Rolls RM82 8-Channel Mic/Line Mixer
Features
- 8 x 3-Pin XLR Microphone Inputs
- 8 x 1/4" TS Line Inputs
- 1/4" Jacks Configurable as Inserts/Outs
- Mono XLR Main Output with Level Knob
- 48 VDC Phantom Power per Channel
Description
When you need a space-saving solution for mixing multiple mic/line signals in conference rooms, houses of worship, or small-scale concert venues, consider the 1 RU rack-mountable Rolls RM82 8-Channel Mic/Line Mixer eight-channel mixer. It features eight balanced 3-pin XLR microphone inputs with individually selectable 48 VDC phantom power to accommodate dynamic or condenser microphones. Plus, its eight unbalanced 1/4" TS inputs offer easy connectivity for line-level inputs or may be configured to function as inserts (for external processing) or direct outputs (for routing to a multitrack recorder). A mono RCA auxilliary input accepts an additional line input.
Adjustable trim, level knobs, and treble/bass cut circuits on each channel allow simple and efficient mixing control from the front panel. The summed mono output is fed through a master level control to a rear-panel XLR male connector. Plug the RCA output into an audio recorder to preserve a dedicated mix signal that is independent of the master level.
Key Features:
- Eight balanced microphone inputs via 3-pin XLR female sockets
- Eight unbalanced line inputs via 1/4" TS jacks
- Each line input can be internally jumpered to function as a channel insert or direct output
- Per-channel tone control cuts up to 12 dB of treble (above 6 kHz) or bass (below 200 Hz)
- Adjustable trim and level on each channel
- Line-level XLR main output can be switched internally to output mic-level signal
- Ninth unbalanced input via mono RCA aux input jack
- RCA pre-fader output is independent of the master level control
- Connect the RCA pre-fader output to the RCA aux input of a second RM82 (available separately) to enable master level control of both devices from the first RM82
- Dedicated power switch and LED power indicator
- Rack-mountable enclosure occupies just 1 RU of rack space
Specifications
Total # Of Inputs | 8 |
Mic/Line Inputs | 8 x 3-Pin XLR Female (Balanced) 8 x 1/4" TS (Unbalanced, Internally Switchable per Channel to Function as Insert or Direct Output) |
AUX Sends | None |
AUX Returns | None |
ALT I/O | 1 x RCA Coaxial Mono Aux Input 1 x RCA Coaxial Mono Pre-Fader Output |
Monitor Outputs | 1 x 3-Pin XLR Male (Internally Switchable from Line to Mic Level) |
AEQ Section | Per-Channel Tone Control: Cut up to 12 dB of Treble above 6 kHz or Bass below 200 Hz |
Solo/Mute | No |
Gain Range | Mic: Up to 55 dB Line: Up to 26 dB |
Channel Level Control | Per-Channel Level Knob |
Trim/Gain Control | Per-Channel Trim Knob Master Level Knob |
Phantom Power | +48 VDC, Switchable per Channel |
Metering | None |
Input Impedance | XLR: 10 kOhms 1/4": 20 kOhms RCA: 10 kOhms |
Output Impedance | 51 Ohms |
Maximum Input Level | Mic: 0 dBV Line: +6 dBV |
Maximum Output Level | +22 dBV |
Frequency Response | Not Specified by Manufacturer |
Phase Shift | |
Signal-to-Noise Ratio | 106 dB |
Total Harmonic Distortion (THD) | |
CMRR | >80 dB (Mic) |
Power Supply | 120 VAC, 50/60 Hz, 15 VA |
Dimensions (W x H x D) | 19.0 x 1.8 x 6.0" / 48 x 4.5 x 15 cm |
Weight | 7 lb / 3.2 kg |
In The Box
- Rolls RM82 8-Channel Mic/Line Mixer
Reviews
(no ratings yet)Give it a quick rating:
Thanks for your rating!
Write a review
Details
- Product: Rolls RM82 8-Channel Mic/Line Mixer
- Manufacturer: Rolls
- Model: RM82
- SKU: RM82
- RM Product #: 39120