Teradek RT Single-Axis Wireless Lens Control Kit has been discontinued, here are some related products you might like:
Teradek RT Single-Axis Wireless Lens Control Kit
Features
- Latitude MDR-M Receiver
- MK3.1 Brushless Lens Motor
- CTRL.1 Wireless Lens Controller
- 5 x Extra White Marking Disks
- LP-E6 Battery with Charger
Description
The Single-Axis Lens Control Kit contains everything you need to get started with wireless lens control. It includes a single-axis CTRL.1 hand unit for precision focus pulling, a 2-channel Latitude MDR-M receiver, and a MK3.1 motor with additional accessories.
CTRL.1 The CTRL.1 is a single-axis handheld controller for precision wireless lens control. Part of the Teradek RT ecosystem, CTRL.1 allows for either focus, iris or zoom control, is compatible with all Teradek RT motors & receiver and will work simultaneously with other RT Units controlling the other axes on the same lens.
CTRL.1 introduces low-latency information overlays showing lens data on SmallHD monitors. Lens mapping and overlaying is an upgrade that can be added on at any time for an additional price. Available in metric and imperial units.
Latitude MDR-M
The Latitude M is a 2-axis receiver for focus, iris and/or zoom with an operation range of up to 1.5km. Its ultra-lightweight design allows it to mount seamlessly to any camera setup, and the built-in 2.4 GHz FHSS radio can cut through the toughest of RF conditions. Latitude M receivers also feature direct integration with RED DSMC & DSMC2 cameras for controlling EF/AF lens/iris with the camera’s internal motors, shutter, ISO, button features (2x magnification, edge, focus assist).
MK3.1 Motor
Teradek RT MK3.1 brushless motors operate smoothly and quietly, with high torque for the most demanding of modern cinematic workflows. Motors feature interchangeable gears that can be mounted on either side of the motor, and height-adjustable 15mm & 19mm rod brackets for seamless mounting on any camera system.
What's In The Box:
- 1 x Controller Neck-strap [11-1443]
- 1 x LP-E6 Duracell Battery [14-0014-1]
- 1 x LP-E6 Travel charger [14-0015]
- 1 x Receiver rod clamp [11-1439]
- 5 x Additional White discs (Type B) note: 1 white disc preinstalled on CTRL.1
- 1 x Latitude-M Receiver [15-0008]
- 1 x Lens Motor, 15/19mm rod motor bracket, 0.8 lens gear [15-0025]
- 1 x CTRL.1 Single-Axis Controller [15-0043]
- 1 x Mini-USB (5pin) to USB - 18 in Cable (Firmware) [11-1267]
- 1 x Latitude DTAP Power Cable [11-1378]
- 1 x Latitude Motor Cable 40cm Right Angle-Right Angle [11-1389]
- 1 x 6.5 ft (2m) Controller Wired Mode Cable 5-pin to 5-pin [11-1413]
- 1 x Teradek Case Large - Black with RT Motion Single Channel Controller Set Foam [28-0068-7]
Specifications
Interface - Connectors | 1 x Power-In: 2-pin LEMO 0B, 7-17 VDC 2 x Accessory In: 5-pin LEMO 0B 1 x Motor: 4-pin LEMO 0B (Use separately available breakout cable to control 2 x motors) 1 x Control (Camera): 4-pin LEMO 00B (RS-232 for RED control, serial control for LANC, programmable line driver for select cameras) 1 x USB: Mini-USB (firmware updates) |
WiFi Connectivity | 1 x 2.4 GHz WiFi module 1 x 2.4 GHz RT FHSS wireless module |
Wireless Range | RT FHSS: Line-of-sight: Up to 4921' (1500 m) (in USA/FCC mode) Indoors: Up to 492' (150 m) WiFi: Outdoors: Up to 328' (100 m) |
Operating Temperature Range | -4 to 122°F (-20 to 50°C) |
Storage Temperature Range | -40 to 185°F (-40 to 85°C) |
Dimensions | 3.9 x 1.9 x 0.9" (100 x 48 x 22 mm) |
Weight | 3.7 oz (106.3 g) |
Maximum Torque | 2.2 nm |
Dimensions | 4.5 x 1.6 x 1" (115 x 40 x 26 mm) |
Weight | 7.5 oz (212 g) |
Compatibility | Teradek RT motors and receivers |
Function | Focus, iris, or zoom |
Wireless Range | 5000' / 1.5 km |
Display | OLED |
Control Port | 5-pin motor control |
Dimensions | Not supplied by the manufacturer |
Weight | Not supplied by the manufacturer |
Dimensions | Not specified by the manufacturer |
Input Power | 100 to 240 VAC, 50 / 60 Hz, maximum 150 mA 12 to 24 VDC |
Output Voltage | 4.2 VDC, 600 mA |
Dimensions | Not specified by the manufacturer |
Weight | Not specified by the manufacturer |
Rod Clamp Type | 15/19 mm |
Mounting Screw | 1/4"-20 |
Cable Connectors | 4-Pin Hirose D-Tap |
Length | 15.7" / 40 cm |
Cable Length | 11.8" (30 cm) |
Weight | Not specified by the manufacturer |
Cable Length | 6.6' (200 cm) |
Weight | Not specified by the manufacturer |
In The Box
- Teradek RT Latitude MDR-M Receiver (1-2 Axis)
- Teradek RT MK3.1 Brushless Lens Motor
- Teradek RT CTRL.1 Single-Axis Wireless Lens Controller
- Teradek RT Controller Neck Strap
- Teradek LP-E6 Compatible 7.4V/2000mAh Battery Charger with US Plug
- Teradek RT Receiver 19/15mm Rod Clamp with 1/4"-20 Mount
- Teradek RT Latitude MDR Receiver D-Tap Power Cable (15.7", RA to Straight)
- Teradek RT Latitude MDR Motor Cable (12", RA to RA)
- Teradek RT Wired-Mode Controller Cable (6.6')
- LP-E6 Battery
- Mini-USB to USB Firmware Cable (18")
- White Marking Disk
- Large Hard-Shell Case with Custom Foam
Reviews
(no ratings yet)Give it a quick rating:
Thanks for your rating!
Write a review
Details
- Product: Teradek RT Single-Axis Wireless Lens Control Kit
- Manufacturer: Teradek
- Model: RT MDR
- SKU: 15-0045
- RM Product #: 68905
- Length Feet: 6.6 ft
- Warranty: 1 year manufacturer warranty