 240 V AC (tolerance: 5%), 1.46 A , 50 Hz/60 Hz |
| Operating Temperature | 0 ℃ to 40 ℃ (32 °F to 104 °F) |
| Humidity | 10 % to 90 % (no condensation) |
| Weight | Approx. 8.8 kg (19.4 lb) |
| Dimensions (W x H x D) | 424 mm x 88 mm x 401 mm (16-5/8 inches x 3-7/16 inches x 15-13/16 inches) (excluding protrusions) |
| Video Output | |
| 3G/HD/SD-SDI | 7 lines (embedded audio is supported only for HD signals) |
| HD/SD-SDI | 1 line (shared with picture monitor output; embedded audio is supported only for HD signals) |
| Analog composite | 2 lines (1 line shared with picture monitor output) |
| HD TRUNK Output | |
| HD-SDI | 1 line (cannot be used in UHD/HS mode) |
| Return Input | |
| 3G-HD/HD/SD-SDI | 4 lines (RET1 input has active-through output) |
| Analog composite | 1 lines |
| Prompter Input | |
| HD-SDI | 1 line (with active-through output) |
| Analog composite | 2 lines (through output of 1 and input of 2 share the connector)It is not terminated when the unit is turned OFF. No through output |
| Reference Input | BB (black burst) / tri-level: 1 line(automatic termination, connect to upper connector; BB signal and tri-level signal automatically recognized, with loop-through output) |
| Microphone Output | 0 dBm/600 Ω, 2 lines (XLR, 3-pin, male) |
| Communication | ntercom input/output (ENG / PROD, 0 dBm, 600 Ω (4 W) / 1 V [p-p], 200 Ω (RTS), 4 W / RTS / CLRCOM): 2 lines PGM input (0 dBm/600 Ω) : 2 linesTally input (red, green, yellow) : 1 input each |
| AUX | WFM control6-bit (open collector output, terminal shared with camera microphone gain setting)Camera microphone gain setting input5-bit (photo-coupler input, terminal shared with WFM control)Down-conversion system setting input 2-bit (photo-coupler input) |
| TRUNK | RS-422 / RS-232C2 lines |
| FRONT ROP | RS-4221 line, 16 V DC output (only one of this and REAR ROP can be selected at one time via the menuor the [ROP FRONT/REAR] selection switch on the front panel) |
| REAR ROP | RS-4221 line, 16 V DC output (only one of this and FRONT ROP can be selected at one time via the menuor the [ROP FRONT/REAR] selection switch on the front panel) |
| MSU | RS-4221 line, GPI for control |
| LAN TRUNK | LAN connection with camera side via an optical cable1 line, 100BASE-T, 1000BASE-T |
| LAN | Personal computer connection for distribution via the Web1 line, 10BASE-T, 100BASE-TX (use a crossover cable when connecting directly with a personal computer) |
Reviews
(no ratings yet)
Own or use this product?
Give it a quick rating:
Thanks for your rating!
Share your thoughts with other customers:Give it a quick rating:
Thanks for your rating!
Write a review
Details
- Product: Panasonic Camera Control Unit (Tajimi Connector)
- Manufacturer: Panasonic
- Model: AK-UCU500EJ
- SKU: AK-UCU500EJ
- RM Product #: 95259
- Warranty: All Lumix and Panasonic Camcorder products come with a 3 year warranty
Recently Viewed
View AllPanasonic Camera Control Unit (Tajimi Connector)
Loading...
