SHOP MARCH BRAND BLITZ! Up to 35% OFF!

Sachtler System FSB 4 Fluid Head with Sideload Plate, Flowtech 75 Carbon Fiber Tripod has been discontinued, here are some related products you might like:

Sachtler FSB 4 Fluid Head Sachtler FSB 4 Fluid Head
Sachtler Pedestal C III with Dolly XL Sachtler Pedestal C III with Dolly XL
Sachtler 3985 Accessory Mount Sachtler 3985 Accessory Mount
Sachtler Cover EFP 2 Hard Shipping Case Sachtler Cover EFP 2 Hard Shipping Case
Sachtler Flowtech 75 MS Carbon Fiber Tripod Sachtler Flowtech 75 MS Carbon Fiber Tripod

Sachtler System FSB 4 Fluid Head with Sideload Plate, Flowtech 75 Carbon Fiber Tripod

Product #48007 | SKU ST-0395-NZ | Sachtler
On Backorder what does this mean?
Not currently for sale
Contact us for more information
On Backorder what does this mean?

Features

  • FSB 4 Fluid Head with Sideload Plate
  • Head with Load Capacity of up to 4 kg
  • For Small Camcorders, DSLRs & Mirrorless
  • 5-Step Counterbalance
  • Flowtech 75 Carbon Fibre Legs

Description

This Sachtler System FSB 4 Fluid Head with Sideload Plate, Flowtech 75 Carbon Fibre Tripod with Mid-Level Spreader and Rubber Feet supports cameras and accessories weighing up to 4kg, and is well suited for DSLRs, mirrorless cameras, and small camcorders. The head features a sliding balance plate with 4.7"(120mm) of adjustment to balance your camera, 5 steps plus zero of counterbalance adjustment and 3 steps plus a zero setting of independent pan and tilt drag. This amount of adjustability combines to give you precise control of your camera on the head, and the ability to easily tune your set up on a shot-by-shot basis.

The Flowtech legs are a lightweight set of tripod legs that can be used with or without the included mid-level spreader. The legs support up to 20 kg, which means they can easily handle the weight of the FSB 4 Fluid Head with Sideload plate as well as your camera and accessories. The legs extend from approximately two feet to five feet and are extremely resistant to twisting when you pan. Additionally, each leg features a single locking lever near the top that allows you to open the leg sections to raise or lower the leg. The included padded carry bag is for storing or transporting the head and legs.

With its 4kg capacity and compact size, the Sachtler FSB 4 Fluid Head is ideal for supporting small handheld camcorders and video-enabled DSLRs. As the only head in its class to feature Sachtler's Snap & Go sideload mechanism, the FSB 4 boasts an exceptionally large sliding range of 120mm (4.7"). Along with a 5-step counterbalance, this ensures extremely quick and precise balancing. At the same time, no-compromise vibration damping allows for extremely subtle and finely graded movement.

The Sachtler Flowtech 75 MS Carbon Fibre Tripod with Mid-Level Spreader and Rubber Feet eschews the common single or double carbon fibre tube design and instead has redesigned the shape of the legs for improved torsional strength. The legs work weigh just under 3.17 kg yet they can support a payload of up to 20 kg, and extend from a minimum height of 60.96 cm to a maximum height of 154.94 cm when using the included removable mid-level spreader. Each leg features a single clamping lever that locks and unlocks the sections.

Each leg extends or retracts independently from the other two, and when it is detached from the spreader each leg can pivot without affecting the other legs. This is especially useful when working on rough or uneven terrain. You can remove the spreader completely and lock each leg in one of three positions, so you can work without a spreader if you wish. This enables you to spread the legs extremely wide for low shots, while the tripod legs maintain their torsional stability. The dual spikes at the end of each leg provide extra grip when working on softer ground, and you can snap rubber feet onto the dual spikes for better grip when working on hard or delicate surfaces.

With dimensions of 93 x 20 x 23 cm, this Padded Bag from Sachtler is designed specifically for carrying a flowtech 75 or TT tripod equipped with an FSB fluid head. It is made with a high-density 900D fabric, which is both flame retardant and water-resistant to help ensure that your equipment stays safe. Additionally, layers of both open-cell and closed-cell foam are used in the construction to protect your gear against small bumps and shocks.

The bag opens via a full-length zipper found at the top, which allows for easy access while shooting. For transport, two straps on each side can be connected to an integrated handgrip for easy carrying. There are also small handles on each side of the bag where the zipper ends, and right next to them are D-rings that can be used to connect an optional shoulder strap. Finally, a clear plastic window on the outside allows you to insert a tag with your name or phone number for easy identification when travelling.

Features

  • Long sliding range of camera plate
  • Robust, metal housing
  • Tested Speedbalance technology
  • Totally compatible with SOOM and the Sachtler FSB CELL
  • Dual-stage, carbon fibre, 75mm bowl tripod
  • Weighs only 2.9 kg but supports up to 20 kg
  • The design and construction of the legs provide tremendous torsional stability. In other words, the legs resist twisting when you pan the tripod head.
  • The included mid-level spreader allows you to work on uneven terrain such as stairs or rocks while preventing the legs from flying apart. When using the mid-level spreader, you can use the included rubber feet to protect delicate surfaces from the tripod's foot spikes.
  • Each leg features a single clamping lever lock design at the top of the leg, near the 75mm bowl. This allows you to loosen all three leg sections from a single location, saving you time while reducing the wear and tear on your body as you don't have to bend down to loosen a leg lock at the bottom to lower or raise the legs.
  • The legs incorporate a locking mechanism that enables the legs to move completely freely, suitable when working with a spreader, or to lock at one of three angles, suitable for use when working without a spreader.
  • When closing the legs, there is room for the mid-level spreader to be folded up while remaining attached. The legs feature a magnetic locking system strong enough to hold them together during transport, but allows you to easily release the legs when you want to set them up.
  • Padded bag with dimensions of 93 x 20 x 23 cm, designed for carrying a flowtech 75 or TT tripod with an FSB fluid head
  • 900D water-resistant fabric on the exterior, with layers of foam to help cushion gear against bumps
  • Full-length zipper allows for easy access to the interior compartment
  • Connecting hand straps, side handles, and D-rings available for transport
  • Clear plastic window on one of the sides allows you to insert a name tag for easy identification

Specifications

FSB 4 Fluid Head
Load Capacity 8.8 lbs (4kg)
Diameter/Thread 75mm Bowl/Flat Base
Counter Balance System 5 Steps
Counter Balance Range 4.7" (120mm)
Quick Release/Wedge Plate Yes
Balance Plate Sideload Plate S
Tilt Drag 3 Steps
Tilt Range +90° to -70°
Tilt Lock Independent
Spring Loaded Counter Balance 3 Steps
Pan Range 360°
Pan Lock Independent
Levelling Bubble/Illuminated Yes/No
Temperature Range -40°C to +60°C)
Height 16.3cm
Weight 1.9kg
Flowtech 75 MS Carbon Fibre Tripod with Mid-Level Spreader and Rubber Feet
Leg Stages/Sections 2-stage (3-section)
Height Range With Mid-Level Spreader: 63 - 157 cm Without Mid-Level Spreader: 26 - 153 cm
Collapsed Height 68 cm
Load Capacity 20 kg
Head Attachment Fitting 75 mm bowl
Material Legs :
Carbon fibre

Head Attachment Fitting :
Aluminium
Leg Lock Type Lever clamp
Weight 2.9 kg
Padded Bag for flowtech 75 or TT Tripod with FSB Fluid Head
Material Brushed polyester
Open-cell foam
AEPA/EVA closed-cell foam
ABS honeycomb frame
Polypropylene
900D fabric
Type of Closure Zipper
Padded Yes; open and closed-cell foam
Carrying/Transport Options Connecting top strap with grip
2 x Side handles
2 x D-rings
Dimensions (L x H x W) 93 x 20 x 23 cm
Weight 1.8 kg

In The Box

  • FSB 4 Fluid Head
  • Mid-Level Spreader
  • 3 x Removable Rubber Feet
  • Padded Bag for flowtech 75 or TT Tripod with FSB Fluid Head
  • Limited 1-Year Warranty

Reviews

0.0 (no ratings yet)
Own or use this product?
Give it a quick rating:
Thanks for your rating!
Share your thoughts with other customers:
Write a review

Details

  • Product: Sachtler System FSB 4 Fluid Head with Sideload Plate, Flowtech 75 Carbon Fiber Tripod
  • Manufacturer: Sachtler
  • Model: ST-0395-NZ
  • SKU: ST-0395-NZ
  • RM Product #: 48007
  • Load Capacity: 20.0 kg
  • Material: Carbon Fibre
  • Weight: 2.90 kg
  • Closed Length: 68 cm
  • Minimum Height: 63.0 cm
  • Maximum Height: 157.0 cm

Recently Viewed

View All