Tascam MX-8A 8-Input / 8-Output Matrix Mixer with DSP
this item may be nonreturnable
Features
- Microphone/Line Input Switching.
- 48V Phantom Power.
- Mic Input Pad.
- Microphone Gain.
- Compressor.
Description
The Tascam MX-8A 8-Input / 8-Output Matrix Mixer with DSP features eight mic/line inputs and eight-line outputs on Euroblock connectors as well as integrated DSP for audio optimisation in various environments and configurations. It can be used to mix mic and playback-equipment audio signals into eight different zones for easy setup and adjustment by both system integrators and end users, making it suitable for stores, restaurants, or banquet rooms.
The MX-8A's onboard DSP provides a full set of audio processing for mic and line inputs including compression, four-parametric AEQ, auto level, ducking, and more. In addition, the output DSP offers 10-band AEQ, high-pass filters, low-pass filters, delay, and limiter effects.
Additionally, Tascam's MX Connect remote control software is designed for integrators and provides control over the configuration and settings of the entire system. Tascam's EZ Connect software is designed for end-users and provides control over a variety of settings. The MX-8A 8-Input / 8-Output Matrix Mixer with DSP includes a power cord, sixteen Euroblock plugs, a cable band kit, and a rackmount screw kit.
Key Features:
- Matrix mixer with eight mic/line input channels and eight line output channels
- Euroblock terminals, which are optimal for permanent installations, used for input/output connectors
- Extensive onboard DSP for audio processing according to application and conditions
- Remote control via Ethernet possible
- USB audio interface supports easy recording and background music playback with a computer
- Support for serial control systems possible with built-in RS-232C connector
- RS-485 connector enables connection of a dedicated external controller
- Compact 1U rackmount size
Specifications
| Format | 44.1 kHz / 48 kHz, 16-Bit / 24-Bit |
| Connector | 4-Pin USB b-Type |
| Transfer Rate | USB 2.0 High-Speed (480 Mbps) |
| Analogue In | Connector: Euroblock (Balanced) 3.81 mm Pitch |
| Minimum Input Level | -70 dBu |
| Maximum Input Levels | Microphone: +26 dBu Line: +24 dBu Input Impedance: 2.2 kOhms or Higher |
| Analogue Output | Connector: Euroblock (Balanced) 3.81 mm Pitch |
| Nominal Output Level | +4dBu (When Ref.Level Set to Other Than -9 dBFS) +6dBu (When Ref.Level Set to -9 dBFS) |
| Maximum Output Level | Switchable: +15 dBu (Ref.Level: -9 dBFS) +18 dBu (Ref.Level: -14 dBFS) +20 dBu (Ref.Level: -16 dBFS) +22 dBu (Ref.Level: -18 dBFS) +24 dBu (Ref.Level: -20 dBFS) |
| Output Impedance | 200 Ohms or Lower |
| RS-485 | Connector: RJ-45 Cables: Category 5e or Faster STP Cables |
| Ethernet | Connector: RJ-45 Transmission Protocol: TCP/IP Ethernet Standard: 100BASE-TX Cables: Category 5e or Faster STP Cables |
| Power | AC 100 to 240 V, 50/60 Hz |
| Power Consumption | 21 W |
| Operating Temperature Range | 32 to 104°F / 0 to 40°C |
| Dimensions (W x H x D) | 19.0 x 1.8 x 12.0" / 48.3 x 4.5 x 30.4 cm |
| Weight | 6.6 lb / 3.0 kg |
In The Box
- Tascam MX-8A 8-Input / 8-Output Matrix Mixer with DSP.
- Power Cord.
- Euroblock Plugs.
- Cable Band Kit.
- Rackmount Screw Kit.
Reviews
(no ratings yet)Give it a quick rating:
Thanks for your rating!
Write a review
Details
- Product: Tascam MX-8A 8-Input / 8-Output Matrix Mixer with DSP
- Manufacturer: Tascam
- Model: TASCAMMX-8A
- SKU: TASCAMMX-8A
- RM Product #: 65771
Recently Viewed
View AllTascam MX-8A 8-Input / 8-Output Matrix Mixer with DSP
