Other Battery Accessories

• 1 x Male D-Tap Connector Cable
• 1 x 12V Regulated, 3 x 14.8V D-Tap Ports
• Anti-Twist 1/4"-20 Mounting Threads
• Voltmeter LED Power Status Indicator
• Nylon Braided Cable Measures 16"
• Durable Aluminium Construction

Connect D-Tap Sources to Your Device D-Tap to 4-Pin XLR Female Connectivity Coiled Cable, Right-Angle Connectors Extends from 50 to 127 cm in Length

• Lithium Polymer Battery 400mAh
• Velcro Hook Tape
• Spatula Tool to Remove Battery
• Phillips Screwdriver
• SYNC E Accessories
• Access to Detailed Video Tutorial

• Holds 2 AA Batteries
• Easy Battery Exchange

• Continuously power your camera with USB-C battery packs or AC wall power
• No need to purchase multiple camera batteries
• Run two batteries simultaneously for longer runtime and no downtime
• Can be adapted for use with D-Tap batteries
• Easy mounting options with integrated silicon strap and 1/4"-20 mount

• For Select EOS R and PowerShot G Cameras
• Used to Charge Battery In-Camera
• Connects via USB Type-C Connector

• For Sony NP-FZ100-Powered Devices
• USB Type-C to Dummy Battery, 24" Cable
• Regulated 8-8.4V, 3.5A Max Output
• Transmits Status Data to Camera

• Compatible with Z 9 Camera
• For Use with EN-EL18d Battery

• For Nikon EN-EL15-Powered Devices
• USB Type-C to Dummy Battery
• Straight Cable

• Convert D-Tap Input to Multiple Outputs
• 1 x 11 to 17 VDC Male D-Tap Input
• 11 to 17 VDC D-Tap, 8 VDC Barrel Outputs
• 1 x 5V USB Type-A Output

• D-Tap Male Input
• 1 x 5V, 1.6A USB Output
• 1 x D-Tap Female Output
• 11-17V, 10A Power Input
• Compact, Lightweight Design

• 1 x Male D-Tap Connector Cable
• 1 x 12V Regulated, 3 x 14.8V D-Tap Ports
• 1 x 1/4"-20 Mounting Thread
• Nylon Braided Cable Measures 16"
• LED Power Status Indicator

• Connector option
• 12V unregulated power
• ARRI standard wiring

• Power camera using V or Gold-mount battery
• With D-Tap plug
• Regulates power

• Cable length of 508 mm
• Regulates power
• For select Nikon cameras

• Six blank panels
• Fits between power plate and camera
• Attach to rod clamp

• Replacement for power input
• 4-Pin mini XLR input

• Create custom power-output D-Box
• Five simultaneous outputs
• Max. draw of 10A

• Provides mounting points
• Stainless steel clip
• Attached to the back
• Can be used with gimbals

• Gold Mount device at the back of the V-Mount plate
• Designed with a D-Tap port on the side of the converter
• Lightweight

• V-Mount device at the back of the Gold Mount plate
• Designed with a D-Tap port on the side of the converter
• LIghtweight

• Mounts into any D-Tap Outlet
• Turns one output into four
• Works with Gripper GR 75/100 batteries

• For DeWalt 20V Max & Flex Volt Batteries
• Suitable for Powering Accessories
• Outputs Regulated 14.4 VDC at 3A
• Regulated 2-Pin LEMO, D-Tap, Coax Output
• Regulated USB Output

• 49Wh NPF-Style Battery Pack
• 14.4V, 3300mAh Capacity, 6A Draw
• For 7" Atomos Dual NPF Monitors
• 4-Stage LED Gauge
• 1 x D-Tap Output

• Battery Cover with Charging Cable Cutout
• 1/4"-20 Thread and Shoe Mount
• Metal Construction

• Lithium Ion Battery
• Original Tentacle Housing
• Instructions & Link to Video Tutorial

• Power distribution
• Standardised remote start/stop
• Hot-swap abilities
• For Canon C300 Mark II

• 26V V-Mount Battery.
• 150Wh Capacity.
• Up to 2.4 Hours with 0.3m x 0.3m Flex Mat.
• Intelligent IC Circuit Control.
• LED Battery Gauge.

• For Canon LP-E6-Powered Devices
• USB Type-C to Dummy Battery
• Straight Cable

• For Panasonic DMW-DCC-Powered Devices
• USB Type-C to Dummy Battery
• Straight Cable

• Compatible with D4, D4S, and D5 Cameras
• For Use with EN-EL18/a Battery

• Connector option
• For D-Box
• 24V regulated power
• 1A ARRI standard wiring

• Connector option
• For Wooden Camera D-Box
• 12V unregulated power
• 4-Pin LEMO compatible

• 3 D-Tap Outputs
• 10A Max Draw