Teradek Bolt 500 XT SDI/HDMI Wireless Deluxe Kit with One Transmitter, Two Receivers (Gold Mount)
Features
- Up to 500' Range Line of Sight
- Supports up to 1080p60 Resolution
- Backwards Compatible with Select Systems
- 3G-SDI Inputs/Outputs
- Cross Conversion
Description
With the Teradek Bolt 500 XT 3G-SDI/HDMI Wireless Transmitter you can transmit visually lossless 3G video signals to a Bolt 500 receiver with zero latency. The Bolt XT is compatible with existing third-generation Bolt systems such as the Bolt 500, 1000, Sidekick II, and 703 Bolt, as well as the Bolt LT. The transmitter unit can be secured to a camera or other SDI/HDMI video source via a built-in 1/4"-20 threaded hole, as well as two M3 threaded holes. The included antennas provide a powerful signal that can travel up to 500' line of sight.
A shoe mount is included for attaching to cameras without 1/4"-20 threads. For convenience, both a standard BNC cable and HDMI cable are included so you can plug in right out of the box. Power can be provided using the integrated 2-pin connector via the included D-Tap power cable. The transmitter supports up to four receivers. Built-in AES-128 encryption protects your video from prying eyes, while noise rejection helps keep your video clean even when working around 2.4 and 5.8 GHz signals.
Key Features:
- Backward compatible with third-generation Bolt 500, 1000, 300, Sidekick II, and 703 Bolt
- HDMI and 3G-SDI inputs, with 3G-SDI loop-through output on transmitter
- SDI ancillary data support for metadata, timecode, and start/stop flags from certain camera manufacturers
- 1/4"-20, 3/8"-16, and ARRI rosette mounting points
Specifications
Construction | Milled Aluminium Chassis and Regulation-Compliant PCB |
Video Inputs | SDI: 1 x BNC (75 Ohm), 3G/HD/SD HDMI: 1 x HDMI Type A Receptacle |
Video Outputs | SDI: 1 x BNC (75 Ohm), 3G/HD/SD, Loop-Through |
Colour Sampling | SDI: YCbCr 4:2:2, 10-bit (8-Bit when Format Conversion is Enabled) HDMI: RGB 4:4:4, 8-Bit |
Latency | <0.001 Seconds (TX to RX without Format Conversion) |
Supported Resolutions | 1080p: 60/59.94/50/30/29.97/25/24/23.98 1080PsF: 30/29.97/25/24/23.98 1080i: 60/59.94/50 720p: 60/59.94/50 480i: 59.94 576i: 50 |
Video Processing | Compression Visually Lossless Colour Correction CDL/1024 1D LUT (Supports 10-Bit Colour) 33x33x33 3D LUT (Supports 10-Bit Colour) |
Audio Compression | 48 kHz, 24-bit PCM |
Audio Input | Embedded |
Interfaces | Switches: On/Off and Reset Desktop App: Feature-Rich Bolt Manager Application for OS X and Windows USB Interface Functionality: Upgrade via Mini-USB |
Wireless | Non-DFS Frequencies
|
RF Power | 17 dBm EIRP |
Encryption | AES-128 |
Range | Up to 500' / 152.4 m Line of Sight |
Unicast Multicast | Unicast / Multicast |
Noise Rejection | Can Coexist with Wi-Fi and 5 GHz Cordless Phones |
Power Input | 2-Pin Connector 7 to 17 VDC |
Power Consumption | Nominal 7.3 W (Measured at 1080p60) |
Operating Temperature | 32 to 104°F / 0 to 40°C |
Mountable | 1 x 1/4"-20 Threaded Mounting Hole 2 x M3 Threaded Mounting Holes |
Dimensions | 0.95 x 2.6 x 4.47" / 2.41 x 6.6 x 11.35 cm |
Weight | 8 oz / 226 g |
Construction | Milled aluminium Chassis and Regulation-Compliant PCB |
Video Outputs | SDI: 2 x BNC (75 Ohm), 3G/HD/SD HDMI: 1 x HDMI Type A Receptacle USB: 1 x USB Type 3.0 Micro-B Receptacle |
Colour Sampling | SDI: YCbCr 4:2:2, 10-Bit (8-Bit when Format Conversion is Enabled) HDMI: RGB 4:4:4, 8-Bit |
Latency | <0.001 Seconds (TX to RX without Format Conversion) |
Supported Resolutions | 1080p: 60/59.94/50/30/29.97/25/24/23.98 1080PsF: 30/29.97/25/24/23.98 1080i: 60/59.94/50 720p: 60/59.94/50 576p: 50 (via HDMI Only) 480p: 59.94 (via HDMI Only) 576i: 50 480i: 59.94 |
Video Processing | Compression Visually Lossless Colour Correction CDL/1024 1D LUT (Supports 10-Bit Colour) 33x33x33 3D LUT (Supports 10-Bit Colour) |
Audio Compression | 48 kHz, 24-Bit PCM |
Audio Input | Embedded |
Interfaces | Switches: On/Off and Reset Desktop App: Feature-Rich Bolt Manager Application for OS X and Windows USB Interface Functionality: Upgrade via Mini-USB |
Wireless | Non-DFS Frequencies
|
RF Power | 15 dBm EIRP |
Encryption | AES-128 |
Range | Up to 500' / 152.4 m Line of Sight |
Unicast Multicast | Unicast / Multicast |
Noise Rejection | Can Coexist with Wi-Fi and 5 GHz Cordless Phones |
Power Input | 2-Pin Connector 7 to 28 VDC |
Power Consumption | Nominal 9 W (Measured at 1080p60) |
Operating Temperature | 32 to 104°F / 0 to 40°C |
Mountable | 1 x 1/4"-20 Threaded Mounting Hole 2 x M3 Threaded Mounting Holes |
Dimensions | 6 x 3.4 x 1" / 15.24 x 8.64 x 2.54 cm |
Weight | 10.5 oz / 297.7 g |
Top Mount | 1/4"-20 Male |
Bottom Mount | 1/4"-20 Male |
Points of Articulation | 2 |
Maximum Length | 5" / 12.7 cm |
Weight | 4.8 oz / 136 g |
Compatibility | RED Swat rails Zacuto Z-rails Other 3rd party NATO products |
Dimensions | 1.9 x 1.9 x 0.7" (47.2 x 47.2 x 18.3 mm) |
Weight | 0.1 lb (50 g) |
In The Box
- Teradek Bolt 500 XT 3G-SDI/HDMI Wireless Transmitter
- Teradek Bolt 500 XT 3G-SDI/HDMI Wireless Receiver
- Wooden Camera Ultra Arm Mini Monitor Mount (1/4"-20 to 1/4"-20)
- Wooden Camera NATO Lock Kit
- SKB Case with Custom Foam (13.5 x 9.5 x 6.5")
- Teradek Vinyl Zipper Bag
- 2.5mm Hex Key
- 3/16" Hex Key
- Gold Mount Battery Plate, Factory Installed on Receiver
Reviews
(no ratings yet)Give it a quick rating:
Thanks for your rating!
Write a review
Details
- Product: Teradek Bolt 500 XT SDI/HDMI Wireless Deluxe Kit with One Transmitter, Two Receivers (Gold Mount)
- Manufacturer: Teradek
- Model: 10-1935-2G
- SKU: 10-1935-2G
- RM Product #: 68902
- Warranty: 1 year manufacturer warranty