SHAPE Bundle Rig with Follow Focus Pro for Panasonic AU-EVA1 Camera

Description

The SHAPE Bundle Rig is a camera support system designed for the Panasonic AU-EVA1 camera and is suitable for handheld or shoulder-mounted shooting. It includes one BP0008 V-Lock Quick Release Baseplate, one V-Lock Replacement Pad, one HAND3 Telescopic Handle for ARRI Rosette, two 15 mm Aluminium Rods (8" / 20 cm), two 15 mm Aluminium Rods (4" / 10.2 cm), and one Follow Focus Pro.

The BP0008 V-Lock Quick Release Baseplate is a long-format baseplate for larger cameras like the ALEXA, F5, C300, and broadcast cameras. It can be used shoulder-mounted, tripod-mounted, and attached to V-Lock tripod adapters. The baseplate includes a removable shoulder pad and features rosette adapters for SHAPE and ARRI standard handles. It has 1/4"-20 and 3/8"-16 tripod mount threads and a V-Lock delta adapter for attaching to the Sony VCT-14 or Panasonic SHAN-TM700 tripod adapter. The shoulder pad secures on by touch fasteners. The tripod mount threads are located underneath the shoulder pad. Also included are 8"(20 cm) and 4"(10.2 cm) 15 mm rods for the front and back.

The SHAPE BP0008 V-Lock Quick Release Baseplate is a long format baseplate for larger cameras like the Alexa, F5, C300, and broadcast cameras. It can be used shoulder mounted, tripod mounted, and attached to V-lock tripod adapters.

The baseplate includes a removable shoulder pad and features rosette adapters for SHAPE and ARRI standard handles. It has 1/4"-20 and 3/8"-16 tripod mount threads and a V-lock delta adapter for attaching to the Sony VCT-14 or Panasonic SHAN-TM700 tripod adapter. The shoulder pad secures on by touch fasteners. The tripod mount threads are located underneath the shoulder pad. 8"(20 cm) and 4"(10.2 cm) 15 mm rods are included for the front and back.

This baseplate is the same as the SHAPE BP0007 except it is lighter and has a modified rod adapter in front. The reduced weight is the result of a thinner design, and the rod adapter features one ratchet knob instead of two, allowing quicker rod adjustments. For attaching a matte-box and other accessories, the rod adapter can be adjusted vertically if you remove the screw holding it in position. This baseplate also supports optional SHAPE 15 mm Studio and 19 mm Studio adapters in place of the included one.

The baseplate features three camera mount slots, all supporting 1/4"-20 and 3/8"-16 screws. The off-centre slots allow you to mount your camera offset if you use a 15 mm Studio Adapter. 1/4"-20 and 3/8"-16 mounting threads are peppered behind the three slots for attaching articulating arms and other accessories. Two 1/4"-20 and two 3/8"-16 camera mount screws are included. This baseplate is best used with cameras that use external viewfinders.

The V-Lock Replacement Pad from SHAPE is a replacement shoulder pad for the V-lock system BP6000 and  BP7000. The pad utilises a hook-and-loop system which allows for easy attachment and removal. The additional padding provided by the strap increases user comfort and reduces strain on the shoulder.

The Telescopic Handle for ARRI Rosette from SHAPE is a versatile and adjustable handgrip that attaches to an ARRI standard rosette on the left or right side of your camera rig. It offers 1.5"(3.81 cm) of extension and uses push-button mechanisms on the extension arm and handle for adjusting the height and rotation of the handles to meet your needs and preference. The push-button on the handle is a huge benefit when you want to adjust the angle on-the-fly, without having to remove your hand or set down the rig.

This pair of  Shape 15 mm Aluminium Rods (8") connect into your camera rig, extend it, and let you add various Shape and third-party accessories compatible with 15 mm rods. With these two rods and with a few fundamental accessories, you can most certainly even begin building your own rig from scratch.

The rods are each 15 mm in diameter, 8 inches(20 cm) long, hollow, non-threaded, and made of reliable aluminium coated with a clear finish.

This pair of  Shape 15 mm Aluminium Rods (4") connect into your camera rig, extend it, and let you add various Shape and third-party accessories compatible with 15 mm rods. With these two rods and with a few fundamental accessories, you can most certainly even begin building your own rig from scratch.

The rods are each 15 mm in diameter, 4 inches(10.2 cm) long, hollow, non-threaded, and made of reliable aluminium coated with a clear finish.

The SHAPE Follow Focus Pro mounts on 15 mm rods and features an adjustable arm which puts the gear at the optimal position for the lens, no matter what the diameter is. The unit snaps onto 15 mm rods, allowing for quick attachment, removal, and re-positioning. Two 0.8 pitch gears come included and give you a choice of either 28 teeth or 43 teeth - depending on the throw distance of the lens. Additional features include two adjustable hard stops, removable marking disc, and an industry standard accessory port for using optional whips and cranks.

Features

BP0008 V-Lock Quick Release Baseplate

• Long format baseplate for larger cameras
• Can be used shoulder mounted, tripod mounted, and attached to V-lock tripod adapters
• Includes removable shoulder pad
• Features rosette adapters for SHAPE and ARRI standard handles
• 1/4"-20 and 3/8"-16 tripod mount threads
• V-lock delta adapter for the Sony VCT-14 or Panasonic SHAN-TM700 tripod adapter
• Vertically adjustable rod adapter with one ratchet knob
• Three camera mount slots
• 1/4"-20 and 3/8"-16 accessory mount threads
• 8"(20 cm) and 4"(10.2 cm) 15 mm rods

Telescopic Handle for ARRI Rosette

• Each connection point independently rotates 360° at the push of a button
• Ratchet knob unlocks extendable arm; arm provides 1.5"(3.81 cm) of extension
• Markings on extendable arm help you remember preferred settings
• CNC-machined aluminium parts with stainless steel locking mechanism

Follow Focus Pro

• Snap-on 15 mm rod attachment
• Adjustable arm
• Two 0.8 pitch aluminium gears included: 28 teeth and 43 teeth
• Interchangeable gear position
• Adjustable hard stops
• Removable marking disc
• Industry standard accessory port
• CNC machined aluminium parts