Studs, Receptors & Pins
You Pay:
$26.95
Wire Safety Bond - 900mm Loop End
Safety cable for mounting lights to a studio grid
Usually ships in 1 - 2 weeks
You Pay:
$18.95
9.SOLUTIONS Tilt Adapter
- Friction Lock Disc
- Load Capacity: 35 kg
- 5/8" Pin and Receiver
- Works Well with Optional VESA Mounts
Usually ships in 4 - 6 weeks
You Pay:
$109.00
9.SOLUTIONS Mini Rigging Rod Set Nuts
- 2x Long Nuts
- 6x Finger Nuts
- 3/8" Thread
Usually ships in 4 - 6 weeks
You Pay:
$45.95
9.SOLUTIONS Large Tube Mount
- Load Capacity: 20kg.
- Magnetic Quick Mount Receiver.
- Fits Round, Oval, and Square Tubes.
- Anti-Scratch Padding Tape.
Usually ships in 4 - 6 weeks
You Pay:
$83.95
9.SOLUTIONS Baby Pin Set
Increase mounting utility to anything with a 3/8" thread
In stock
Ships tomorrow
You Pay:
$52.95
amaran Baby Pin Adapter to 3/8"-16 Screw
- Compatible with amaran T2C/T4C
- For Use with C-Stand or Grip Arm
Usually ships in 4 - 6 weeks
You Pay:
$56.95
Avenger F1000 Pump Cup with Baby Swivel Pin
Rubber and Aluminum Alloy Construction, 5/8" Pin, Pneumatic Pump
Special Order
Contact us for an ETA
You Pay:
$219.00
Avenger D500LB 20" Extension Arm (Black)
Zinc-plated Steel and Aluminum Alloy Construction
In stock
Ships in 1 - 2 working days
You Pay:
$159.00
Avenger F831 Baby Female Swivel with Ball
Zinc-Plated Steel Construction, Double Baby Female Attachments
Special Order
Contact us for an ETA
You Pay:
$229.00
Avenger F830 Baby to Junior Swivel Pin
Zinc-Plated Steel Construction, 5/8" Receiver, 5/8" Pin
Special Order
Contact us for an ETA
You Pay:
$169.00
Avenger F810 Baby Plate with 5/8" Swivel Spigot
Chrome-plated Steel Construction, Large T-Handle, 5/8" Baby Pin
Special Order
Contact us for an ETA
You Pay:
$139.00
Avenger F800 3.0" Baby Wall Plate (Chrome-plated)
Chrome-plated Steel Construction, 5/8" Baby stud
Special Order
Contact us for an ETA
You Pay:
$45.95
Avenger F301 Baby Wall Plate (Chrome-plated)
Chrome Steel Construction, Baby 5/8" Locking Receiver, 3.5 x 6.0" Base
Special Order
Contact us for an ETA
You Pay:
$89.95
Avenger F300 Junior Wall Plate (Chrome-plated)
Chrome Steel Construction, 1-1/8" Female Receiver
Special Order
Contact us for an ETA
You Pay:
$109.00
Avenger E300 5/8" Stud with 1/4-20" Female Thread
Zinc-plated Steel Construction
Special Order
Contact us for an ETA
You Pay:
$22.95
Avenger E250 Long Double 5/8" Baby Pin
Zinc-plated Steel Construction
Special Order
Contact us for an ETA
You Pay:
$18.95
Avenger E200 Stand Adapter
Zinc-plated Steel Construction, Junior to Baby: 1 1/8" to 5/8"
In Stock
Usually ships in 2 - 3 working days
You Pay:
$82.95
Avenger D800KIT Grip Kit and Bag
Steel and Aluminium Alloy Construction, 40" Grip Arm, D200 Grip Head
Special Order
Contact us for an ETA
You Pay:
$369.00
Avenger D520LB 40" Extension Arm (Black)
Zinc-plated Steel and Aluminum Alloy Construction
In stock
Ships in 1 - 2 working days
You Pay:
$169.00
Avenger D520L 40" Extension Arm (Chrome-plated)
Chrome-plated Steel and Aluminum Alloy, Permanently Attached Grip Head
Special Order
Contact us for an ETA
You Pay:
$159.00
Avenger D400 4.5" Grip Head with Junior Pin
Aluminium Alloy Construction, 1 1/8" Junior Pin, 1 1/8" Receiver
Special Order
Contact us for an ETA
You Pay:
$229.00
Avenger D200 2.5" Grip Head (Black)
Aluminum Construction, 5/8" Stand Mount
Special Order
Contact us for an ETA
You Pay:
$129.00
Avenger D200 2.5" Grip Head
Aluminium Construction, 5/8" Stand Mount, Includes T-Top
Special Order
Contact us for an ETA
You Pay:
$129.00
Avenger D250 Gag Gobo Grip Head
Aluminum Alloy Construction, Double Grip Head
Special Order
Contact us for an ETA
You Pay:
$99.95
Backscatter Flex Arm for Light & Motion Sola Lights (15cm)
- 6 Loc-Line Ball & Socket Joints
- Joints Can be Removed to Shorten Length
- Base Piece with 1/4"-20 Screw
- Requires Sola Light Loc-Line Mount Kit
Usually ships in 4 - 6 weeks
You Pay:
$78.95
Backscatter 1" Ball Mount Base for Double Handle Tray
- For Backscatter Double Handle Tray
- Use to Attach Light/Strobe Arms
Usually ships in 4 - 6 weeks
You Pay:
$42.95
Backscatter Flex Arm with YS Adapter End (30cm)
- 12 Loc-Line Ball & Socket Joints
- For Attaching YS Style Mount Lights
- Joints Can be Removed to Shorten Length
- Base Piece with 1/4"-20 Screw
Usually ships in 4 - 6 weeks
You Pay:
$109.00
Backscatter Mini Flex Arm for Light & Motion Sola Video Lights (30cm)
- 12 Loc-Line Ball & Socket Joints
- Joints Can be Removed to Shorten Length
- Base Piece with 1/4"-20 Screw
- Requires Sola Light Loc-Line Mount Kit
Usually ships in 4 - 6 weeks
You Pay:
$109.00
Chauvet CTC-50HCN Narrow Half Coupler
1,650 lb Load Capacity, Aluminum Alloy Construction
Usually ships in 2 - 3 weeks
You Pay:
$45.95
CHAUVET CLP-25N Narrow Swivel Coupler Clamp
Narrow design fits between cross braces with ease, Made of aluminum
Usually ships in 2 - 3 weeks
You Pay:
$59.95
CHAUVET CLP-15N Narrow Half Coupler Clamp
Narrow design fits between cross braces with ease, Made of aluminum
Usually ships in 2 - 3 weeks
You Pay:
$34.95
Inovativ Baby Pin Bracket with Pin for Dual Bar
- Provides offset support for Dual Bar
- Add Monitor to Dual Bar
- Compatible with Baby Pin Accessories
- Connects to Bar with 3/8"-16 Screw
Contact us for an ETA
You Pay:
$169.00
Inovativ Baby Pin Attachment for Insight Monitor Mount System
- Single baby-pin
- Supports Compatible Receivers, Transmitters, Antennas & More
- Secures to Vertical System Bracket on Inovativ Insight
Contact us for an ETA
You Pay:
$149.00
Inovativ Corner Plug With Baby Pin For Apollo, Deploy & Center Mast Bracket
- Baby Pin is 6061 aluminium with clear anodise
- Corner Plug machined 6061 T6 aluminium and anodised orange
- For Apollo, Deploy & Center Mast Bracket
- Useful to mount Inovativ's DigiSystem Pro and Lite
Contact us for an ETA
You Pay:
$169.00
Inovativ 5/8" Baby Pin Mast Adapter
- Mount 5/8" Baby Pin to 1.75" Mast
- 48 cm of Height Adjustment
Contact us for an ETA
You Pay:
$539.00
Inovativ Baby Pin System
- Machined from 6061 T6 Aluminium
- Rod Machined 6061 T6 Aluminium
- Anodised Black
- Clamp to any Upright Post
- Overtube Style Design
Contact us for an ETA
You Pay:
$589.00
Inovativ Dual Bar with Two Standard Baby Pins and Two Pro Monitor Mounts
- Mount Monitors and Accessories on Stand
- Allows you to mount multiple monitors to Inovativ Axis
- 3/8"-16 and 1/4"-20 Mounting Threads
- 2 x Monitor Mounts, 2 x Standard Baby Pins
- Mount up to 18 Optional Baby Pins
Contact us for an ETA
You Pay:
$1,499.00
Impact Baby Triple Header
- Five Welded Steel Baby Pins
- 5/8" Receiver
- Chrome-Plated Steel Construction
- Multiple Mounting Options
- Combo 1-1/8" Pin / 5/8" Receiver
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$139.00
Impact 5/8" Snap-in Pin for Super Clamps (Black)
Used to connect a lighting fixture to a Super Clamp
In stock
Ships tomorrow
$16.95
You Pay:
$12.95
$16.95
Impact Double Ended Spigot with 1/4"-20 and 3/8" Male Threads
Features both 1/4"-20 and 3/8" male thread sizes
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$25.95
Impact SRP-113 Long Double Stud 5/8"
Ideal for use with super clamp or other grip and mounting accessories
Stock due this week
You Pay:
$17.95
Impact 5/8" Receiver to 5/8" Pin Adapter
- Aluminium Female to Male Adapter
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$36.95
Impact Grip Head for Lights and Accessories - 2.5" Diameter (Black)
Mounts Lights / Accessories on C-Stands
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$78.95
Impact Double Ball Joint Head with Super Clamp and Camera Platform Kit
3 piece kit to support cameras up to 2.3 kg
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$169.00
Impact Double Ball Joint Head with Camera Platform Kit
2 piece kit that supports cameras up to 2.3 kg
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$119.00
Impact Standard Stud for Super Clamp with 1/4"-20 Male Threads
Mounts cameras and other accessories directly onto the Super Clamp
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$13.95
Impact 6"/15cm Baby Pin Wall Plate
- 5/8" Diameter Pin
- Chrome-Plated Steel Construction
- 8 Anchor Points
- Safety Cable Hole
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$42.95
Impact Double Ball Joint Head
A handy accessory for mounting lights or other gear
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$81.95
Impact Heavy Duty Swivel Pin
Adds articulation to your stand or boom
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$94.95