SmallRig Full Cage & NATO Top Handle Kit for Blackmagic Pocket Cinema Camera 6K/4K
- Full Cage for BMPCC 6K or 4K Camera
- HDMI & USB Type-C Cable Clamp
- NATO Top Handle, Samsung T5 SSD Mount v2
- Multiple Accessory Threads & Mounts
- Maintains Open Access to Camera Ports
- Product: #85566
- SKU: 3130
Add protection and a variety of accessories to your Blackmagic Pocket Cinema Camera 6K or 4K with this Full Cage & NATO Top Handle Kit from SmallRig. The kit includes a full, formfitting camera cage, a NATO top handle, an HDMI/USB Type-C cable clamp, and an SSD mount for the Samsung T5 drive.
The cage is designed to fit the camera without blocking access to any ports or slots, and it features numerous mounting threads, NATO rails, and a shoe mount. The top handle mounts on top of the cage using its NATO clamp, and it provides additional mounting threads, a 15mm rod clamp, and shoe mounts. The cable clamp mounts onto the cage to prevent your HDMI and USB cables from pulling or disconnecting. The SSD drive mount also attaches to the cage using screws and keeps a Samsung T5 drive and cable secure when recording.
SmallRig Full Cage for Blackmagic Pocket Cinema Camera 6K/4K
The dedicated Full Cage for Blackmagic Pocket Cinema Camera 6K/4K from SmallRig is a protective frame that enables you to mount accessories onto your Blackmagic Design Pocket Cinema Camera 6K or 4K. One shoe mount, several NATO rails, and multiple 1/4"-20, 3/8"-16, and ARRI-style accessory threads are built into the cage's top and sides.
Access to the camera's controls, compartments, and connectors is maintained when the cage is fitted to the camera. The versatile cage incorporates locating pins and rubber pads for a snug fit on your BMPCC 6K or 4K camera. It also features strap holes to add a hand strap or neck strap. An Allen wrench that stores in the base is included to help tighten the camera screw.
SmallRig NATO Top Handle with 15mm Rod Clamp
The cheese-style NATO Top Handle from SmallRig mounts easily onto a standard NATO rail on your camera cage or rig to facilitate a low-angle shot and provide multiple accessory mounts. In addition to one 15mm rod clamp, this handle incorporates three shoe mounts, four ARRI-style anti-twist threads, and multiple 1/4"-20 and 3/8"-16 threads.
The top handle is made from aluminium and stainless steel and can slide side to side to help balance your camera rig. An Allen wrench for tightening the thumbscrew is included and can be stored in the handle.
SmallRig HDMI & USB Type-C Cable Clamp for Select BMPCC 6K/4K Cages
The revamped HDMI & USB Type-C Cable Clamp from SmallRig is compatible with the SmallRig 2203B, CVB2254B, and CVB2255B cages for the Blackmagic Pocket Cinema Camera 6K and 4K. Designed to prevent the camera's HDMI and USB Type-C cables from accidentally disconnecting, this clamp attaches to the side of the cage using two easy-to-grasp knurled 1/4"-20 screws.
Each screw adjusts a sliding block that can be tightened to accommodate varying diameters. This Cable Clamp is constructed of a sturdy aluminium alloy and comes with an Allen wrench.
SmallRig Samsung T5 SSD Mount v2 for BMPCC 6K/4K & Z CAM E2 Cages
The Samsung T5 SSD Mount v2 from SmallRig enables you to attach a Samsung T5 SSD to select SmallRig cages for the Blackmagic Pocket Cinema Camera 6K/4K and URSA Mini Pro 4.6K G2, as well as the Z CAM E2 camera.
This SSD mount offers flexible positioning on your cage using the included 1/4"-20 screws. It securely clamps both the T5 SSD and the connected USB Type-C cable via locking levers. The mount's offset design helps avoid interference with an attached top handle, side handle, or other accessories.
|Material of Construction||Aluminium|
|Accessory Mounting||Multiple 1/4"-20 and 3/8"-16 Threads
Multiple ARRI-Style Accessory Threads
Multiple NATO Rails
1 x Shoe Mount
|Dimensions||7.6 x 4.5 x 3" / 19.2 x 11.5 x 7.5 cm|
|Weight||10.6 oz / 300 g|
|Grip Type||Topside Handle with Cheeseplate-Style Handle|
|Attachment Method||Attaches via Rail Clamp|
|Rod Standard||15 mm Single Rod|
|Rod Ports||1 x 15 mm Rod Port|
|Accessory Mounting||Handle Shaft
Multiple x 1/4"-20 Thread
Multiple x 3/8"-16 Thread
3 x ARRI Anti-Twist 3/8"-16 Thread
1 x ARRI Anti-Twist 3/8"-16 Thread
|Shoe Mounting||3 x Built-In Cold Shoe Slot|
|Rail Mounting||1 x NATO Rail Clamp|
|Dimensions||5.3 x 2.7 x 1" / 134 x 69 x 24.5 mm|
|Weight||6.3 oz / 180 g|
|Mounting Screw||2 x 1/4"-20|
|Material of Construction||Aluminium Alloy|
|Dimensions||1.5 x 1.3 x 1.2" / 39 x 34 x 29.5 mm|
|Weight||1.6 oz / 45 g|
|Material of Construction||Aluminium Alloy|
|Dimensions||2.8 x 1.9 x 1.3" / 72 x 49 x 34 mm|
|Weight||2.2 oz / 63 g|