Teradek RT ACI Module for RED DSMC2 has been discontinued, here are some related products you might like:
Teradek RT ACI Module for RED DSMC2
Features
- For RED DSMC2 Cameras
- Push Button & Jog Wheel Controls
- Redesigned, Intuitive Camera Menu
- Fully Customisable Button Layout
- Integrated LCD Display
Description
The Teradek RT ACI (Assistant Camera Interface) is a RED DSMC2 module that optimises camera control for operators and assistants on set. Modules connect seamlessly to the assistant side of DSMC2 cameras, and offer menus that make configuring settings an absolute breeze.
Controls Constantly adjusting camera settings on a touchscreen can be time-consuming, so the ACI eliminates this challenge by offering tactile push-buttons and jog wheel controls to make navigating RED DSMC2 menus incredibly easy.
Intuitive User Interface Configure start/stop, shutter speed, colour configuration and much more with a familiar, easy-to-use interface. Buttons are fully customisable to your needs.
Lightweight & Durable ACI’s machined-aluminium chassis is super lightweight, but extremely tough, allowing you to operate in the harshest conditions without concern.
Dark Mode Adjust the LED’s brightness to be ultra bright for daylight shoots and dimmer for interior/stage shoots and choose between two UI themes optimised for bright or dark environments.
*RED Approved DSMC2 Expander module with CTRL (RS232) port required.
What's In The Box:
- 1 x ACUI Top Bracket
- 1 x ACUI Bottom Bracket
- 4 x Screw Steel Nylon-Tip Set M4 x 8mm
- 4 x Screw Socket Head Cap Black Oxide M3 x 4mm
- 1 x Hex L key 2mm size 3-3/8" length
- 1 x Hex L-Key, 3 mm Size, 2-9/16" Overall Length
- 1 x Assistant Camera Interface
- 1 x USB Male Type A (Full) - USB Male Type B (Micro) -3ft Cable
- 1 x ACI Control + Power Cable
Protocol Support
- Network Protocols: RED Command Protocol (RCP)
- Camera Runstop Support: RED DSMC2 Cameras
- Full Control: RED DSMC2 Cameras
Physical Attributes
- Dimensions: 23.7mm x 79.6mm x 143.9mm (0.9" x 3.1" x 5.7")
- Weights: 250g
- Construction: Milled Aluminium(Chassis) and regulation-compliant PCB
- Mount-ability: Mount to DSMC2 bracket (included) with M4 screws.
- Operating Temperature: -20 to 50°C
Interfaces
- Configuration Interface: 13 menu function buttons and jog wheel controller
- Connectors: 1x Power & Control input
- Usb Interface Functionality: Upgrade via Micro-USB
Connectors
- Power And Camera Input Ctrl
- Power: 4-pin circular-locking connector, 7-17V DC,
- CTRL (Camera): 4-pin circular-locking connector,RS-232 for RED control
- MicroUSB: Configuration and Firmware upgrade
Power
- Power Input: 4-Pin Circular-locking connector (+11.5 to +17V DC) or DSMC2 Battery Module
- Nominal Power Consumption: 2 W
Specifications
Interface | 12 x Menu Buttons 1 x Jog Wheel |
Connectors | 1 x Power/Control 1 x Micro-USB, for Upgrades |
Operating Temperature | -4 to 122°F / -20 to 50°C |
Material of Construction | Milled Aluminium Regulation-Compliant PCB |
Dimensions | 5.7 x 3.1 x 0.9" / 143.9 x 79.6 x 23.7 mm |
Weight | 8.8 oz / 250 g |
In The Box
- Teradek RT ACI Module for RED DSMC2
- Top Bracket
- Bottom Bracket
- Nylon-Tipped, Steel M4 x 8mm Screw
- Socket Head Cap, Black Oxide M3 x 4mm Screw
- 2mm Allen Key (3 3/8")
- 3mm Allen Key (2 9/16")
- USB Type-A to USB Micro-B Cable (3')
- Power/Control Cable
Reviews
(no ratings yet)Give it a quick rating:
Thanks for your rating!
Write a review
Details
- Product: Teradek RT ACI Module for RED DSMC2
- Manufacturer: Teradek
- Model: 10-1322
- SKU: 10-1322
- RM Product #: 68954
- Warranty: 1 year manufacturer warranty