SHAPE Shoulder Mount for Panasonic AU-EVA1

Description

The Shoulder Mount from SHAPE is a shoulder rig system with lightweight support (LWS) for the Panasonic AU-EVA1 camera. It includes one EVAB15 Baseplate with Rod Bloc, one HAND5 Quick Handle with Rod Bloc and Push Button System, a pair of 15 mm 18"(45.7 cm) rods, and one shoulder pad support.

The baseplate is designed for use with the Panasonic AU-EVA1, and features four attachment points for securely mounting the camera. It includes a pair of 15 mm rods that are 18”(45.7 cm) long and run through the length of the baseplate. The handle and shoulder pad allow you to use the rig for handheld or tripod shooting.

The Quick Handle features two handles that can rotate individually on a 360° axis by pushing the red push button system. Once the buttons are released, the handles are secured firmly in place. You can achieve precise positioning by sliding the Rod Bloc system along the 15 mm rods, securing the handles with the red knob on the Rod Bloc.

The SHAPE Baseplate with 15 mm Rod System is designed for use with the Panasonic AU-EVA1 camera. It features four attachment points for securely mounting the AU-EVA1 to a camera rig. The baseplate also comes with a pair of 15 mm rods that are 12”(30.5 cm) long through the length of the baseplate.

By unscrewing the bottom section of the baseplate with the included Allen key, you get an adapter plate featuring several 1/4"-20 and 3/8"-16 mounting holes for mounting and balancing your camera on equipment like a tripod, gimbal, or drone.

These Shape's 15mm Rods are a pair of 18" long rods that fit studio and LWS 15 mm rod clamps, allowing you to use available rod mounted accessories. This pair of rods are approximately 18"(45.7 cm) long and machined from hollow aluminium tubes. The rods feature chamfered ends that make it easier to insert into available 15 mm rod clamps.

The Shape Quick Handle + Rod Block is a professional video stabilisation accessory with 2 camera handles, each providing an individual rotation angle of 360°. You can attach the handle to the camera platform using a simple screw knob. A simple push button located at the articulation allows easy attachment and removal.

Combined with the anodised aluminium Rod Block, the Quick Handle offers composite camera support for all 15 mm rods. You can achieve precise positioning by sliding the Quick Handle along the rods and tightening the small red knob located on the Rod Block. With 2 screw-threaded holes, the Rod Block provides for attachment of components such as the Quick Handle.

Features

Baseplate with 15 mm Rod System for Panasonic AU-EVA1

• Attaches underneath the camera with 3/8"-16 and 1/4"-20 screws
• Three 1/4"-20 and one 3/8"-16 mounting holes for securing the camera or a tripod plate
• Ratchet key knobs to reposition the Rod Bloc system
• Four rubber pads at the top of the base protect and securely hold your Panasonic AU-EVA1 camera
• Allen key is fixed via a magnet at the bottom of the baseplate for easy accessibility

15mm Rods (18", Pair)

• Pair of aluminium support rods for 15 mm rod clamps.
• 18"(45.7 cm) long rods with chamfered ends that guide the rod into an available rod clamp, even if the rod isn't perfectly aligned or is at a slight angle to the rod clamp.

Quick Handle

• Provides professional video stabilisation with 2 handles
• Each handle offers 360° individual rotation
• Offers easy attachment/removal

Rod Block

• Composed of anodised aluminium
• Offers composite camera support for all 15 mm rods
• Provides precise positioning of the Quick Handle along the rods via the tightening of the small red knob
• With 2 screw-threaded holes, the Rod Block provides for attachment of components