(no ratings yet) Thanks for your rating!
Zacuto Gorilla Plate V2Product #12599 | SKU Z-GRPV2 |(no ratings yet) Thanks for your rating!
- Camera Plate for Small Cameras
- For Z-Finder Mounting Frames
- Rubberised Top Surface
- 1/4"-20 Captive Camera Mounting Screw
- 3 x 1/4"-20 Threaded Mounting Holes
The Zacuto Gorilla Plate V2 is a small camera mounting plate for small DSLR and mirrorless cameras. The plate provides mounting points for available Z-Finder mounting frames allowing you to attach a Zacuto Z-Finder to a camera such as the Panasonic GH3. Additional frame options allows the Z-Finder to be attached to a variety of DSLR cameras. The Gorilla plate features a rubberised top to provide good grip and prevent the camera from twisting on the plate. The 1/4"-20 camera mounting screw is captive, so you don't have to worry about it falling out when you remove the camera.
The Gorilla Plate V2 also features three 1/4"-20 threaded mounting holes for attaching it to a tripod or QR plate. The tripod mounting holes are off centre, and if you need a centred tripod mounting hole, for use with some support rigs and matteboxes, you will need to purchase an available Zacuto Gorilla Plate Adapter. The Gorilla Plate V2 incorporates a vertical 15mm diameter rod port that can be used to clamp onto a 15mm rod, for use with various available camera support systems that feature a 15mm diameter vertical camera support rod. The clamping lever is ratcheting style, so you can fully tighten or loosen the clamp even when you can't completely rotate the knob.
- The camera plate is made from anodised aluminium so that it is lightweight and corrosion resistant.
- The rubberised top surface of the plate provides a a good grip to help prevent the camera from rotating while mounted to the Gorilla Plate.
- The Gorilla Plate V2 allows you to mount an available Z-Finder to DSLR and other small cameras by providing attachment holes for interchangeable Z-Finder Frames.
- The 15mm rod port allows you to mount the Gorilla Plate V2 to available camera support systems that use a 15mm vertical rod for the camera riser, such as the Zacuto Striker and Target Shooter.
|Material of Construction||Anodised aluminium
Rubberised top plate
|Camera Mounting Screw||1 x Captive 1/4"-20 Screw|
|Tripod Mounting Thread||3 x 1/4"-20 threaded mounting holes
1 x Slot for available Gorilla Plate Mount Adapter
|Accessory Mounting||2 x 1/4"-20 mounting holes for attaching an available Z-Finder Mounting Frame Slide Kit, for attaching oprional Z-Finder Frames|
|Dimensions (L x W x D)||7.6 x 5.7 x 1.9 cm
Note: not including the QR lever clamp
In The Box
- Zacuto Gorilla Plate V2
- 1/4"-20 Captive Camera Tie Down Screw
- Limited 1-Year Warranty