SHAPE Bundle Rig with Follow Focus Pro and 4 x 5.6" Matte Box for Panasonic AU-EVA1

Description

The SHAPE Bundle Rig is a camera support system designed for the Panasonic AU-EVA1, and is suitable for either handheld or shoulder-mounted shooting. It includes the BP0008 V-Lock Quick Release Baseplate, one V-lock replacement pad, a pair of telescopic handles with push button, one two-stage 4 x 5.6" matte box, one Follow Focus Pro, and a pair each 8" (20 cm) and 4" (10 cm) 15 mm aluminium rods.

The V-lock quick release baseplate is designed for larger cameras like the ALEXA, F5, C300, and broadcast cameras. It can be used tripod or shoulder-mounted, or attached to V-lock tripod adapters. The baseplate includes a removable shoulder pad and features rosette adapters for SHAPE and ARRI standard handles. It has 1/4"-20 and 3/8"-16 tripod mount threads, and a V-lock Delta adapter for attaching to the Sony VCT-14 or Panasonic SHAN-TM700 tripod adapter. The shoulder pad secures on by touch fasteners. The tripod mount threads are located underneath the shoulder pad. Both 8" (20 cm) and 4" (10 cm) 15 mm rods are included for the front and back. The two-stage 4x5.6" matte box can be used as a clip-on or can be mounted on industry-standard 15 mm rod systems.

The SHAPE BP0008 V-Lock Quick Release Baseplate is a long format baseplate for larger cameras like the Alexa, F5, C300, and broadcast cameras. It can be used shoulder mounted, tripod mounted, and attached to V-lock tripod adapters.

The baseplate includes a removable shoulder pad and features rosette adapters for SHAPE and ARRI standard handles. It has 1/4"-20 and 3/8"-16 tripod mount threads and a V-lock delta adapter for attaching to the Sony VCT-14 or Panasonic SHAN-TM700 tripod adapter. The shoulder pad secures on by touch fasteners. The tripod mount threads are located underneath the shoulder pad. 8" (20 cm) and 4" (10 cm) 15 mm rods are included for the front and back.

This baseplate is the same as the SHAPE BP0007 except it is lighter and has a modified rod adapter in front. The reduced weight is the result of a thinner design, and the rod adapter features one ratchet knob instead of two, allowing quicker rod adjustments. For attaching a matte-box and other accessories, the rod adapter can be adjusted vertically if you remove the screw holding it in position. This baseplate also supports optional SHAPE 15mm Studio and 19mm Studio adapters in place of the included one.

The baseplate features three camera mount slots, all supporting 1/4"-20 and 3/8"-16 screws. The off-centre slots allow you to mount your camera offset if you use a 15mm Studio Adapter. 1/4"-20 and 3/8"-16 mounting threads are peppered behind the three slots for attaching articulating arms and other accessories. Two 1/4"-20 and two 3/8"-16 camera mount screws are included. This baseplate is best used with cameras that use external viewfinders.

The V-Lock Replacement Pad from SHAPE is a replacement shoulder pad for the V-lock system BP6000 and  BP7000. The pad utilises a hook-and-loop system which allows for easy attachment and removal. The additional padding provided by the strap increases user comfort and reduces strain on the shoulder.

The black and red Telescopic Handles with ARRI Rosettes from SHAPE  are left and right handgrips that can be attached to cameras and camera support hardware that has standard ARRI rosettes. Each arm features three points of articulation, combined with the approximately two inches of arm extension allows you to adjust the arms for your comfort. The arms attach to your camera or support via an ARRI compatible rosette with spring-loaded locking levers, which allow you to lock your arms in place without having a full 360° of rotation.

Shape's unique push-button articulating joint provides additional articulation near the rosette, while a second push-button articulation joint allows you to rotate and precisely position the rubber handgrips. A second spring-loaded locking lever along the arms allows you to extend the arms up to two inches (5.08 cm) and rotate the handgrips throughout 360°. The arms are indexed for extension and rotation, so you can quickly move between known setups.

The 2-Stage 4 x 5.6" Matte Box from SHAPE can be used as a clip-on matte box or can be mounted on industry-standard 15 mm rod system. It is designed for light control, insertion, and adjustment of filters. It features a two-stage rotating 4 x 5.6" filter holder. The matte box accepts lenses with a front diameter up to 114 mm. It comes with six step-down rings that allow you to fit lenses with an outer diameter of 52, 58, 62, 67, 72, 77, and 82 mm as well.

The SHAPE Follow Focus Pro mounts on 15 mm rods and features an adjustable arm which puts the gear at the optimal position for the lens, no matter what the diameter is. The unit snaps onto 15 mm rods, allowing for quick attachment, removal, and re-positioning. Two 0.8 pitch gears come included and give you a choice of either 28 teeth or 43 teeth - depending on the throw distance of the lens. Additional features include two adjustable hard stops, removable marking disc, and an industry standard accessory port for using optional whips and cranks.

Features

V-Lock Quick Release Baseplate

• Long format baseplate for larger cameras
• Can be used shoulder mounted, tripod mounted, and attached to V-lock tripod adapters
• Includes removable shoulder pad
• Features rosette adapters for SHAPE and ARRI standard handles
• 1/4"-20 and 3/8"-16 tripod mount threads
• V-lock delta adapter for the Sony VCT-14 or Panasonic SHAN-TM700 tripod adapter
• Vertically adjustable rod adapter with one ratchet knob
• Three camera mount slots
• 1/4"-20 and 3/8"-16 accessory mount threads
• 8" (20 cm) and 4" (10 cm) 15 mm rods

Telescopic Handles with ARRI Rosettes (Black & Red)

• The push-button locking joint enables independent rotation throughout 360°.
• Spring-loaded locking levers allow you to tighten or loosen the lever even when you do not have space to turn the lever throughout the entire 360° range.
• The arms feature two inches of extension and are indexed every 5 mm of extension.
• The arms can rotate through 360° and feature 30° of index markings.

Compatibility
Photo lenses with a minimum diameter of 52 mm Professional video optics with up to 114 mm front diameter

• Includes 6 step-down rings (52 to 82, 58 to 82, 62 to 82, 67 to 82, 72 to 82, 77 to 82 mm)
• Made in Canada

Follow Focus Pro

• Snap-on 15 mm rod attachment
• Adjustable arm
• Two 0.8 pitch aluminium gears included: 28 teeth and 43 teeth
• Interchangeable gear position
• Adjustable hard stops
• Removable marking disc
• Industry standard accessory port
• CNC machined aluminium parts