Product Features
  • 2.4 GHz Reduced Interference Frequency
  • Range Up to 100m
  • Individual/Group Wireless Flash Trigger
  • Up to 3 Light Groups/7 Grp Combinations
  • Flash Sync Speed of Up to 1/320s


Need more information about this product? - We'll get back to you ASAP
You must enter a valid email address.
Email me when stock arrives
North Island
$3.72
South Island
$3.72

The FreeWave Fusion Wireless Flash Trigger & Remote Control from Vello is a versatile, reliable remote control kit that will trigger off-camera flash units and studio lights from up to 100 m away. It can be used to configure up to three different light groups, which can be triggered individually or simultaneously, for a total of seven different combinations, using its multiple groups feature. Simultaneous triggering of multiple light groups requires additional FreeWave Fusion Receivers (available separately).

The FreeWave Fusion also provides the convenience of a wireless camera shutter release, ideal for photographing wildlife, and also for macro and close-up photos or long exposures, where the slightest camera movement can ruin a picture. Working on the 2.4 GHz frequency gives you reduced radio interference and an extended range (up to 100m)—you don't need to have line-of-sight alignment, either, as radio waves will pass through walls, windows and floors.

Key Features

2.4GHz Radio Frequency
Reduced interference and improved wireless signal quality.

Extended Range
Range of up to 100m

Multi-Purpose
Use as an individual or group wireless flash trigger, and/or as a shutter release remote trigger.

Multiple Groups
Configure up to three different light groups and up to seven different group combinations.

Flash Sync Speed of Up to 1/320s
Take advantage of sync speeds that match the rating of your camera all the way up to 1/320s (on compatible cameras only).

Flash Wake-Up
Simply depress the trigger button on the transmitter half-way to pull the flash out of "sleep-mode". Sleep mode allows the flash to power down in between shooting sessions to extend battery life. The wake-up function is only available when used as part of a complete Canon TTL system.

Note: If your flash does not have a wake-up function, you may be able to turn off sleep mode. Refer to your flash's manual for instructions.

Versatile
One receiver works with multiple camera and light models. Just swap out the connecting cables.

Dual-Function Shutter Release Button
Press halfway to focus; press fully to trigger shutter.

LED Indicators
Confirm pre-focus, shutter release, flash wake-up, and flash trigger in wireless mode.

Included Shutter Release Cables Support:
Canon EOS: Elan series, Digital Rebel (300D), XT (350D), XTi (400D), XSi (450D), T1i (500D), T2i (550D), T3 (1100D), T3i (600D), T4i (650D), T5 (1200D), T5i (700D), T6i (750D), T6s (760D), SL1 (100D) and XS (1000D), 60D & 70D 10D, 20D, 30D, 40D, 50D, 5D, 5D Mark II, 5D Mark III, 6D, 7D, 7D Mark II, 1D, 1D Mark II, 1D Mark II N, 1D Mark III, 1D Mark IV, 1Ds, 1Ds Mark II, 1Ds Mark III, 1D X and 1D C PowerShot G10, G11, G12, G15, G16 & G1 X; SX50, SX60

Contax: N and 645

Hasselblad: H series

Pentax: K10D, K20D, K100D, K110D, K200D, K-3, K-5, K-5 II, K-7, K30, K-50, K-500, *istDS, DS2, DS, DL2, DL, and D

Samsung: NX10 & NX100; GX-1S, GX-1L, GX-10 & GX-20

Sigma: SD1, SD9, SD10, SD14 & SD15* Optional shutter release cables are available to make the remote control function compatible with other brand camera models

Frequency2.4 GHz
Range100 m with no obstructions
Confirmation LEDs2 Colour
Shutter ModesSettings controlled by camera: Single Shot, Continuous, Self-Timer, & Bulb
Sync Type2.5mm Sub-Mini
Power SupplyTransmitter: 1x CR-2032
Receiver: 2x AAA
Battery LifeTransmitter: 3 Years
Receiver: 300 Hours
Product:
Vello FreeWave Fusion Wireless Flash Trigger & Remote Control for Canon SLR
Manufacturer:
Vello
Model:
RFW-C
SKU:
RFW-C
RM Product #:
33075