PowerShield Commander Tower 1100VA
Usually ships in 4 - 6 weeks
Our Price
$829.00
Usually ships in 4 - 6 weeks
Email me when stock arrives
Shipping & Availability
Usually ships in 4 - 6 weeks.
Deliver to
Auckland
for $28.00
Change location
Click & Collect Availability
Wellington
Out of stock.
Pickup in
4 - 6 weeks
Click & Collect
Overview
A Line Interactive UPS with Automatic Voltage Regulation
Description
The PowerShield Commander is a sophisticated pure sine wave, line interactive UPS. On top of featuring Automatic Voltage Regulation (AVR), it provides a Pure Sine Wave output while in backup mode. This UPS is a cost-effective solution for protecting applications such as networking, telecom, security and motors.
Key Features
- Pure Sine Wave Output
- Output Power Factor 0.9
- Free, programmable Power Management
- Ultra Modern, Informative LCD – Shows Battery Time Remaining
- ECO Mode
- Smart AVR
- Emergency Power Off Function
- Multiple Communication Available with faster SNMP Card
Specifications
Capacity | 1000VA/990W |
Topology | Line Interactive, Pure Sine Wave |
INPUT | |
Nominal Voltage | 240V AC |
Acceptable Voltage Range | 162V~290V AC |
Frequency | 50/60Hz ±5Hz (auto sensing) |
OUTPUT | |
Voltage Regulation (AC Mode) | 240V AC (Selectable 208/220/230V AC) ± 10% AVR |
Voltage Regulation (Batt. Mode) | ± 1.5% (before battery alarm) |
Frequency Range (Batt. Mode) | 50Hz or 60Hz ±1Hz |
Current Crest Ratio | 3.1 |
Total Harmonic Distortion | 2% max @ 100% linear load, 5% max @ 100% non-linear load (before low battery alarm) |
Transfer Time | 6ms (Typical), 10ms max. |
Waveform (Batt. Mode) | Pure Sine Wave |
EFFICIENCY | |
AC Mode | 98% (Advanced ECO design) |
Battery Mode | 89% |
BATTERY | |
Standard Model | Battery Type & Number: 12V/9AH (x2) Recharge Time: 4 hours recover to 90% capacity |
PROTECTION | |
Full Protection | Overload, thermal, short circuit, discharge and overcharge protection |
Surge Protection | 1968J/39000A |
ENVIRONMENT | |
Operation Temperature | 0°C~40°C |
Relative Humidity | 0%~90% (RH non-condensing) |
Noise Level | <45dB |
COMMUNICATIONS & MANAGEMENT | |
Interface | USB and RS-232 as standard, an Intelligent slot for PSSNMP, PSModbus or PSAS400 dry contact |
Software | PowerShield NetGuard® software - supports Windows-based operating system, Linux, Unix and Mac |
LCD display | AC mode, Batt. Mode, Load Level, Input Voltage, Output Voltage, Overload, Fault, Battery Replacement, Low Batt., Batt. Time Remaining |
Audible alarm | Battery Mode, Low Battery (Batt. Mode), Battery Replacement, Fault, Overload |
PHYSICAL | |
Dimensions (D x W x H) | 397 x 145 x 220mm |
Weight | 12.9/14.4kg |
COMPLIANCE | |
Safety | EN62040-1 -1 2003, IEC 60950-1 -1 |
EMC | EN62040-2 2006 |
RoHS | Directive 2011/65/EU |
In The Box
- Commander UPS
- User Guide
Reviews
(no ratings yet)
Own or use this product?
Give it a quick rating:
Thanks for your rating!
Share your thoughts with other customers:Give it a quick rating:
Thanks for your rating!
Write a review
Details
- Product: PowerShield Commander Tower 1100VA
- Manufacturer: Powershield
- Model: PSCM1100
- SKU: PSCM1100
- RM Product #: 55931
- Warranty: See here for Warranty Terms view terms