Tiffen 52mm XLE Series apeX Hot Mirror IRND 3.0 Filter has been discontinued, here are some related products you might like:
The Tiffen 52mm XLE Series apeX Hot Mirror IRND 3.0 Filter is a combination of both a hot mirror infrared control filter and a 3.0 neutral density filter. A hot mirror IRND is ideal for HD cameras, which have greater low-light sensitivity and, subsequently, an increased susceptibility to IR contamination. When using a standard neutral density filter to counter the increased light sensitivity afforded by the HD sensor, the effects of infrared pollution become more apparent. This filter combines an ND filter with a comparable IR control filter to eliminate the spill of infrared light reaching the sensor while still maintaining the extra exposure benefits of a neutral density filter. The hot mirror filtration incorporates a dielectric mirror in order to combat the effects of both near and far infrared regions of the spectrum.
This filter is constructed using ColorCore technology, a process that involves laminating the filter substrate between 2 pieces of optical glass and grinding flat to a tolerance of 1/10,000th of an inch.
- Infrared control filter helps to block infrared pollution from affecting the colour fidelity of imagery; this enables a wider colour gamut and truer colours, especially noticeable in the darker regions of the image.
- 3.0 neutral density filter provides a 10 stop exposure reduction.
- Ideal for use with HD cameras without an integrated infrared-blocking filter.
- Hot mirror filter blocks infrared pollution from both near and far regions of the spectrum while allowing all visible light to pass.
|Type||Hot mirror infrared control / neutral density|
|Filter Factor||3.0 (10 stop)|
|Effect||Helps to balance HD camera's increased low-light sensitivity and susceptibility to red light/IR pollution|
Cuts IR at 1180 nm (nanometres)
|Front Filter Thread Size||52 mm|
|Front Lens Cap Size||52 mm|