SHAPE Offset Rig for Canon C200 Camera

Description

The SHAPE Offset Rig for Canon EOS C200 is for handheld shooting and specifically designed to work with the C200 cinema camera. It includes one Canon C200 Baseplate, one PAD3 Mini Composite Shoulder Pad, one PAD1 Composite Shoulder Pad, one HAND5 Quick Handle with Rod Block, two each 15 mm 10" (25.4 cm) and 12" (30.5 cm) aluminium rods, and one Offset Bracket for Blackmagic Cage.

The Canon C200 Baseplate attaches underneath the camera via 3/8”-16 and 1/4”-20 screws. It comes with a pair of 15 mm rods that are 12”(30.5 cm) long through the length of the baseplate. The Mini Composite Shoulder Pad is a comfort-padded and comfort-shaped shoulder pad for the back of your camera rig.

The HAND5 Quick Handle features two handles that can rotate individually on a 360° axis by pushing the red push button system. Once the buttons are released, the handles are secured firmly in place. You can achieve precise positioning by sliding the Rod Bloc system along the 15 mm rods, securing the handles by tightening the single red knob on the Rod Bloc.

The SHAPE Baseplate is designed for use with the Canon C200 camera. It comes with a pair of 15 mm rods that are 12" (30.5 cm) long through the length of the baseplate. The baseplate features three attachment points for securing your camera and tripod plate attachment via three 1/4"-20 mounting holes.

The Shape Quick Handle + Rod Block is a professional video stabilisation accessory with 2 camera handles, each providing an individual rotation angle of 360°. You can attach the handle to the camera platform using a simple screw knob. A simple push button located at the articulation allows easy attachment and removal.

Combined with the anodised aluminium Rod Block, the Quick Handle offers composite camera support for all 15 mm rods. You can achieve precise positioning by sliding the Quick Handle along the rods and tightening the small red knob located on the Rod Block. With 2 screw-threaded holes, the Rod Block provides for attachment of components such as the Quick Handle.

The SHAPE Mini Composite Shoulder Pad is a comfort-padded and comfort-shaped shoulder pad for the back of your camera rig. Outfitted with a 15 mm-mount SHAPE Rod Block, the pad attaches right onto a pair of 15 mm rods, slides into the best position on them, and tightens in place by a quality lever. It also has a black Screw Knob under which you can add a SHAPE Counter Weight or a SHAPE Back Pad, both optional and both back-supported accessories that work as extensions of the shoulder pad. The Screw Knob's screw is a 1/4"-20 screw. If you remove the Screw Knob, you'll have yourself a 1/4"-20 screw-hole to add various 1/4"-20-mount accessories into.

The Back Pad from SHAPE is a standard rig component included with most SHAPE camera rigs. Its design features a powder coated anodised aluminium plate and arm which are attached to a thick padding on the side facing the user. The pad is easy to both attach and remove from your rig, and it supports the SHAPE BOX attachment. Additionally, the pad's position can be adjusted to the user's preference– up to 2" (5 cm) vertically and 360° horizontally.

This pair of  Shape 15 mm Aluminium Rods (10") connect into your camera rig, extend it, and let you add various Shape and third-party accessories compatible with 15 mm rods. With these two rods and with a few fundamental accessories, you can most certainly even begin building your own rig from scratch.

The rods are each 15 mm in diameter, 10 inches (25.4 cm) long, hollow, non-threaded, and made of reliable aluminium coated with a clear finish.

This pair of  Shape 15 mm Aluminium Rods (12") connect into your camera rig, extend it, and let you add various Shape and third-party accessories compatible with 15 mm rods. With these two rods and with a few fundamental accessories, you can most certainly even begin building your own rig from scratch.

The rods are each 15 mm in diameter, 12 inches (30.5 cm) long, hollow, non-threaded, and made of reliable aluminium coated with a clear finish.

The SHAPE Off-Set Bracket will fit on the SHAPE Blackmagic Cage and Shoulder Mount.

Features

Baseplate with 15 mm Rod System for Canon C200 Camera

• Attaches underneath the camera via 3/8"-16 and 1/4"-20 screws
• Ratchet key knobs to reposition the Rod Bloc system
• The 15 mm Lightweight Rod System (LWS) is designed to respect the C200 optical centre
• Four rubber pads at the top of the base protect and securely hold your C200 camera
• Unscrewing the bottom section of the baseplate with an Allen key (included) reveals an adapter plate with several 1/4"-20 and 3/8"-16 threaded holes, suitable for optimising your C200 camera balance on a tripod, gimbal, or drone
• Allen key attaches to the bottom of the baseplate via a magnet

Quick Handle

• Provides professional video stabilisation with 2 handles
• Each handle offers 360° individual rotation
• Offers easy attachment/removal

Rod Block

• Composed of anodised aluminium
• Offers composite camera support for all 15 mm rods
• Provides precise positioning of the Quick Handle along the rods via the tightening of the small red knob
• With 2 screw-threaded holes, the Rod Block provides for attachment of components

Compatible Support Series

• Composite
• Cameleon
• Sumo
• Spider