Shure P2TR215CL Wireless In Ear Monitoring System
Overview
Description
The Shure P2TR215CL is a multi channel, 8 frequency UHF wireless monitoring system in the PSM 200 family, sold as a complete kit, consisting of the P2T transmixer, a combination transmitter and dual input mono mixer, the P2R receiver, and the SE215 stereo earphones. Wireless in-ear monitoring provides much more mobility on the stage and effectively eliminates the need for stage monitors, thus offering the performers a much roomier stage and a feedback-free environment for the house and monitor engineers. This uniquely designed and budget-conscious hybrid system offers both wired and wireless connectivity to both performer and engineer.
The P2T transmixer provides the connector link to the house or monitor mixing console, supporting both balanced and unbalanced feeds. Compact, with accessible level controls and offering the input and routing capabilities of a small mixer, the transmixer also offers a respectable RF output for cleaner and more reliable reception on stage.
The P2R portable beltpack receiver is the personal onstage monitoring component of the PSM 200 wireless monitoring system. The P2R offers a very lightweight and compact plastic construction, and is visually inconspicuous. The sound is clear and the reception reliable, and the unique addition of a 1/4" jack offers the performer wired connectivity to additional mix sources such as a direct box or instrument processor.
The SE215 earphones provide a reliable earpiece solution for the PSM 200 series receivers or other receivers in the PSM family of in ear monitor systems. They use Dynamic MicroSpeakers to deliver clear, natural audio with an extended bass response for a rich, lifelike listening experience. A personalized fit kit ensures that you get the best comfort and sound isolation possible. The in-ear design allows the earphones to effectively reduce ambient noise by as much as 90 percent. The detachable cable can be easily replaced, and the 3.5mm plug offers wide compatibility.
Key Features
Dual Function Transmitter
- P2T transmixer doubles as remote dual input audio mixer in a single unit; XLR Split Out connectors enable chain routing of multiple P2T's and pass signal unaffected by individual level settings
Front Panel Level Control
- Sturdy volume knobs adjacent to inputs for quick access
Rack Mountable
- Transmitter is a 1/2 space rack unit, rack kit included
Multi Channel
- Multi Channel frequency support offers greater freedom from RF interference at operating locale
Channel Scan Mode
- Enables monitoring and selection from receiver of clearest, interference free frequency at operating locale
Compact, Beltpack Receiver
- Lightweight, miniature, and wireless; 1/4" input connector enables wired audio connectivity independent of transmitter; switchable wired only functionality available
Sealed, Isolating Earpiece
- Replaces large, bulky stage monitors for clean stage appearance and increased mobility
Specifications
RF Carrier Frequency Range |
518-553 MHz |
Selectable Channels |
8 |
Compatible Channels |
4 |
Operating Range |
Up to 300' (90.9 m) |
Frequency Response |
30Hz to 12kHz, (+0, -3db @ 1kHZ) |
Signal-to-Noise Ratio |
80dB Typical |
Channel Separation |
No (Mono System) |
RF Output Power |
30mW (+15dBm) |
Frequency Selection |
Push to Select Button |
Frequency Indicators |
LED Displays Selected Frequency, 1-8 |
Antenna |
External 1/4 Wavelength, Semi-rigid, Permanently Mounted |
Audio Input Connectors |
Combined 1/4" and XLR Left and Right |
Nominal Input Level |
-25dBu at 1/2 Volume |
Maximum Input Level |
-5dBu at 1/2 Volume |
Input Pad Switch |
No |
Phantom Power Protection |
Yes, up to 52VDC |
Loop In/Out Connectors |
No |
Loop I/O Nominal Input Level |
No |
Loop I/O Maximum Input Level |
No |
Limiting |
Built-in, Fixed Threshold |
Power Requirements |
External Power Supply, 120VAC |
Dimensions (WxDxH) |
8.6 x 5.6 x 1.7" (218 x 142 x 43mm) |
Weight |
13 oz (369g) |
RF Indicator |
LED |
Channel Scan Mode |
Yes |
Frequency Selection |
Push Button Select and Increment |
Antenna |
Attached Flexible Whip |
Power Requirements |
9V Battery |
Battery Life |
Approx 4 hours; Varies According to Volume Level and Type, Quality and Output Level of Earphones |
Battery Status Indicator |
LED |
Limiting |
Built-in, Fixed Threshold |
Equalization |
No |
Personal Mix Control |
HI or LO Gain Switch and Volume Knob |
Dimensions (HxWxD) |
4.8 x 2.9 x 1.25" (122 x 73 x 32mm) |
Weight |
3.52 oz (100g) |
Reviews
(no ratings yet)Give it a quick rating:
Thanks for your rating!
Write a review
Details
- Product: Shure P2TR215CL Wireless In Ear Monitoring System
- Manufacturer: Shure
- Model: P2TR215CL
- SKU: P2TR215CL
- RM Product #: 16490
- Warranty: 2 year manufacturer warranty (excluding consumable e.g. lithium-ion batteries).