×
Shure SCM810 8-Channel Microphone Mixer
Product #65807 | SKU SCM810
Usually ships in 3 - 4 weeks
0.0 (no ratings yet) Thanks for your rating!


Shure SCM810 8-Channel Microphone Mixer

Product #65807 | SKU SCM810
Usually ships in 3 - 4 weeks


Product Features
  • Rackmnt. Microphone Mixer.
  • For Sound Reinforcement.
  • 8 Mic Line Level Inputs.
  • Provides 48V Phantom Power.
  • Accepts Dynamic or Condenser.
Customer Reviews
0.0 (no ratings yet) Thanks for your rating!
Email me when stock arrives
Product Details
  • Product: #65807
  • SKU: SCM810
Our Price $3,999.00

Delivery - $9.90*
3 - 4 weeks
Pickup AUCKLAND
3 - 4 weeks
Pickup WELLINGTON
3 - 4 weeks
*estimated shipping to Auckland

Overview

Part of Shure's Automatic series of mixers, the Shure SCM810 8-Channel Microphone Mixer provides a feature set and sonic quality suitable for any sound reinforcement scenario. The SCM810 features 8 Mic/Line level inputs via removable Block Connectors. All inputs are balanced and provide phantom power for condenser microphones. There are 8 direct outputs (1 per input channel) for direct routing of incoming signal to recorders monitors etc. Low-cut filter and High-shelving AEQ switches are provided on all input channels. In addition to the mixers sonic quality, the SCM810's automatic features offer complete, hands free operation between multiple microphones.

It has 7 position-programmable switches to provide further modifications to internal features; the limiter threshold, off-attenuation level, and hold time can be adjusted, and the mixer can be switched between manual and automatic modes.

The SCM810's Noise Adaptive threshold distinguishes between constant background noise and audio signal fluctuating in pitch, level and consistency (speech). The threshold continuously adjust so that speech levels louder than background noise activate that channel. The Max Bus feature controls the number of channels that activate when triggered by a signal. The Max Bus feature can be set so that one talker activates one channel, even if multiple microphones "hear" that talker. This results in a constant switching between talkers on a panel or discussion. Last Mic Lock-On feature keeps the most recently used mic active so that ambient room signal remains when mics are not in use. The result is a natural uninterrupted signal flow.

Key Features:

Noise Adaptive Threshold

Part of the SCM810's "automatic" features, the Noise Adaptive Threshold feature distinguishes between constant background noise (such as air conditioning) and changing sound (such as speech) for each input channel. The SCM810 automatically adjusts threshold so that speech levels louder than background noise are allowed passage.

Max Bus

The Max Bus feature controls the amount of microphones that are active in any given moment. One talker activates one channel, even if multiple microphones "hear" that talker.

Last Mic lock-On

This feature leaves the last mic used active. This ensures that audio signal generated from room ambience will always be present. The result is a natural sound without pauses or breaks in signal.

Removable Block Connectors

All mic input channels feature removable 3 pin block connectors. All inputs accept active balanced microphone or line level signal.

Programmable Dip Switches

7 position programmable switches provide further modifications to internal features. Limiter Threshold, Off-Attenuation level, and Hold Time can be adjusted. The mixer can be switched between Manual and Automatic modes and the Last Mic Lock feature is defeatable as well.

Microphone Logic Connector

A standard DB25 male output connector interfaces with external control devices for complete remote operation. Custom configurations of features can be triggered remotely from simple cough switches to elaborate computer controlled remote stations.

Direct Outputs

All 8 input channels feature direct outputs via 1/4" phone connections. All direct outputs are pre gate and pre AEQ but can be modified internally for post gate operation.

Cascadability

The Link In/Out jacks provided in the rear allow multiple SCM810's to be cascaded for up to 400 microphone channels.

Specifications

Inputs 8 - Removable Block Connectors, balanced microphone or line level input
Output 8 - Direct Outputs (ch 1-8) 1/4" Phone jacks
Monitor/Headphone Out 1 - 1/4" TRS Phone jack (Headphone)
ALT I/O 1 - AUX line input 1/4" Phone (front panel)
1 - Microphone Logic connection DB25 male connector
Link Input/Output 2 - Link In / Link Out 1/4" Phone jacks
Impedance Input
MIC: Designed for use with 19-600 ohm load, 1.6k ohms actual, -15dBv clipping level
LINE: Designed for use with - / < 2k ohm load, 10k ohms actual, +22dBV clipping level
AUX: Designed for use with - / < 2k ohm load, 10k ohms actual, +22dBV clipping level
SEND/RETURN: Designed for use with - / < 2k ohm load, 10k ohms, +18dBV
Output
LINE: Designed for use with >600 ohm load, 60 ohms actual, +18dBV clipping level
HEADPHONES: Designed for use with 8-200 ohms, 60 ohm recommended, 300 ohms actual, +12dBV clipping level
DIRECT OUT: Designed for use with > 2k ohm load, 1k ohms actual, +18dBV clipping level
SEND/RETURN: Designed for use with > 2k ohm load, 1k ohms actual, +18dBV clipping level
Gain Low-impedance mic (150 ohms)Input: Line 80dB, Headphones 88dB, Direct Out 34dB - Outputs
Line Input: Line 40dB, Headphones 48dB, Direct Out -6dB - Outputs
Aux Input: Line 44dB, Headphones 52dB, - Outputs
Send/Return Input: Line 20dB, Headphones 28dB - Outputs
Hum & Noise Equivalent Input Noise: -125dBV (150 ohm source; through 400Hz - 20kHz filter)
Equivalent Input Hum and Noise: -123 dBV (150 ohm source; through 20Hz - 20kHz filter)
Output Hum and Noise: Master full counterclockwise -90dBV, Master full clockwise -70dBV (through 20Hz to 20kHz filter; channel controls full clockwise)
Frequency Response 50Hz to 20kHz +/- 2dB; -3dB corner at 25 Hz (Ref 1 kHz, channel controls centred)
Distortion <0.1% at +18 dBV output level, 50Hz to 20kHz
Metering 4 segment LED's
Controls Sealed Rotary Pots: Microphone channels 1-8, AUX input, Headphone and Master gain controls
Recessed Rotary Controls: Low Cut Filter and High- Frequency Shelving channels 1-8
Phantom Power Switches located in rear
Control Voltage Out No
Phantom Power 46 Vdc open-circuit through 6.8k ohms series resistance per DIN 45 596
Operating Temperature Operating: 0 to 60 degrees C (32 to 140 degrees F)
Storage: -30 to 70 degrees C (-20 to 165 degrees F)
Power SCM810: 120 Vac rated nominal, 50/60Hz, 200mA
SCM810E: 230 Vac rated nominal, 50/60Hz, 100mA
Dimensions 1.75 x 19.13 x 12.4 (44.5 x 483 x 317mm) (H x W x D)
Weight 9.57 lbs (4.3kg)

In The Box

  • Shure SCM810 8-Channel Microphone Mixer.
  • Power Cord.
  • Rack Mount Hardware.

Reviews

0.0 (no ratings yet)
Own or use this product?
Give it a quick rating:
Thanks for your rating!
Share your thoughts with other customers:
Write a review
Details
  • Product: Shure SCM810 8-Channel Microphone Mixer
  • Manufacturer: Shure
  • Model: SCM810
  • SKU: SCM810
  • RM Product #: 65807