Camera Rigs & Support

• Mount a V-Mount Battery on 15mm Rods
• Lightweight Aluminium V-Lock Plate
• Adjustable Extension Arm, 15mm Rod Clamp
• 1/4"-20, M3, M4 & ARRI-Style Threads
• Quick Release Locking Mount

• Mounts SSD on SmallRig 3270 Camera Cage
• Compatible with Samsung T5 & T7 SSD
• Spring-Loaded Clamp Secures SSD in Place
• 1/4" Thread & Shoe Mount
• Built-In USB Type-C Cable Clamp

• Built-in Arca-type quick release plate
• Detachable anti-twist lock for stability
• 1/4"-20 threads, ARRI 3/8" -16 locating holes
• Multiple cold shoe mounts
• Built-In ergonomic hand grip

• For Rosette-Mounted EVFs
• Attaches via 15mm Rod Port
• Four 360°-Pivoting Points
• Independent Tension Adjustment

• Offers comfortable run-and-gun shooting experience
• Flexible and compatible with both big and small cameras
• Features memory foam
• Weights only 302g in total
• Could provide more mounting options

• Fits Magic Carpet Short or Long Tracks
• Brake and Bubble Level on Carraige
• 3/8"-16 and 1/4"-20 Reversible Screw
• Adjustable Quick Release Legs
• Genie Rope Lock Off Hooks

• Ergonomic silicone shoulder pad
• Built-in VCT-14 quick-release baseplate
• Top quick-release plate
• Adjustable extension arm
• Ergonomic handle surface

• Shoe Adapter Mount
• 2kg Maximum Payload
• Tilts 170-Degrees
• Locks in Any Position with Allen Wrench
• Durable Aluminium Construction

• Track and film effortlessly in real-time
• Contains PIXIO device, beacons, and tracking watch
• Advanced motion capture device
• Film without a camera operator
• Track up to 16 people simultaneously

• Reduces arm stress and increases stability during handheld shooting.
• Rotating structure adjustable by 150°
• Easy and quick operation with one knob to lock the integrated rod clamp.

• Motorised Camera Platform
• Keyframing for Complex Tracking Shots
• Reduced Friction on Rope Drive
• Integrates with Genie II Pan/Tilt Head
• Compatible with Third-Party Sliders

• Mounting Screws for Camera Cages, Handles, Plates
• Full Kit of 26 Screws.
• Socket Cap & Slotted & Phillips Screw
• Includes 1/4”, 3/8”, M2, M2.5, M3, M4 Screws

• Compatible with 12mm and 15mm Rods
• Screw and Locating Pin Prevent Deflection
• Locks via Knob Screw for Easy Assembly/Disassembly

• Ergonomically Designed
• 5 Built-In Cold Shoe Mounts

• Extends FX3 XLR Handle
• Provides More Comfortable Grip
• Top NATO Rail, Rear Shoe Mount
• 1/4"-20 & ARRI-Style Threads
• Durable Aluminium Handle

• Attach Mic, Light, Phone Clamp to Stand
• 3 Joints with 360° Adjustable Rotation
• 180° Adjustable Tilt
• Large Clamping Range from 15 to 35mm
• 3/8" Thread for Microphone Mount

• Styled in a vintage heavy metal fashion
• Metallic rust and leather brown
• Shutter button adapter enhances shutter control
• Hot shoe cover with a bubble level

• Attaches Two HeadONE Units Together
• Enables Both Pan and Tilt Motion
• 7 lb Capacity

• Foldable & Compact
• Innovative Folding & Quick Release Design
• Lightweight & Portable
• Suitable for Left & Right Hand

• Adjustable Accessory Cold Shoe Mount
• Connects to Standard 1/4"-20 Screw

• Arca-Swiss type bottom plate and side plate
• Features an Arca Swiss quick-release plate
• Comes with a stretchable side plate
• gives full access to ports and cables
• Built-in magnetic wrench

• Built-in 15mm rod clamps
• Strong compatibility
• Anti-false-touch design
• Compatible with DJI RS series
• Modular design

• For the Edelkrone JibONE
• Protects Against Dust/Scratches/Impacts
• 2 x Interior Accessory Compartments
• Adjustable Shoulder Strap
• Built-In Hand Strap

Provides Stop-Motion Capability, Supports Shoot-Move-Shoot, Integrated Focus Adjustment Knob, Supports Dragonframe Software, USB Power

• Attaches With or Without Camera Handle
• 1/4"-20 Threads & ARRI Accessory Mounts
• NATO Rail (Zacuto Z-Rail)
• 2 x 15mm Rod Blocks (Can Be Mounted LWS)

• Formfitting Camera Cage for Sony a7S III
• Maintains Access to Camera's Hot Shoe
• 1/4"-20 & 3/8"-16 Accessory Threads
• ARRI-Style Accessory Threads, NATO Rail
• Built-In Shoe Mount, Anti-Twist Design

• 3 x Cold Shoe Accessory Mounts
• 1" Extension Arm with 1/4"-20 Screws
• Mounts via Cold Shoe or 1/4"-20 Thread
• Knurled Thumbwheels

• Minimalist Cable Management Device for Filmmakers
• Anchors Into 3/8"-16 Threaded Holes
• Strong and Flexible Material
• Fast Installation and Secure Hold

• Ergonomically Designed

• Minimalist Cable Management Device for Filmmakers
• Anchors Into 3/8"-16 Threaded Holes
• Strong and Flexible Material
• Fast Installation and Secure Hold

• For Lenses with 25 to 110mm Diameter
• Standard 0.8 Mod / 32 Pitch Gearing
• Works with Most Follow Focuses

• Fits DJI RS 2/RSC 2 Handheld Gimbal
• Add Comfort & Stability, Reduce Fatigue
• 1/4"-20 & 3/8"-16 Accessory Threads
• NATO Rails & Shoe Mounts
• NATO Clamps Instal on Gimbal Handle

• 2 kg Load Capacity
• Mounts Monitors and Lights to DSLR
• 90º Vertical Articulation
• Single Adjustment Knob
• 1/4"-20 Screw on Top

• Wear-resistant, scratch proof tempered glass film.
• Anti-Shock: IK03 standard.
• 5D arc-rounded edges.
• 4mm touch-accurate control.
• Electrostatic nano-adsorption.

• Mounting solution for ARRI and NATO accessories
• QR system
• NATO standard
• M6 center opening
• Right/left handle adjustment

• Minimalist Cable Management Device for Filmmakers
• Anchors Into 3/8"-16 Threaded Holes
• Strong and Flexible Material
• Fast Installation and Secure Hold

• For Mounting Camera Accessories
• Mount 19mm accessories

• Compact and Versatile Run-N-Gun Rig.
• Tool-Free Adjustment for Fast Transition Between Modes.
• Weighs <1.8kg, Fits in/on Most Full-Size Camera Backpacks.
• Video Plate Compatible with Most Manfrotto Video Heads.

• Minimalist Cable Management Device for Filmmakers
• Anchors Into 3/8"-16 Threaded Holes
• Strong and Flexible Material
• Fast Installation and Secure Hold

• Shoulder Pad for ENG/Doc-Style Shooting
• VCT Wedge Compatible Quick-Release
• 15mm LWS Rod Clamps
• Accessory Rosettes on Both Sides
• Includes Top Handle

• Formfitting Camera Cage
• 1/4"-20 Accessory Threads
• 1/4"-20 & 3/8"-16 Tripod Mount Threads
• Open Access to Controls, Slots & Ports
• Strap Slot, Rubber Padding

• Wi-Fi and Bluetooth Camera Remote
• Camera Control from Syrp App
• Ramp Exposure During Time Lapse
• Control ISO, Aperture & Shutter Speed
• HDR Mode for Time-Lapse Sequences

• Slider Track for Magic Carpet System
• For Use with Carriage & End Caps
• Supports Loads up to 7 kg

• Track and film effortlessly in real-time
• Advanced motion capture device
• Film without a camera operator
• Track up to 16 people simultaneously

• Included flat mount and angle mount
• Screws for securing mounts to camera
• Mic holder features rubber o-ring bands

• Mounts via ARRI-Style Anti-Twist Screw
• 3 x Shoe Mounts, 1 x 15mm Rod Clamp
• 1/4 and "3/8" Accessory Threads
• Aluminium & Stainless Steel Construction

• ARRI 3/8-16 Locating Hole
• Cold Shoe Mount
• Arca-Swiss QR Plate
• 3/8-16 Threaded Holes
• NATO Rail, Strap Slots
• 1/4-20 Threaded Hole

• Formfitting Camera Cage for Canon R5/R6
• Top Handle, HDMI/USB Cable Clamp
• Maintains Access to Ports & Controls
• 1/4"-20 & 3/8"-16 Accessory Threads
• Shoe Mount, Integrated Arca-Type Base

• Features multi-model electronically controlled REC function
• Compatible with Sony, Panasonic, Fujifilm, Z Cam
• Ergonomically designed to improve grip experience
• Made of high-quality wood, secured with ARRI rosette

• Female HDMI Type A on One End
• Male Mini-HDMI Type D on Other End
• 2 x 1/4"-20 Threads on Female End
• Ultra-Slim Cable for up to 4K60 Video
• Cable Measures 14cm in Length

• Protects camera without blocking any ports
• Two-point locks the camera via one 1/4"-20 screw
• Features multiple mounting points
• Built-in Arca Swiss quick-release plate

• Full Cage for Sony a7R IV Camera
• HDMI Cable Clamp
• Side Handle with 1/4"-20 Mounting Screws
• Multiple Accessory Threads and Mounts
• Maintains Open Access to Camera Ports

• Full Cage for BMPCC 6K or 4K Camera
• 1/4"-20, 3/8"16 & ARRI Accessory Threads
• Maintains Access to Camera Controls
• Integrated Shoe Mount, NATO Rails
• Locating Pins & Rubber Pads

• Formfitting Cage with NATO Rails
• Top Handle with Start/Stop Control
• Top/Front & Left/Right NATO Safety Rails
• Modular Cage Design
• 1/4"-20 & 3/8"-16 ARRI Accessory Threads

• Bottom 1/4"-20 Screw
• 1x M2 Screw on Both Sides
• Built-In Grip
• Full Access to Buttons, Card Slots, Screen, & Battery Door
• Various Accessory Mounts

• Arca-compatible side plate and base plate enable quick switch between horizontal and vertical orientation shooting;
• Secured via a 1/4 screw and an anti-twist screw at the bottom;
• Replace the battery without removing the L-Bracket;
• Extendable side plate leaves room for cables;
• Built-in mounting ports, such as 1/4"-20, 3/8"-16 threaded holes, wrist strap holes, satisfy multi-scene shooting;
• Does not block ports, buttons, card slot, battery door, and 4-axis tilting LCD screen

• Arca-Swiss quick-release bottom plate and side plate
• Hinged arm at the battery door
• Arca-Swiss quick-release plate supports Arca-type tripods or DJI RS 2 / RSC 2 / RS 3 / RS 3 Pro gimbals
• Multiple mounting points
• A stretchable side plate allows cables through in vertical shooting

• Full cage that protects Sony FX30 / FX3
• Modular design with removable NATO rail
• Dedicated HDMI cable clamp
• 1/4"-20 threaded holes, ARRI 3/8"-16 locating holes
• Arca-Swiss quick release plate

• Dedicated tripod and LED light Vlog kit for Sony ZV-E10
• Integrate Arca-Swiss plate, cold shoe, and 1/4"-20 threads
• Arca-type tripod for quick disassembly and assembly
• Portable mini LED light with four brightness levels

• Dedicated Arca-type L-Bracket for Fujifilm GFX 100S
• Fits Arca-type tripod heads for vertical and horizontal shooting
• Sliding side plate for easy connecting of cables
• Built-in flat-head screwdriver for easy access
• Multiple 1/4''-20 threaded holes & strap slot

• Ergonomic design, comfortable grip experience
• Adjustable to different cage height
• Quick switch from left to the right side
• Additional mounting options
• Lightweight and portable design

• Dedicated pro kit for SONY FX6
• Features two top plates that suit the original handle
• ARRI baseplate allows quick adjustment based on the center of gravity of camera
• Manfrotto quick release plate on the top of the baseplate that enables switch between tripod and handheld mode

• Dedicated full cage for Nikon Z9.
• 1/4''-20 holes, ARRI 3/8"-16 holes, cold shoe mounts.
• Built-in Arca Swiss plate allows the quick switch to tripod shooting.
• All-around protective rubber pads to prevent scratches.

• For Select Stabilizers and Sliders
• Drives the Slide Motion
• Powers Head & Focus Modules
• Standalone Operation

• Dedicated retro grip for Nikon Z fc
• Built-in Arca Swiss plate
• Features 1/4"-20 threaded hole in grip
• Built-in cold shoe mount

• Short Track for Magic Carpet System
• Lightweight Carbon Fiber Construction
• Use with Carriage & End Caps
• Supports Loads up to 5 kg
• Compatible with Original MC Components

• Two 5/8’’ (16mm) baby receivers
• 1/4’’ & 3/8’’ female threads

• Formfitting Aluminium Camera Cage
• Open Access to Controls and Ports
• Ergonomic Right-Side Grip, Shoe Mount
• Integrated Arca-Type Base, NATO Rail
• 1/4"-20 and 3/8"-16 Accessory Threads

• For Panasonic AU-EVA1 Cinema Camera
• Ratchet Knob System
• Push Button Technology

• All-In-One Form-Fitting Full Cage Protects Camera
• 1/4''-20 & ARRI 3/8" -16 Holes, Cold Shoe, NATO Rail & More
• Anti-Twist Two-Point Locking Design
• Built-In Arca-Swiss Quick Release Plate
• Built-In Magnetic Spanner for Easy Access

• Full Cover Fit
• Magnetic Hex Key Storage Compartment

• Stabilise Your Phone for Video Capture

• Arca-Swiss Quick Release Plate
• Battery Door Hinge Arm
• Side Plate Cold Shoe Mount
• Strap Slots for Hand Strap
• Bulit-In Screwdriver

• 2 Spring loaded alignment pins
• Horizontal rotation 360 degree
• Front-Back rotation 180 degree
• Bearing 3kgs

• For Use with Magnalink Mounting Plate
• Attaches Plate to CineDrive Slider Motor
• Screws and Hex Key Included

• Extension Track for Magic Carpet System
• Lightweight Carbon Fibre Construction
• Use with Carriage & End Caps
• Supports Loads up to 11 lb
• Compatible with Original MC Components

• Arri standard accessory mount.
• Arri locating pins.

• Converts to a rosette mount
• Use with Axis Mini and EVF Mount

• Links Your Camera to the Syrp Genie
• For Motion Control & Time-Lapse Videos
• Length: 40 cm Coiled & 70 cm Stretched

• NATO Standard Rail
• For Mounting NATO-Compatible Accessories
• Spring-Loaded Safety Stops on Each End

• Mounting: 1x1/4" + safety pin
• One piece of aluminium
• Form-fitted
• Solid clamp

• Attaches to Sony VCT-U14 Tripod Adapter
• Height-adjustable 15mm rods adapter
• Adjustable shoulder pad

• Form-Fitted Half Cage.
• CNC Machined Aluminium.
• 1/4"-20, 3/8"-16 & M4 Mounting Holes.
• Prevents Camera from Twisting.

• For 8Sinn Sony a7III / a7RIII/ a7SIII/ A1 Cages

• The cap serves to close the rod opening.
• Prevents from unwanted contents inside the rods.
• Having this Cap makes inserting the rod into the rod slot much easier.
• Material: stainless steel.

• Infinitely Extendable
• Extreme Portability + Lightweight
• Motion Control Ready
• Vertical Operation
• Seamlessly Join

• Powerful IR Emitter for Camera Control
• 315 mm Long Flexible Cable
• For Most Cameras with Infrared Receiver

• Formfitting Full Cage for Sony ZV1 Camera
• Allows Access to Battery & Memory Card Door
• Ergonomic Side Handle Provides Comfort
• Integrated Cold Shoe & 1/4"-20 Accessory Mounts
• Compatible with Cable Clamp 1693

• Protective, Open-Style Camera Cage
• Keeps Camera Handgrip Accessible
• 1/4"-20 & 3/8"-16 Accessory Threads
• Right-Angle HDMI Adapter & HDMI Clamp
• ARRI-Style Anti-Twist Locating Holes

• Robust and durable
• All-inclusive protection
• Three-point locking system
• Multiple mounting interfaces
• Built-in Arca-Swiss quick-release plate
• One-touch release cable clamp

• Aluminium Alloy
• Press and Flip Design
• Protects HDMI & USB-C Cables Ports
• Attaches to Cage via two M3 Screws

• Mounts Converter on Cage or Rig
• Clamp & Thumbscrew Secures Unit in Place
• 1/4"-20 Screws Mount Holder onto Cage
• Rubber Padding Prevents Scratches
• 360° Rotation

• 0.8 MOD Gear for Cine Follow Focuses.
• 75 to 77mm Diameter for Focus/Zoom.
• Fully Closed and Requires No Screws.
• Even Pressure, No Drifting, Accurate.

• For Select SmallRig Phone Cages
• Achieve More Professional Results
• 3 x 1/4" Threaded Holes for Accessories
• Built-In Wrench
• Anti-Slip Rubber Surface Pads

• Handheld cage kit for Sony FX30 / FX3
• XLR handle extension for improved grip
• Dedicated HDMI cable clamp
• 1/4"-20 threaded holes, ARRI 3/8"-16 locating holes
• Arca-Swiss quick release plate