Nikon ML-3 Modulite Remote Control Set
Enables remote control up to 8m via an infrared ray
The Nikon ML-3 (10 Pins System) Modulite Remote Control Set is for use with Nikon cameras: N90, N90S, F100, F5, F6, D1, D2 & D3 Series, D100 with MB-D100, D200, D300, D700 battery packs. It enables remote control for two separate channels via an infrared LED beam, providing automatic camera operation from a distance of up to about 26-feet (8 m). Auto triggering, delayed shutter release, single and continuous shooting are possible. It can also fire the camera remotely when a subject moves between the transmitter and receiver, for surveillance or wildlife photography.
- Enables remote control up to 8m (26.2 ft.) via an infrared ray
- Can also fire the camera remotely when a subject moves between the transmitter and receiver, for surveillance or wildlife photography
- Wireless Remote Shutter Release
- Minimizes Vibrations
- Good for Close-ups & Time Exposures
The ML-3 is designed so the transmission button operates the same way as the shutter release button of the camera. Lightly pressing on the transmission button turns on the camera's exposure meter and starts autofocus detection.
To connect the ML-3, the receiver is inserted and locked into a camera's or Speedlight bracket's accessory or hot shoe and is then connected to the remote terminal on the camera with its remote cord. The camera is fired when the transmitter is pointed in the direction of the receiver's sensor and the transmit button is pushed. Recommended camera settings are: C or M focus modes, Programmed Auto (P/Ps), Aperture-Priority Auto or Shutter-Priority Auto, L or H film advance modes.
More information about Nikon Products: (Link to Nikon Website)
- Nikon ML-3 Modulite Remote Control Set
- RM Product #: