(no ratings yet) Thanks for your rating!
Vello Tripod Collar A (White) for Canon 200mm f/2.8, 70-200mm f/4 & 400mm f/5.6Product #33091 | SKU TC-AW |(no ratings yet) Thanks for your rating!
- Professional Grade
- Improves Tripod-Mounted Lens Balance
- Vertical Alignment Marks
- Simple to Instal and to Remove
- Rotates for Horizontal/Vertical Shooting
The Tripod Collar A (White) for Canon 200mm f/2.8, 70-200mm f/4 & 400mm f/5.6 Lenses from Vello is designed for use with the Canon 200mm f/2.8L II, 70-200mm f/4L (IS and non-IS versions) and 400mm f/5.6L lenses. The ring makes rotating your lens easier, and the built-in tripod collar improves lens balance by screwing into the tripod mount. This collar has vertical alignment marks for quickly changing the orientation from horizontal to vertical. Using the included bushing, either a 3/8" or a 1/4" tripod mount can used.
Improves Lens Balance
The ring secures your lens to the camera's tripod.
Gives Your Camera Setup Better Balance
The ring adds stability to your camera and lens. Due to its weight, when the lens is mounted with a camera on a tripod, the centre of gravity is shifted to the lens. The ring attaches to the tripod and can be shifted to adjust the balance.
Having the camera secured with a ring around the lens makes it possible to rotate the lens between landscape and portrait modes without removing the camera from the tripod. The friction thumbscrews can then be tightened to secure the camera in the desired position. When not needed, the ring can be rotated to an out of the way position.
Thumbscrews Tighten And Loosen Ring
Having thumbscrews control the ring makes it easy to adjust the tripod ring on the go.
|Lens Compatibility||Canon 400mm f/5.6 L, 70-200mm f/4 L IS, and 70-200mm f/4 L lenses|
|Tripod Mount Thread Size||3/8" & 1/4"|
|Footprint||Approx. 46 x 38mm|
In The Box
- Vello Tripod Collar A (White) for Canon 200mm f/2.8, 70-200mm f/4 & 400mm f/5.6
- 3/8" to 1/4" Adapter