Follow Focus
Tilta FF-T07 Pocket Follow Focus
- Mounts on 15mm Rod
- 0.8 MOD Gear Included
- Removable Marking Disk
- Includes Hard-Shell Case
In stock
Ships tomorrow
You Pay:
$119.00
SmallRig 3850 F60 Follow Focus
- New material and fine-tuning ability
- Adjustable non-stop damping feels comfortable
- 3-step switch to reverse rotation
- Modular design with high compatibility
- Detachable palm support for shooting stability
- Friction-driven lenses, streamlined mounting
In stock
Ships tomorrow
You Pay:
$269.00
Tilta Nucleus-M Follow Focus Marking Disk (Set of 4)
- For Marking Focus Distances
- Fits Nucleus-M FIZ Hand Unit
- 4 x Plastic Marking Disks
In stock
Ships tomorrow
You Pay:
$48.95
edelkrone FocusPLUS PRO Focus Motor
- Brushless Lens Motor
- For Hard-Stop & Infinity Lenses
- Standard 0.8 MOD Cine Gear
- Works with HeadPLUS/HeadPLUS PRO v1 & v2
- Ultra Hi-Res Encoder
In stock
Ships tomorrow
You Pay:
$1,229.00
Wooden Camera Zip Focus Single-Rod Follow Focus (19/15mm Studio)
- Pivots and Adjusts to Fit Most Lenses
- 1:1 Gear Ratio
- 0.8 MOD and Friction Drive Gears
- Includes 2 Standard Marking Disks
- Hard-Stop Disk for DSLR Lenses
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$995.00
SmallRig MagicFIZ Wireless Follow Focus Two-Motor Kit
- Electronic Controller Module & 2 Motors
- Handgrip & Adapter, Handwheel Controller
- 15mm Rod Clamp, 15mm Rod, NATO Rail
- Follow Focus Gear Ring, USB-C Cable
- 2 L-Series Battery Plates, Carry Bag
- Shoulder Rig & Monitor Adapters
Usually ships in 3 - 4 weeks
You Pay:
$1,099.00
SmallRig 4151 Rod Clamp
- Easily installed and released from upwards
- Adjustable rod distance for left and right
In Stock with Supplier
Usually ships in 2 - 4 weeks
You Pay:
$73.95
SmallRig 3852 Silicone Gear
- Compatible with 3010 series follow focus
- Incompatible with gears of other modules
In stock
Ships tomorrow
$23.95
You Pay:
$17.95
$23.95
Tilta Seamless Focus Gear Ring (46.5 to 48.5mm)
- 0.8 MOD Gear for Cine Follow Focuses
- 46.5 to 48.5mm Diameter for Focus/Zoom
- Fully Closed and Requires No Screws
- Even Pressure, No Drifting, Accurate
Usually ships in 2 - 4 weeks
You Pay:
$6.95
edelkrone FocusONE v2 Follow Focus
- Manual Follow Focus for 15mm & 19mm Rods
- Movable Body Design—Use on Either Side of Camera
- Smooth & Backlash-Free Operation
- Ultra-Precise & Pen-Free Focus Marking
- Custom Focus Wheel Sensitivity
In stock
Ships tomorrow
You Pay:
$409.00
Lanparte Gear Ring for Follow Focus
Rubber gear with a standard pitch of 0.8 and maximum diameter of 4.1"
In stock
Ships tomorrow
You Pay:
$53.95
Accsoon F-C01 Follow Focus System
- Wireless Follow Focus/Zoom Controller
- Focus Wheel, Motor & 15mm Rod Mount
- Control from 100m Away
- 8-Hour Battery Life
- 0.8 MOD Gear, Wired Connection Option
In stock
Ships tomorrow
$399.00
You Pay:
$369.00
$399.00
Tilta FF-T03 15mm Follow Focus with hard stops
- For 15mm Rod Support Systems
- 2 x Hard Stops
- Adjustable Tension Control
- Anodised Aluminium Alloy Construction
In stock
Ships tomorrow
You Pay:
$1,079.00
Samyang Cine Kit Follow Focus System
- Ergonomic Design with Independent Modules
- Easy and Precise Control
- Quick Assembly
In stock
Ships in 1 - 2 working days
You Pay:
$639.00
You Pay:
$60.95
Tilta Nucleus-M Follow Focus Marking Disk
For Marking Focus Distances, Fits Nucleus-M FIZ Hand Unit
In stock
Ships tomorrow
You Pay:
$13.95
Portkeys 5-Pin BM5 to 7-Pin Control Cable for Tilta Nucleus-M
- Control Focus Motor Using BM5 Monitor
- 7-Pin End for Nucleus-M
- 5-Pin Connector for BM5 Monitor
- Cable Measures 40 cm in Length
In stock
Ships tomorrow
$75.95
You Pay:
$56.00
$75.95
Portkeys 5-Pin BM5 to Micro-USB Control Cable for Tilta Nucleus-Nano
- Control Focus Motor Using BM5 Monitor
- Micro-USB End for Nucleus-Nano
- 5-Pin Connector for BM5 Monitor
- Cable Measures 40 cm in Length
In stock
Ships tomorrow
$48.95
You Pay:
$36.00
$48.95
SmallRig 0.8 MOD/38 Teeth Gear for Mini Follow Focus
- Compatible with Mini Follow Focus 3010
- Standard 0.8 MOD Gear, 38 Teeth
- Works with 0.8 MOD Lenses or Gear Rings
- ABS Plastic Construction
In stock
Ships tomorrow
$26.95
You Pay:
$19.00
$26.95
SmallRig 4091 Follow Focus Marking Disk (Wooden)
- Ergonomically Designed
- Ebony Wood Feels Comfortable
In stock
Ships tomorrow
$44.95
You Pay:
$26.00
$44.95
Wooden Camera Zip Focus Single-Rod Follow Focus (15mm LWS)
- Pivots and Adjusts to Fit Most Lenses
- 1:1 Gear Ratio
- 0.8 MOD and Friction Drive Gears
- Includes 2 Standard Marking Disks
- Hard-Stop Disk for DSLR Lenses
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$995.00
Tilta FF-T04 Dual Follow Focus
- Mounts on 19mm and 15mm LWS Support Rods
- Internal Belt Drive Sytem
- Operator and Assistant Hand Wheels
- Drive Extension for Clearing Matte Box
- Integrated Index Mark
Usually ships in 2 - 4 weeks
You Pay:
$2,313.00
Tilta Tiltaing Right-Side Advanced Focus Handle Type V (F570, Black)
- For Tiltaing Cages via Optional Mount
- Nucleus-Nano Focus Control
- Compatible Camera Run/Stop Control
- Fingerwheel and Record Button
- NP-F570 L-Series Battery Support
Usually ships in 2 - 4 weeks
You Pay:
$469.00
SmallRig Ronin-S And Ronin-SC Discover- Follow Focus Component
- Work with SmallRig RS 2 Quick Release Plate 3031.
- Attach focus motor to RS 2 gimbal.
- Compatible with DJI RS 2 focus rod mount, allowing for follow focus and zoom together.
- Locks via thumbscrew which is secure and fast.
Usually ships in 3 - 4 weeks
You Pay:
$47.95
Tilta 300mm Follow Focus Whip
- For Tilta Follow Focus Units
- Attaches to Accessory Socket
- Flexible Cable Attachment
Usually ships in 2 - 4 weeks
You Pay:
$137.00
Tilta Hard-Shell Case for Dual-Sided Cine Follow Focus
- Fits Dual-Sided Cine Follow Focus
- Hard-Shell Carrying Case
- Large Top Handle Folds for Storage
- Dual Padlock Holders
Usually ships in 2 - 4 weeks
You Pay:
$199.00
Zacuto Z-DR-AD Z-Drive Height Adjuster
- For Z-Drive Follow Focus
- Accommodates different lens barrel sizes
- Made from anodised aluminium
Usually ships in 4 - 8 weeks
You Pay:
$139.00
SHAPE Follow Focus Pro Full Kit
- Dual-Sided Focus Control
- Snap-On 15 mm Rod Attachment
- Adjustable Gear Arm
- Two 0.8 Pitch Gears: 28 Teeth & 43 Teeth
- Adjustable Hard Stops
Usually ships in 4 - 6 weeks
You Pay:
$3,349.00
SHAPE Follow Focus Friction and Gear Click + Riser Rail Kit
- FF Adjusts Horizontally & Vertically
- Friction & 0.8-Pitch Geared Wheels
- Base Adds 2"(5.08 cm) to Camera Height
- Includes Pair of 8"(20 cm) 15 mm Rods
- Right or Left Side Mountable
Usually ships in 4 - 6 weeks
You Pay:
$1,149.00
SHAPE 0.8 Pitch Aluminum Gear for Follow Focus Friction and Gear Clic
- Used with Cine Lenses & Lens Gears
- Compatible with Lens Gear Kit (0.8 Pitch)
- Included with Follow Focus Friction and Gear Clic (FFCLIC) Follow Focus
- Constructed from Aluminium for Durability
Special Order
Usually ships in 3 - 4 weeks
You Pay:
$94.95
SHAPE Follow Focus Pro
- Snap-On 15 mm Rod Attachment
- Adjustable Gear Arm
- Two 0.8 Pitch Gears: 28 Teeth & 43 Teeth
- Adjustable Hard Stops
- Removable Marking Disc
Usually ships in 4 - 6 weeks
You Pay:
$2,299.00
SHAPE Friction & Gear Follow-Focus Clic with Adjustable Marker
- Attaches to Standard 15 mm Rods via Clamp
- Focus-Adjusting Rubber Friction Wheel
- Focus-Adjusting .8 Pitch Gear Wheel
- Can Be Used on Either Side of a Lens
- Adjustable Focus Disk for Various Lenses
Usually ships in 4 - 6 weeks
You Pay:
$919.00
SHAPE Lightweight Matte Box & Follow Focus Kit for Panasonic GH6
- Formfitting Cage for Panasonic GH6
- 15mm LWS Rod Baseplate System
- Unobstructed Camera Function and Access
- Follow Focus Wheel with Crank and Whip
- Single 15mm Rod Clamp, Swing Arm Design
- 5 Drive Gears Included, 1:1 Gear Ratio
Usually ships in 4 - 6 weeks
You Pay:
$2,199.00
SHAPE Lightweight Matte Box & Follow Focus Kit for Canon EOS R5 C, R5 & R6
- Formfitting Cage for Canon R5 C/R5/R6
- 15mm LWS Rod Baseplate System
- Unobstructed Camera Function and Access
- Follow Focus Wheel with Crank and Whip
- Single 15mm Rod Clamp, Swing Arm Design
- 5 Drive Gears Included, 1:1 Gear Ratio
Usually ships in 4 - 6 weeks
You Pay:
$2,199.00
SHAPE 0.8 Pitch 28 Teeth Aluminum Gear for Follow Focus Pro
- 0.8 Pitch Gear with 28 Teeth
- Aluminium Construction
Special Order
Usually ships in 3 - 4 weeks
You Pay:
$63.95
SHAPE Marking Disc for Friction/Gear Clic Follow Focus
- Place Markings for Pulling Focus.
- Suitable for Dry Erase Markers.
- For Friction/Clic Follow Focus.
Special Order
Usually ships in 3 - 4 weeks
You Pay:
$49.95
SHAPE Marking Disc for Follow Focus Pro
- Place Markings for Pulling Focus.
- Use with Dry Erase Markers.
- Replacement or Additional Marking Disc.
Special Order
Usually ships in 3 - 4 weeks
You Pay:
$59.95
SHAPE 0.8 Pitch 43 Teeth Aluminium Gear for Follow Focus Pro
- 0.8 Pitch Gear with 43 Teeth.
- Aluminium Construction.
Special Order
Usually ships in 3 - 4 weeks
You Pay:
$109.00
SHAPE Kit Focus Single Rod Follow Focus 15mm LWS
Single Rod Follow Focus kit
Usually ships in 4 - 6 weeks
You Pay:
$1,029.00
Lanparte Action Camera Clamp for LA3D & LA3D-2 Handheld Gimbals
Available to order today
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$41.95
Lanparte 0.8 MOD 43 Tooth Drive Gear for FF-01/FF-02 Follow Focus
Drive Standard Cine Lenses
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$47.95
Lanparte 0.8 MOD 36 Tooth Drive Gear for FF-01/FF-02 Follow Focus
Drive Standard Cine Lenses
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$47.95
Lanparte 0.7 MOD 49 Tooth Drive Gear for FF-01/FF-02 Follow Focus
Drive 0.7 MOD Lens Gears
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$47.95
Lanparte 0.6 MOD 58 Tooth Drive Gear for FF-01/FF-02 Follow Focus
Drive Compatible Fujinon ENG Lenses
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$41.95
Lanparte Extension Arm for Follow Focus
Increases height of follow focus, Adjustable gear angle, CNC machined
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$229.00
Lanparte 0.5 Pitch Gear Mod for FF-01 / FF-02 Follow Focus Units (70 Teeth)
Replacement 0.5 mod gear featuring 70 teeth
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$47.95
Lanparte Speed Crank for Follow Focus
Enables faster focus pulling
In Stock with Supplier
Usually ships in 4 - 6 working days
You Pay:
$62.95
Lanparte Follow Focus V2 with Hard Stops for 15mm Rods
Allows you to smoothly pull focus with cinema and DSLR lenses
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$919.00
Tilta Marking Disk For FF-T05 Follow Focus
- Snaps onto Follow Focus Unit
- Indent Prevents Disk from Shifting
Usually ships in 2 - 4 weeks
You Pay:
$20.95
Tilta Follow Focus Lens Drive Gear for FF-T05 6mm 0.8 MOD, 64-Tooth
- 0.8 MOD, 64-Tooth
- For Tilta Single-Sided Cine Follow Focus
- Drives Cine-Style ENG Lenses
Usually ships in 2 - 4 weeks
You Pay:
$41.95