SHAPE 15mm Lightweight Rod System for Canon 200 Camera

Description

The SHAPE 15 mm Lightweight Rod System is designed for use with the Canon 200 cinema camera. The system includes the Canon C200 camera cage, a baseplate with Rod Bloc, an extendable top handle, and two 12" (30.5 cm) 15 mm rods.

The camera cage is designed for the Canon EOS C200. It is made of CNC Machined aluminium and offers several mounting points and threaded holes to attach other SHAPE parts and third-party accessories. The cage also includes an ARRI rosette on the right side for attaching the Remote Extension Handle or C200 Handle.

The baseplate comes with a pair of 12" (30.5 cm) 15 mm rods that run through its length. It features three attachment points for securing your camera and tripod plate attachment via three 1/4"-20 mounting holes.

The SHAPE Camera Cage is designed for use with the Canon EOS C200 cinema camera. It is made of CNC Machined aluminium and offers several mounting points and threaded holes to attach other SHAPE parts and third-party accessories. The cage also includes an ARRI rosette on the right side for attaching the Remote Extension Handle or C200 Handle.

The SHAPE Baseplate is designed for use with the Canon C200 camera. It comes with a pair of 15 mm rods that are 12" (30.5 cm) long through the length of the baseplate. The baseplate features three attachment points for securing your camera and tripod plate attachment via three 1/4"-20 mounting holes.

This pair of  Shape 15 mm Aluminium Rods (12") connect into your camera rig, extend it, and let you add various Shape and third-party accessories compatible with 15mm rods. With these two rods and with a few fundamental accessories, you can most certainly even begin building your own rig from scratch.

The rods are each 15 mm in diameter, 12 inches (30.5 cm) long, hollow, non-threaded, and made of reliable aluminium coated with a clear finish.

Features

Camera Cage for Canon EOS C200

• Three 1/4"-20 captive screws secure your C200 camera
• Locking mechanical system secures the cable handle
• Bottom section of the cage features an adapter plate with several 1/4"-20 and 3/8"-16 threaded holes, suitable for optimising your C200 camera balance on a tripod, gimbal, or drone
• Top section of the cage features a top plate, allowing you to mount the C200 Top Handle at different positions to optimise your balance when shoulder-mounted
• Quickly adjust or remove the cage with the help of an Allen key, included and magnetically attached to the bottom of the cage

Baseplate with 15 mm Rod System for Canon C200 Camera

• Attaches underneath the camera via 3/8"-16 and 1/4"-20 screws
• Ratchet key knobs to reposition the Rod Bloc system
• The 15 mm Lightweight Rod System (LWS) is designed to respect the C200 optical centre
• Four rubber pads at the top of the base protect and securely hold your C200 camera
• Unscrewing the bottom section of the baseplate with an Allen key (included) reveals an adapter plate with several 1/4"-20 and 3/8"-16 threaded holes, suitable for optimising your C200 camera balance on a tripod, gimbal, or drone
• Allen key attaches to the bottom of the baseplate via a magnet