Product Features
  • 4x 6G-SDI Inputs with Loop Outputs
  • 1x SDI & 1x HDMI MultiView Outputs
  • Supports SD, HD, UHD 4K, DCI 4K
  • Independent Inputs Allow Mixing Formats
  • Standard 2x2 Configuration
Our Price $789.00


Need more information about this product? - We'll get back to you ASAP
You must enter a valid email address.
ONLINE
Ships tomorrow
AUCKLAND
2-3 days
WELLINGTON
In Stock
North Island
$8.16
South Island
$8.16

The Blackmagic Design MultiView 4 features four 10-bit 6G-SDI inputs that let you monitor SD, HD, or 4K sources in any combination on Ultra HD monitors or TVs. This lets you take advantage of high resolution displays to view each source with increased clarity. The MultiView 4 allows for 2x2 display with each input fully re-synchronised. One 6G-SDI output and one HDMI multi-view output are provided, as well as a loop output for each 6G-SDI input for passing the signals to additional devices.

Housed in a 1 RU machined aluminium frame, the MultiView 4 is ready for use in the studio, broadcast truck, or even on location. It can be controlled with the included control software via the Ethernet port or by an optional Teranex front panel (not included). For easy integration into any facility, a built-in multi-voltage power supply supports 90 to 240 VAC, or you can power the unit by 48 VDC PoE+.

Note: IEC power cable is not included.

Key Features

  • Native Ultra HD multi-view output
  • 4x 6G-SDI inputs; accepts SD, HD, Ultra HD, and DCI 4K signals
  • Supports Ultra HD 4K (3840x2160) up to 30p; DCI 4K (4096x2160) at 24p
  • 1x 6G-SDI and 1x HDMI multi-view outputs
  • 4x SDI loop outputs
  • 2x2 multi-view configurations
  • 2-channel audio metres for each view
  • 16x9 SD support
  • Tally support with ATEM switchers via optional Teranex Mini Smart Panel
  • 1 RU machined aluminium chassis
  • Software control over Ethernet; supports Videohub router protocol
  • Built-in 90 to 240 VAC power supply
  • IEC power cable required
  • Supports PoE+ 48 VDC
Connections
SDI Video Input4 x 10-bit SD/HD/6G-SDI
SDI Video Output4 x 10-bit SD/HD/6G-SDI loop outputs
Multi-View Outputs1 x 10-bit HD/6G-SDI
1 x HDMI, type A (supports EDID of the monitor)
Multi-Rate SupportAuto detection of SD, HD, or 6G-SDI. Simultaneous viewing of 4K, HD, and SD video.
UpdatesUSB 2.0 high speed (480 Mb/s) interface or via Ethernet
Control1 x RJ45 Ethernet
ConfigurationVia RJ45 Ethernet or USB 2.0 for firmware updates and IP address setting
ReclockingOn all SDI outputs; auto switching between SD, HD, or 6G-SDI video
Standards
Format SupportSD Format Support
625/25 PAL
525/29.97 NTSC

HD Format Support
720p 50/59.94/60
1080i 50/59.94/60
1080PsF 23.98/24/25/29.97/30
1080p 23.98/24/25/29.97/30/50/59.94/60

2K Format Support
2048x1080p 23.98/24/25
2048x1080PsF 23.98/24/25

4K Format Support
3840x2160p 23.98/24/25/29.97/30
4096x2160p 24
SDI ComplianceSMPTE 259M, SMPTE 292M, SMPTE 296M, SMPTE 310M, SMPTE 425M-B, ITU-R BT.656, and ITU-R BT.601
SDI Video RatesSD-SDI: 270 Mb/s
HD-SDI: 1.5 Gb/s
3G-SDI: 3 Gb/s
6G-SDI: 6 Gb/s
SDI Video Sampling4:2:2 and 4:4:4
SDI Colour Precision4:2:2 and 4:4:4 10-bit
SDI Colour SpaceInputs: YUV or RGB
Outputs: YUV
SDI Audio Sampling48 kHz and 24-bit
SDI Metadata SupportVideo payload identification ancillary data as per SMPTE 352M
Software
Software ControlMulti-view control software included free for Windows and Mac OS X
Internal Software UpgradeVia included updater application
General
Power SupplyIEC power cable required
90 to 240 VAC input
PoE+: 48 VDC
Power Consumption16 W
Operating Temperature0 to 40°C
Storage Temperature-20 to 45°C
Relative Humidity0 to 90% non-condensing
Rack Space1 RU
Dimensions (W x H x D)13.99 x 4.45 x 16.99 cm
Weight0.58 kg
Product:
Blackmagic Design MultiView 4
Manufacturer:
Blackmagic Design
Model:
HDL-MULTIP6G/04
SKU:
HDL-MULTIP6G/04
RM Product #:
33213