Sennheiser SK2000XP-AW Bodypack transmitter

Description

The Sennheiser SK2000XP-AW - Bodypack transmitter is a lightweight yet extremely rugged bodypack transmitter, and it is a delight for both the musician and the audience. With an AF frequency response of 25 to 20,000 Hz, it transmits even the sound of a bass guitar with rich fundamentals. Four RF output powers provide longer transmission ranges or more channels per frequency range. The rechargeable batteries of the SK 2000 (optional) can be charged right in the unit using the external charging contacts.

Product Features

• Sturdy all-metal housing
• Up to 75 MHz switching bandwidth
• 20 fixed frequency banks with up to 64 compatible presets
• 6 banks each with up to 64 tunable channels
• Frequency setting in 25 kHz steps
• Pilot tone squelch for interference-free operation
• External charging contacts for recharging battery BA 2015 in the transmitter
• Backlit display on transmitter (keystroke activation)
• Auto-lock feature to prevent buttons from being pressed accidently
• Audio and RF MUTE feature for muting the transmitter
• Wide range of accessories for virtually any use
• Enhanced audio frequency response in the bass range for optimum transmission from bass guitars
• Input sensitivity above 60 dB can be set in 3 dB steps
• Transmitters can be configured from the receiver menu
• Can be synchronized with the receiver using infrared interface
• Wide range of accessories for virtually any use

Delivery Includes

• 1 SK 2000 bodypack transmitter
• 2 AA 1.5 V batteries
• 1 instruction manual
• 1 supplementary frequency sheet
• 1 supplementary RF power sheet

Specifications

• Modulation: FM
• RF frequency range:516 - 558 MHz
• Carrier frequencies: max. 3000
• Preset frequencies: max. 64
• Switching bandwidth: max. 75 MHz
• RF output power: 10, 30, 50 and 100 mW
• Nominal deviation: ±24 kHz
• Peak deviation: ±48 kHz
• Compander: HDX
• Frequency response - Line: 25-18000 Hz / Mic: 80 - 18000 Hz
• THD, total harmonic distortion: < 0,9 %
• Signal-to-noise ratio: > 120 dB(A) (@ 1 mV, peak deviation)
• In compliance with : CE , FCC, IC
• Audio-XLR connector: Sennheiser (3-pin) Socket
• Power supply: 2 x 1,5 V (AA)
• Operating time: typ. 8 h
• Max. Input voltage: 3 Veff (mic + line)
• Input impedance - Mic: 40 kO / Line: 1 MO
• Dimensions: 82 x 64 x 24 mm
• Weight: 160 g