Tether Tools Starter Tethering Kit with USB 3.0 Micro-B Right Angle Cable (Black)
Email me when stock arrives
- Product: #56968
- SKU: BTK61BLK
The Starter Tethering Kit from Tether Tools gives you all the essential gear needed to create a secure data connection between your camera and computer. This kit comes with a black USB 3.0 cable that is equipped with a typical USB Type-A connector on one end and a USB micro-B 10-pin male connector on the other side, making it compatible with digital cameras and portable storage drives. The USB 3.0 cable is 15' long and transmits data at a rate of up to 5 Gb/s. Additionally, the USB 3.0 micro-B connector has a right-angle design that routes the cable along the device.
Tether Tools includes two JerkStoppers that remove the strain placed on the computer and camera's ports from the connecting cable and help ensure the cable stays connected. For preventing tangles, ten ProTab cable ties keep the power, video, and other types of cables well managed and organised. In addition, this kit provides a Tether Tools organisation case, so you can store the included cable, cable retention devices, and cable ties.
USB 3.0 Type-A Male to Micro-USB Right Angle Male Cable
The black USB 3.0 Type-A Male to Micro-USB Right Angle Male Cable is 4.6m long and has a right-angle design that routes the cable along the device. This cable is suitable for transferring data and providing power to digital cameras or storage drives. It features a TetherBoost Core controller that boosts and regulates the power coming from a DSLR camera or a digital back system. To reduce signal noise and transmission errors, the cable is fully shielded. Furthermore, Tether Tools has designed this cable with SuperSpeed USB 3.0 technology, so you can quickly finish the transfer job with speeds up to 5 Gb/s.
JerkStopper Camera Support
This kit will remove all the stress and strain placed on the cable or cord to ensure it stays plugged in and prevents cable or equipment damage. The patented JerkStopper cable retention device provides slack to cables in order to prevent accidental dislodging. This kit can be used with any standard A/C power adapter cord, flash sync cord, HDMI, USB or FireWire cable. It supports cable diameters from 3.5mm to 8.5mm.
JerkStopper Computer Support (USB Port)
The JerkStopper Computer Support (USB Port) allows you to create a complete tethered setup when used with a Tether Tools Camera Support (sold separately) to secure the cables of both your computer and camera. This JerkStopper Computer Support will remove all the stress and strain placed on the cable or cord to ensure that it stays plugged in and prevents cable or equipment damage.
This particular computer support model uses a spare USB port as an anchor point by allowing slack in the cord in order to prevent damage or dislodging. This kit can be used with any standard A/C power adapter cord, flash sync cord, HDMI, USB or FireWire cable. It supports cable diameters from 3.5mm to 8.5mm.
Cable Organisation Case (Standard)
The standard case design is ideal to store cables and additional accessories. If you are transporting or storing cables less than 6m this case is ideal.
JerkStopper ProTab Cable Ties
The JerkStopper ProTab Cable Ties are a 10-pack of the small-sized ties and are designed for keeping thin- to medium-gauge cables and cords such as A/C, USB, HDMI and music cables up to about 4.6m in length organised and well maintained.
|USB 3.0 Type-A Male to Micro-USB Right-Angle Male Cable (4.6m)|
|Interface||USB 3.0 (5 Gb/s)|
|Connector 1||USB Type-A Male|
|Connector 2||USB Micro-B Male|
|JerkStopper Camera Support|
|Supported||Fits cable diameters from 3.5mm to 8.5mm|
|JerkStopper Computer Support (USB Port)|
|Included||JerkStopper Computer Support (USB Port)|
|Supported||Fits cable diameters from 3.5 - 8.5mm|
|Cable Organisation Case (Standard)|
|Dimensions (W x H x D)||20.32 x 20.32 x 5.08cm|
|JerkStopper ProTab Cable Ties (Small, Set of 10)|
|Closure Type||Hook and loop|
|Dimensions (L x W)||135 x 16mm|