Mounting Hardware

Kupo KS-054 3/8"-16 Male to 1/4"-20 Male Thread Adapter

Male 1/4"-20 to male 3/8"-16 adapter
In stock Ships today
$7.95
You Pay: $4.00
- +

9.SOLUTIONS Python Double Clamp

  • Load Capacity: 20 kg
  • Jaws Open from 0 to 50 mm
  • Two clamps
  • Dual contoured jaws
In stock Ships today
$109.00
You Pay: $98.00
- +

Kupo KCP-930P 3-Way Clamp for 1.0-1.4"(25-35 mm) Tube

Mounts Around Tubing Sized 1.0-1.4", Three Recessed Mounting Points
In stock Ships today
$55.95
You Pay: $34.00
- +

Kupo KCP-101 Max Arm

Adjustable Aluminum Arm, Two Studs Attached to Ball Joints
In stock Ships today
$169.00
You Pay: $101.00
- +

Manfrotto 035 Super Clamp without Stud

  • Lightweight cast alloy
  • Holds just about anything
  • Mount on any tube 13 - 55 mm
  • Jaw Opening of 1.3 - 5.3  cm
  • Stud not included
In stock Ships today
You Pay: $55.95
- +

9.SOLUTIONS Python Clamp

Load Capacity: 20kg, Jaws Open from 0 to 50mm
In stock Ships today
$53.95
You Pay: $45.00
- +

Manfrotto 147 Adapter Spigot 3/8" + 1/4"

A brass spigot with a 3/8 inch and a 1/4 inch screw.
In stock Ships today
$9.95
You Pay: $8.95
- +

9.SOLUTIONS Python Clamp Mini

  • Load Capacity: 5 kg
  • Jaws Open from 8 - 35 mm
  • Position anywhere
In stock Ships today
$51.95
You Pay: $48.00
- +

9.SOLUTIONS Python Clamp with Grip Joint

  • Load Capacity: 20 kg
  • Clamping Range: 0 to 50 mm
  • Tightening Knob
  • Grip Joint with 3/8" & 5/8" Receptacles
  • 3/8"-16 (M10) Connection
In stock Ships today
$80.95
You Pay: $76.00
- +

9.SOLUTIONS Python Clamp with Snap-In Socket

  • Load Capacity: 20 kg
  • Clamping Range: 0 to 50 mm
  • Tightening Knob
  • 5/8" Receiver
  • 3/8"-16 (M10) Connection
In stock Ships today
$99.95
You Pay: $90.00
- +

Kupo KCP-200B 2-1/2" Grip Head With Big Handle (Black Powder-Coated Finish)

Aluminum & Steel, Four V-Shaped Jaws, Handle With Roller Bearings
In stock Ships today
You Pay: $54.95
- +

9.SOLUTIONS Python Clamp with 3/8" Male Thread

Load Capacity: 20kg, Jaws Open from 0 to 50mm
In stock Ships today
$69.95
You Pay: $59.00
- +

Manfrotto 013 Adapter Spigot

A double ended spigot with 1/4 inch and 3/8 inch male threads.
In stock Ships today
You Pay: $19.95
- +

SmallRig 859 Big Double Head Stud with 1/4" to 1/4" thread

Available to order today
In stock Ships today
You Pay: $6.95
- +

K&M 216 Thread Adapter 5/8" 27 Gauge Female Thread to 3/8" Male Thread

For Microphone Mounts and Stands
In stock Ships today
You Pay: $8.95
- +

9.SOLUTIONS Python Clamp with 5/8" Pin

  • Load Capacity: 20 kg
  • Clamping Range: 0 to 50 mm
  • Tightening Knob
  • 5/8" Pin
  • 3/8"-16 (M10) Connection
In stock Ships today
$70.95
You Pay: $65.00
- +

Impact Double Ended Spigot with 1/4"-20 and 3/8" Male Threads

Features both 1/4"-20 and 3/8" male thread sizes
In stock Ships today
You Pay: $22.95
- +

Manfrotto 015 Adapter

Reduces a 3/8 inch threaded screw to a standard 1/4 inch tip.
In stock Ships today
You Pay: $10.95
- +

Manfrotto 037 Reversible Short Stud, with 3/8" & 1/4"-20 Threads (Brass)

  • For Super Clamp System
  • Replaces #2907
In stock Ships today
You Pay: $13.95
- +

Kupo KCP-450 4-1/2" Grip Head With 1-1/8" Stud and Receiver

Supports 5/8"(16 mm) and 3/8" Accessories, Holds Large Overhead Frames
In stock Ships today
$129.00
You Pay: $76.00
- +

9.SOLUTIONS Mini Rigging Rod Set Nuts

  • 2x Long Nuts
  • 6x Finger Nuts
  • 3/8" Thread
In stock Ships today
$31.95
You Pay: $26.00
- +

Manfrotto 035C Super Clamp without Stud (Ratchet version)

  • Securely mounted on any tube from 13 to 45 mm
  • Equipped with ratchet handle
  • Universal 1/4'' thread attachment
  • Attachment is 5/8'' hexagonal socket
In stock Ships today
You Pay: $60.95
- +

SmallRig 1027 Thread Adapter with female 3/8" to male 1/4" thread

Comes with female 3/8" to male 1/4" thread --Includes 2pcs--
In stock Ships today
You Pay: $13.95
- +

SmallRig 856 Thread adapter w/ 1/4" to 3/8" thread 10pcs Pack

Available to order today
In stock Ships today
You Pay: $11.95
- +

9.SOLUTIONS Baby Pins

Increase mounting utility to anything with a 3/8" thread
In stock Ships today
You Pay: $46.95
- +

9.SOLUTIONS Savior Clamp

  • Load Capacity: 30 kg
  • Weighs 0.44 kg
  • 60 mm Jaw Opening
  • Accommodate odd shapes
In stock Ships today
You Pay: $94.95
- +

Kupo KS-084 Quick Release Adapter (1/4"-20)

1/4"-20 Male to Male Adapter, Spring-Loaded Ball Bearing Mechanism
In stock Ships today
$31.95
You Pay: $19.00
- +

Kupo KS-048 Junior 3"(7.62cm) Wall Plate, Junior 1-1/8" Receiver

Eight Anchor Points, Metal Locking Knob, Chrome-Plated Steel Finish
In stock Ships today
$44.95
You Pay: $27.00
- +

Kupo KSC-22 Double Suction Cup

Temporary Mounting Solution, For Smooth Nonporous Surfaces
In stock Ships today
You Pay: $239.00
- +

Manfrotto 014-14 Rapid Adapter

Allows mounting of equipment with a 1/4 inch threaded receptor.
In stock Ships today
You Pay: $23.95
- +

Manfrotto MF125 Adapter Spigot 3/8"+ 3/8"

  • 3/8" + 3/8" Brass Spigot
In stock Ships today
You Pay: $9.95
- +

Kupo KS-051 1/4"-20 Male to 1/4"-20 Male Thread Adapter

Turns Female 1/4"-20 to Male 1/4"-20
In stock Ships today
You Pay: $7.95
- +

SmallRig 828 Double Head Stud with 1/4" to 1/4" thread

Available to order today
In stock Ships today
You Pay: $9.95
- +

Impact Super Clamp with Ratchet Handle

Versatile grip tool made of lightweight cast alloy
In stock Ships today
You Pay: $56.95
- +

Manfrotto 026 Swivel Adapter

An adapter with the ability to rotate - supports up to 2.5kg
Estimated stock due 19th of July
You Pay: $64.95
- +

Manfrotto 175 Spring Clamp

A multi-purpose clamp that can grip 40mm to 5mm
In stock Ships today
You Pay: $37.95
- +

SmallRig 2161 Multi-Functional Crab-Shaped Clamp with Ballhead Arm

Ballhead arm with Multi-Use Clamp for accessories up to 54mm in diameter
In stock Ships today
You Pay: $22.95
- +

Impact Female 1/4"-20 to Male 3/8" Thread Adapter

Brass female to male thread adapter
In stock Ships today
You Pay: $10.95
- +

SmallRig 1069 Thread Adapter with female 1/4" to male 3/8" thread

Standard female 1/4"-20 to male 3/8"-16 thread
In stock Ships today
You Pay: $15.95
- +

Kupo KS-046 Baby 3"(7.62m) Wall Plate, Baby 5/8"(16mm) Stud

Eight Anchor Points, Chrome-Plated Steel Finish
In stock Ships today
You Pay: $36.95
- +

Phottix Multi Clamp

Attaches to any circular bar or pole.
In stock Ships today
You Pay: $51.95
- +

SmallRig 2220 Super Clamp

The jaw is fitted with rubber pads on the inside removing the wear and tear of the rod it clamps on. The clamp can open 10 to 55 mm.
In stock Ships today
You Pay: $53.95
- +

Manfrotto 036-38 Lighting Stud

Features a 3/8 inch screw - ideal when mounting cameras directly
In stock Ships today
You Pay: $13.95
- +

CHAUVET CLP-03 Light-Duty C-Clamp for 1-2" Truss (20Kg Capacity)

Adjustable Knob for Tight Fit, 20Kg Capacity
In stock Ships today
You Pay: $10.95
- +

Kupo KS-022 Baby 5/8"(16mm) Grip Arm Pin

5.0"(12.7cm) Long, Steel Construction
In stock Ships today
You Pay: $14.95
- +

SmallRig 1262 Double Head Converter Screw Pack

Available to order today
In stock Ships today
You Pay: $17.95
- +

Manfrotto 118 Spigot with Double Male Thread

A 16mm spigot with double male thread 1/4 inch and 3/8 inch.
In stock Ships today
You Pay: $11.95
- +

9.SOLUTIONS Savior Spring Clamp

  • Load Capacity: 10 kg
  • Weighs 320 g
  • Wide jaws
  • Strong torsion spring
  • Support irregularly shaped objects
In stock Ships today
You Pay: $67.95
- +

SmallRig Double Head Converter Screw Pack 1581

Available to order today
In stock Ships today
You Pay: $12.95
- +

Manfrotto 119 Adapter Spigot

Features a double female thread with a 1/4 inch and a 3/8 inch thread.
In stock Ships today
You Pay: $10.95
- +

1 2 3 4 5 Next >