Sachtler 1017 ACE XL Tripod System with Sideload Plate and Flowtech 75 Carbon Fiber Tripod Legs has been discontinued, here are some related products you might like:
Sachtler 1017 ACE XL Tripod System with Sideload Plate and Flowtech 75 Carbon Fiber Tripod Legs
Features
- ACE XL Fluid Head with Slide-In Plate
- Load Capacity 2 to 8 kg
- For Camcorders, DSLRs, & Mirrorless
- 8-Step Counterbalance
- Flowtech 75 Carbon Fibre Legs
Description
This Sachtler System ACE XL with ACE XL Fluid Head and Flowtech 75 Carbon Fibre Tripod supports cameras and accessories weighing between 2 and 8 kg, and is well suited for DSLRs, Mirrorless, and small- to medium-sized camcorders. The head features a sliding balance plate with 10.4 cm of adjustment to balance your camera, 8-steps of counterbalance adjustment and 3-steps plus a zero setting of independent pan and tilt drag. The slide-in plate features 10.4 cm of travel, and this amount of adjustability combines to give you precise control of your camera on the head, and the ability to easily tune your set up on a shot-by-shot basis.
The included Flowtech legs are a lightweight set of tripod legs that can be used without a spreader. The legs support up to 20 kg, which means they can easily handle the weight of the ACE XL Fluid Head as well as your camera and accessories. The legs extend from approximately two feet to five feet, and are extremely resistant to twisting when you pan. Additionally, each leg features a single locking lever near the top of the leg that allows you to open the leg sections to raise or lower the leg. There is room for an optional mid-level spreader, and the legs feature a magnetic locking system strong enough to hold them together during transport, but weak enough to easily release the legs when you want to set them up. The included padded carry bag is for storing or transporting the head and legs.
The Sachtler Ace XL Fluid Head (75mm Bowl) is designed for digital cine-style cameras, supporting rigs weighing up to 8 kg. This fluid head is suitable for larger DSLR and mirrorless MFT cameras, as well as pro-style cameras such as the Blackmagic URSA Mini/Pro, Canon C200/C300 Mk II, Sony FS series, and the Panasonic EVA1. The Ace XL fluid head features eight steps of counterbalance and three steps of pan and tilt drag adjustment, plus a zero drag option for pan and tilt.
Mount your camera using the Ace XL Fluid Head's slide-in balancing plate with 1/4-20" screw and locating pin. With a sliding range of 4.1" this head can adapt to variously configured rigs. Additional features include a detachable, right-side pan bar and an illuminated bubble level. With an integrated flat head base, the Ace XL can be configured for shooting with a slider.
With dimensions of 93 x 20 x 23 cm, this Padded Bag from Sachtler is designed specifically for carrying a flowtech 75 or TT tripod equipped with an FSB fluid head. It is made with a high-density 900D fabric, which is both flame retardant and water-resistant to help ensure that your equipment stays safe. Additionally, layers of both open-cell and closed-cell foam are used in the construction to protect your gear against small bumps and shocks.
The bag opens via a full-length zipper found at the top, which allows for easy access while shooting. For transport, two straps on each side can be connected to an integrated handgrip for easy carrying. There are also small handles on each side of the bag where the zipper ends, and right next to them are D-rings that can be used to connect an optional shoulder strap. Finally, a clear plastic window on the outside allows you to insert a tag with your name or phone number for easy identification when travelling.
Features
Compatible Cameras
- Including but Not Limited To: Blackmagic URSA Mini/Mini Pro Canon C200/C300 Mk II Sony FS series Panasonic EVA1
Ace XL Fluid Head Features
- Fluid head with 8 kg capacity suited for larger DSLR and mirrorless MFT cameras, and for pro-style digital cine cameras
- Eight steps of counterbalance; three steps of pan and drag plus zero settings for disengaging the pan and tilt tension
- 75mm ball-based head has an integrated flat bottom useful for mounting to sliders, etc.
- Additional features include a four-inch sliding plate range, 1/4"-20 camera screw, right-side pan bar and illuminated bubble level
- Padded bag with dimensions of 93 x 20 x 23 cm, designed for carrying a flowtech 75 or TT tripod with an FSB fluid head
- 900D water-resistant fabric on the exterior, with layers of foam to help cushion gear against bumps
- Full-length zipper allows for easy access to the interior compartment
- Connecting hand straps, side handles, and D-rings available for transport
- Clear plastic window on one of the sides allows you to insert a name tag for easy identification
Specifications
Ace XL Fluid Head (75mm Bowl) | |
Payload Capacity | 2 to 8 kg |
Counterbalance | 8 steps |
Pan / Tilt Drag | 3 steps + zero |
Sliding Balance Plate Travel | 4.1" () |
Tilt Range | +90° / -75° |
Head Attachment Fitting | 75 mm bowl (integrated flat base) |
Levelling Bubble | Illuminated |
Operating Temperature | -30 to 60°C) |
Weight | 1.7 kg |
Padded Bag for flowtech 75 or TT Tripod with FSB Fluid Head | |
Material | Brushed polyester Open-cell foam AEPA/EVA closed-cell foam ABS honeycomb frame Polypropylene 900D fabric |
Type of Closure | Zipper |
Padded | Yes; open and closed-cell foam |
Carrying/Transport Options | Connecting top strap with grip 2 x Side handles 2 x D-rings |
Dimensions (L x H x W) | 93 x 20 x 23 cm |
Weight | 1.8 kg |
In The Box
- Ace XL Fluid Head (75mm Bowl)
- Sideload Plate S/Ace Tripod QR Plate
- Pan Bar for Ace Tripods
- Limited 1-Year Warranty
- Flowtech 75 Carbon Fibre Tripod with Three Removable Rubber Feet
Reviews
(no ratings yet)Give it a quick rating:
Thanks for your rating!
Write a review
Details
- Product: Sachtler 1017 ACE XL Tripod System with Sideload Plate and Flowtech 75 Carbon Fiber Tripod Legs
- Manufacturer: Sachtler
- Model: 1017
- SKU: ST-1017-NZ
- RM Product #: 48013
- Load Capacity: 20.0 kg
- Minimum Height: 63.0 cm
- Closed Length: 68 cm
- Material: Carbon Fibre
- Weight: 2.90 kg
- Maximum Height: 157.0 cm