(no ratings yet) Thanks for your rating!
SmallHD FOCUS SDI Monitor Gimbal KitProduct #52513 | SKU MON-FOCUS-SDI-GIMBAL-KIT |(no ratings yet) Thanks for your rating!
- 5" FOCUS SDI Onboard Monitor
- Gimbal Shoe Clamp
- 24 & 48" Thin BNC (SDI) Cables
- 1 x L-Series Type Battery & Charger
- FOCUS Tilt Arm
Built around the bright, 5" FOCUS SDI monitor, the FOCUS SDI Monitor Gimbal Kit from SmallHD features a selection of accessories geared for using the monitor with a gimbal rig. A gimbal shoe clamp and a Tilt Arm are used in mounting the FOCUS SDI to your rig. One L-series type battery and charger, micro-USB cable, and one each 24 and 48" thin BNC cables are included. A sun shade, screen protector, cleaning cloth, and a set of four cable clips also come with this kit.
The SmallHD FOCUS SDI Monitor Kit provides a compact, professional SDI monitoring option suitable for use with DSLR and mirrorless cameras. This bright, lightweight onboard monitor features a sharp display that is viewable even in full daylight. The 800 cd/m² bright touchscreen 1280 x 720 IPS LCD panel is fed by a single 3G/HD/SD-SDI (BNC) input, and is crisp enough for pulling focus. Powered by a single Sony L-series type battery, this versatile monitor can also supply power to your camera when used with a separately available adapter cable for your camera.
Use the intuitive Swipe OS to turn on various monitoring tools like waveform, false colour, and vectorscope, as well as focusing aids like peaking. A Tilt Arm is included with the monitor for mounting to your camera's accessory shoe or 1/4"-20 threaded hole. Additional features include a 3.5mm stereo headphone jack and a low 5W power draw.
At only 2.75mm in diameter this Thin BNC Cable from SmallHD will snake around nearly any component you have in your rig, perfect for use in compact camera setups with an EVF or on-camera monitor which uses SDI.
Full-Sized SDI Input
A full-sized SDI (BNC) connector is used to display your camera's 3G/HD/SD-SD video signal.
An output port enables you to power your camera directly from an NP-F battery mounted on the monitor, increasing runtimes over the standard batteries of many mirrorless cameras.
SmallHD's Swipe OS enables you to apply monitoring tools such as waveform, vectorscope, and focusing aids, and swipe through preset pages with the ease of a touchscreen.
Secure the FOCUS SDI monitor to your camera's shoe or 1/4"-20 thread using the included FOCUS Tilt Arm. The Tilt Arm enables 180° of tilt for convenient monitoring at nearly any angle. A cold shoe on the Tilt Arm replaces the camera's accessory shoe.
|FOCUS SDI Monitor Kit|
|Display||5" / 12.7 cm IPS LCD|
|Resolution||1280 x 720|
|Pixel Density||294 ppi|
|Contrast Ratio||Not specified by manufacturer|
|Colour Gamut||70% NTSC|
|Temperature Adaptive Colour||No|
|Inputs||1 x BNC, 3G/HD/SD-SDI|
|Audio Out||1 x 3.5 mm stereo mini-jack|
|Other I/O||1 x Micro-USB|
|Input Signal||3G-SDI: YCC 4:2:2
HD-SDI: RGB/YCC 4:2:2 and 4:4:4
SD-SDI: YCC 4:2:2 at 10-bit
|Pixel Zoom||2x, 4x|
|Anamorphic De-Squeeze||1.33x, 1.5x, 1.66x, 2.0x|
|Audio Metering||Up to 8 channels|
|Power Input||1 x NP-F (Sony L) battery bay|
|Power Output||1 x Barrel: 3.5 mm outer, 1.1 mm inner|
|Power Consumption||5.04 W|
|Storage||1 x SD card slot|
|Mounting Threads||3 x 1/4"-20|
|Operating Temperature||0 to 70° C|
|Dimensions (HxWxD)||8.48 x 13.31 x 2.49 cm|
|Weight||187 g (without battery)|
|Thin BNC Cable (48")|
|Cable Length||4' / 1.2 m|
In The Box
- FOCUS 180 Degree Tilt Arm Mount for Select On-Camera Monitors
- UltraClear Screen Protector for Focus Monitor
- 4 x Cable Clip
- Thin BNC Cable (24")
- Micro-USB Male Cable for FOCUS On-Camera Monitor (12")
- Sony NPF L-Series Battery & Charger
- Sun Hood for FOCUS 5" On-Camera Monitor
- Thin BNC Cable (48")