Signal Processing & Distribution

• 12G-SDI Input and Output up to 4K/UltraHD.
• Four-Channel Balanced Audio Embedder/Disembedder.
• Dipswitch Configuration.
• USB Connectivity.

• Up to 4K HDMI & 12G-SDI Input.
• Converts HDMI to SDI & SDI to HDMI.
• Upscales/Downscales, Converts Frame Rate.
• 1 x HDMI Input, 1 x HDMI Output.
• 2 x SDI Loop Through & 2 x SDI Outputs.

• SFP+ Module with PIN Photodiode
• Optical SDI to Electrical Conversion
• Support for SDI Pathological Patterns
• Operating Data Rate up to 11.88 Gb/s
• Hot Pluggable SFP+ LC Connector
• Single-Mode Transmission up to 10km

• Auto-Sensing Input
• Six Separately Buffered Outputs
• Reclocking & Equalisation
• Universal Power Supply Included

• Converts Between SDI Standards
• Multi-Link to Single-Link and Vice Versa
• Supports up to DCI 4K Resolution
• Re-Clocks and Amplifies

• 1RU Panel for 16 Unified Connectors
• Flush-mount Female XLR-Solder Connectors
• Made of 16-gauge Cold-rolled Steel
• Matte Black Powder Coat Panel Finish
• Top & Bottom Panel Reinforcement Folds

• 1RU Panel for 16 Unified Connectors
• Flush-mount F-F Type Connectors
• Made of 16-gauge Cold-rolled Steel
• Matte Black Powder Coat Panel Finish
• Top & Bottom Panel Reinforcement Folds

• Ideal for 12G-SDI Video Installations
• Sturdy 1 RU 16-Gauge Steel Panel
• 16 BNC to BNC Standoff Receptacles
• Durable Powder Coat Finish
• Top and Bottom Reinforcement Folds

• 1RU Panel for 16 Unified Connectors
• ISO Standoff BNC/RCA/F/XLR Connectors
• Made of 16-gauge Cold-rolled Steel
• Matte Black Powder Coat Panel Finish
• Top & Bottom Panel Reinforcement Folds

• 1RU Panel for 16 Unified Connectors
• ISO Standoff F-F Type Connectors
• Made of 16-gauge Cold-rolled Steel
• Matte Black Powder Coat Panel Finish
• Top & Bottom Panel Reinforcement Folds

• AV Bulkhead Panel
• 8x XLRF & 8x XLRM to Solder Connectors
• Multiple Applications
• Steel Construction
• Black Matte Powder-Coat Finish

• 1RU Panel for 16 Unified Connectors
• Flush-mount Male XLR-Solder Connectors
• Made of 16-gauge Cold-rolled Steel
• Matte Black Powder Coat Panel Finish
• Top & Bottom Panel Reinforcement Folds

• 20 DVJB-S / 75 ohm Dual Video Jacks
• For HD-SDI / Serial Digital Video
• Bandwidth - DC to 3.0 GHz
• Return Loss - 20 dB
• Used for HDTV Upgrades & in OB Vans

• Converts Four 2110 IP Devices to 12G-SDI
• Simultaneously Powers Devices
• UHD 4K Resolution Support
• One 12G-SDI Programme Return Feed
• Redundant Power

• Convert 8 x 12G-SDI Devices to SFP Fibre
• UHD 4K Resolution Support
• Redundant Power
• 1 RU Rackmount Design

• 12G-SDI to 2110 IP Convertor
• Video Monitoring To/From Studio Camera
• Supports UHD 4K Video via SMPTE-2110 IP
• 5-Pin XLR Talkback Control
• Windows/macOS Software Utility
• PoE and 10G Ethernet Power

• 12G-SDI to SFP Fibre Convertor
• Video Monitoring To/From Studio Camera
• Supports UHD 4K Video via SFP Fibre
• Talkback Control
• Windows/macOS Software Utility
• PoE and 10G Ethernet Power

• 2110 IP to HDMI Convertor
• Video Monitoring To/From Studio Cameras
• Supports UHD 4K Video via SMPTE 2110 IP
• Windows/macOS Software Utility
• PoE and 10G Ethernet Power

• 24 DVJB-S / 75 ohm Dual Video Jacks
• For HD-SDI / Serial Digital Video
• Bandwidth - DC to 3.0 Ghz
• Return Loss - 20 dB
• Used for HDTV Upgrades & in OB Vans

• 24 DVJB-S / 75 ohm Dual Video Jacks
• For HD-SDI / Serial Digital Video
• Bandwidth - DC to 3.0 GHz
• Return Loss - 20 dB
• Used for HDTV Upgrades & in OB Vans

• 78 DVJB-W / 75 ohm Dual Video Jacks
• For HD-SDI / Serial Digital Video
• Bandwidth - DC to 3.0 GHz
• Return Loss - 20 dB
• Used for HDTV Upgrades & in OB Vans

• 1RU / 26 Loaded Video Jacks / DVJB-W
• 52 (2 x 26) Patch Points
• Improved Rotary Switch
• Beryllium-copper / Gold-plated Ports
• Light Weight Alloy Body

• 2RU / 26 Loaded Video Jacks / DVJB-W
• 52 (2 x 26) Patch Points
• Improved Rotary Switch
• Beryllium-copper / Gold-plated Ports
• Light Weight Alloy Body

• 26 DVJB-S / 75 ohm Dual Video Jacks
• For HD-SDI / Serial Digital Video
• Bandwidth - DC to 3.0 GHz
• Return Loss - 20 dB
• Used for HDTV Upgrades & in OB Vans

• 26 DVJB-S / 75 ohm Dual Video Jacks
• For HD-SDI / Serial Digital Video
• Bandwidth - DC to 3.0 GHz
• Return Loss - 20 dB
• Used for HDTV Upgrades & in OB Vans

• 2RU Panel for 32 Unified Connectors
• Flush-mount Male XLR-Solder Connectors
• Made of 16-gauge Cold-rolled Steel
• Matte Black Powder Coat Panel Finish
• Top & Bottom Panel Reinforcement Folds

• 32 Flush-Mount BNC Feedthrough Terminals
• 12G-SDI Rated
• 2 RU Rackmount Form-Factor
• 16-Gauge Steel Panel
• Durable Matte-Black Powder Coat Finish

• Ideal for 12G-SDI Video Installations
• Sturdy 2 RU 16-Gauge Steel Panel
• 32 BNC to BNC Standoff Receptacles
• Durable Powder Coat Finish
• Top and Bottom Reinforcement Folds

• 2RU Panel for 32 Unified Connectors
• ISO Standoff BNC/RCA/F/XLR Connectors
• Made of 16-gauge Cold-rolled Steel
• Matte Black Powder Coat Panel Finish
• Top & Bottom Panel Reinforcement Folds

• 2RU Panel for 32 Unified Connectors
• Flush-mount M&F XLR-solder Connectors
• Made of 16-gauge Cold-rolled Steel
• Matte Black Powder Coat Panel Finish
• Top & Bottom Panel Reinforcement Folds

• 32 MDVJ-STW / 75ohm Dual Video Jacks
• For HD-SDI / Serial Digital Video
• Bandwidth - DC to 3.0 GHz
• Return Loss > 10 dB
• Used for HDTV Upgrades & in OB Vans

• 32 MDVJ-STW / 75 ohm Dual Video Jacks
• For HD-SDI / Serial Digital Video
• Bandwidth - DC to 3.0 GHz
• Return Loss > 10 dB
• Used for HDTV Upgrades & in OB Vans

• 96 3G-Ready Mid-Size Video Jacks
• Normal Through Circuit Type

• 32 3G-Ready Mid-Size Video Jacks
• Straight Through Circuit Type

• 32 3G-Ready Mid-Size Video Jacks
• Straight Through Circuit Type

• 32 MDVJ-STS / 75ohm Dual Video Jacks
• For HD-SDI / Serial Digital Video
• Bandwidth - DC to 3.0Ghz
• Return Loss > 10 dB
• Used for HDTV Upgrades & in OB Vans

• 32 x MDVJ-STS Loaded
• Canare's Proprietary Rotary Switch
• Beryllium Copper, Gold-plated Contacts
• 4 RU
• Lightweight Alloy Body

• Triple Rate 3G, HD, and SD-SDI
• 8-Channel AES I/O
• Setup via DIP Switch or Windows/Mac
• Formats to 2048 x 1080p Resolution

• Embed XLR Audio in an SDI Signal
• Disembed SDI Audio to Analogue XLR Audio
• Works with AJA MiniConfig Software
• Re-Clocked SDI Output

Compliant with Fibre/SDI SMPTE 297M-2006 Single-Mode Fibre Duplex Transmission I2C Bus Interface Up to 20 kg Transmission Distance Non-MSA Pinout Compatible with SFP MSA and SFF-8472

• Compliant with Fiber/SDI SMPTE 297M-2006
• Single-Mode Fiber Duplex Transmission
• I2C Bus Interface
• Up to 20km Transmission Distance
• Non-MSA Pinout
• Compatible with SFP MSA and SFF-8472

• 11 Selectable SDI & HDMI Output Formats
• Up/Down Scaling & Frame Rate Conversion
• 16 Preset Layouts
• Audio Level Metre Overlay
• Control Easily via DIP Switches

• Quad SDI Input / Quad ST Fibre Output
• Up to Ultra HD 4K Resolution
• Equalised and Reclocked Inputs
• ASI Compatible
• Meets All Relevant SMPTE Specifications

• Convert 4K HDMI Video to NDI Stream
• 1 x HDMI Input, 1 x HDMI Loop-Through
• 1 x RJ45 + PoE NDI Output
• HDMI 1.4, 2.0, DVI-D 1.0 Supported
• Input up to DCI 4K60 4:4:4 Video

• Convert 4K SDI Video to NDI Stream.
• 1 x SDI Input, 1 x SDI Loop-Through.
• 1 x RJ45 + PoE NDI Output.
• 6G/3G/HD/SD-SDI Supported.
• Input up to DCI 4K30 10-Bit 4:2:2 Video.

• 165MHz HDMI receiver.
• Adaptive HDMI equalizer support for cables lengths up to 30M.
• Support for customized EDID.
• Support for extraction of AVI/Audio InfoFrames.

• Connects existing source equipment into NDI-enabled, IP-based media networks
• Supports inputs up to 4K at 60fps with 16 channels of embedded audio
• Automatic input format detection and DHCP network configuration
• SDI loop-through connection

• Connects baseband presentation or distribution equipment into IP-based media networks
• Decodes Full NDI and NDI|HX including earlier variants into HD HDMI
• Up-converts the decoded HD signals to 4K for viewing on Ultra HD displays

• Supports NewTek’s popular NDI technology
• Supports full-bandwidth NDI and high-efficiency NDI|HX mode
• Automatic output format optimisation and DHCP network configuration
• Decodes streams up to 4096x2160 at 60 frames per second
• Connects baseband presentation or distribution equipment

• Connects baseband presentation/distribution equipment into IP-based media networks
• Supports NDI technology including full-bandwidth NDI and high-efficiency NDI|HX mode
• Supports streaming protocols including SRT, RTSP, RTMP, UDP, RTP, HLS and HTTP

• Connects baseband presentation or distribution equipment into IP-based media networks
• Supports NDI technology including Full NDI and NDI|HX mode
• Supports streaming protocols including SRT, RTSP, RTMP, UDP, RTP, HLS and HTTP

• Seamless bridge between analog audio, software and IP standards
• Flexible, virtual audio matrix to allow routing or mixing of any analog
• Enables mixed-technology local and remote production workflows and ProAV installations
• Support for Dante Controller
• Plug-and-play as a UAC device
• Provide HTTP APIs

• Mesh Pouch with One Pocket.
• Metal Zipper.

• Mesh Pouch with Two Pockets.
• Metal Zipper.

• Aluminium Bracket with 1/4" Screw and Key.
• Cold Shoe Mount.
• Includes 4 x Screws and Key.

• 5 x Silicone Bands
• Together with the silicone bands of the TRACK E set, up to 10 devices can be marked in different colours

• Elaborately powder-coated stainless steel
• Fastens your TRACK E Timecode Audio Recorder securely to your talent.

• Find all the colours of the rainbow in this set of nine bands
• Two additional Tentacle clamps in new small logo zipper bag.

• Add Fibre Module to BMD Studio Camera 4K
• Run Optical Fibre up to 28 Miles Away
• Supports 12G-SDI, 10-Bit 4:2:2 Video
• ATEM Camera Convertor Not Required
• Control Camera with ATEM Switcher
• ATEM Studio/Talkback Convertor Required

• Standard SFP Cage
• LC Fibre Connections
• Supports SD and HD Resolutions

• Advanced DDS technology, 10MHz frequency output
• 125MS/s sample rate, and 1μHz frequency resolution
• Vertical Resolution : 14 bits, up to 1M arb waveform length
• Comprehensive waveform output : 5 basic waveforms, and 45 built-in arbitrary waveforms

• Triple Rate 3G, HD, and SD-SDI
• 8-Channel AES I/O
• Setup via DIP Switch or Windows/Mac
• Formats to 2048 x 1080p Resolution

• Compact analogue distribution amplifier
• Distribute tri-level sync
• Low cost

• PCIe Express Gen 2.0 8-lane
• Up to four independent* channels 3G, HD, SD-SDI I/O
• All SD/HD/2K x 1080/4K video formats
• 3G input/output for High Frame Rate (HFR) support.
• 8/10-bit YCbCr and 12-bit RGB frame buffer formats
• 2 independent Mixer/Keyer widgets

• PCIe Express Gen 2.0 8-lane
• Up to four independent* channels 3G, HD, SD-SDI I/O
• All SD/HD/2Kx1080/4K video formats
• 3G input/output for High Frame Rate (HFR) support.
• 8/10-bit YCbCr and 12- bit RGB frame buffer formats

• Convertor for Colour Management
• 1 x 12G-SDI Input, 2 x 12G-SDI Outputs
• 1 x HDMI 2.0 Output
• Supports UHD 4K and 16-Bit TIFF
• 3D LUT Processor
• Various Processing Pipeline Modes

• Quad LC Fibre Input / Quad SDI Output
• Up to Ultra HD 4K Resolution
• Equalised and Reclocked Inputs
• ASI Compatible
• Meets All Relevant SMPTE Specifications

• Quad SDI Input / Quad LC Fibre Output
• Up to Ultra HD 4K Resolution
• Equalised and Reclocked Inputs
• ASI Compatible
• Meets All Relevant SMPTE Specifications

• Converts HDMI 2.0 to 12G-SDI, up to 4K 60p
• Supports up to 60p input at 4:2:2/4:4:4/4:2:0
• Supports 2SI 4K/UltraHD SDI mapping
• Two 12G-SDI outputs
• Configure via USB port and supplied Mini-Config software

• Convert an HDMI 2.0 input with up to 8-Channels of audio
• Analyzes HDR Infoframe data
• Transmits two DA 12G-SDI signals on each SDI output
• Single channel Fiber 12G LC transmitter
• FiberLC-1T-12G SFP installed

• Converts HDMI to 3G-SDI over Fibre
• Supports up to 1080p60 Resolution
• Up to 6 mi Transmission Distance
• Supports Embedded HDMI Audio
• Analogue Audio Input

• Converts HDBaseT to 3G-SDI
• Extend uncompressed SDI signals over Cat 5 cable
• Configure via USB port
• IR in and out
• RS-232 device control connection

• Universal power supply
• Compact and portable
• HD-SDI/SDI to DVI-D
• HDMI 1.3a support
• High-quality scaling engine

• Convert 12G-SDI to HDMI 2.0b at up to 4K 60p
• HDR support for HDR10 and HLG
• Fiber LC outputs
• 12G-SDI loop out

• Convert 12G-SDI to HDMI 2.0b at up to 4K 60p
• HDR support for HDR10 and HLG
• Fiber LC single channel SFP transceiver
• 12G-SDI loop out

• HFR support
• Simplified monitoring connection
• Integrates 4K monitors
• < 8 channels of audio
• 4 x 3G-SDI inputs

• 64 inputs, 64 outputs
• Slim and compact profile
• Powerful signal control
• Broadcast standard reliability
• Simple installation and configuration

• Support for 12G/6G/3G-SDI audio embedding to- and from- the Dante audio ecosystem
• Dual, and independent 12G-SDI Input and Output ports, each supporting 16-audio channels, totaling 64-channels per card in a compact design
• 1x Primary and 1x Secondary Gigabit Ethernet ports for Dante network redundancy
• 64-channels of simultaneous SDI/Dante audio bridging per card

• Video Formats: 270 Mbps - 12 Gbps, format agnostic
• Inputs: 1x 12G-SDI BNC; 1x Single-Mode LC Fiber Connectors
• Outputs: 1x 12G-SDI BNC; 1x Single-Mode LC Fiber Connectors
• Monitor via openGear DashBoard
• Support for HDR - High Dynamic Range video

• Scan Converter
• openGear compatible card
• 3G-SDI input with loop through
• 3G-SDI and HDMI 1.4 outputs

• HDMI Input
• HDMI and SDI Outputs
• Supports SD, HD, and VESA Resolutions
• Region-of-Interest Selection
• 24-Bit Multi-Channel Audio Support

• Universal power supply
• Compact and portable
• Accepts 8-channel embedded audio
• Stereo RCA output

• 4x 6G/3G-SDI outputs
• HDMI simultaneous output
• USB port for software configuration
• Power over HDBaseT (PoH)

• Universal 100-240V, 50/60Hz power input
• Twelve separate +5V DC regulated outputs
• Mounting slots

• DVI to SDI Conversion
• DVI Loop Through for Monitoring
• HDMI Adapter Supported on Input & Loop
• Region of Interest Scaling
• Reference Input

• 4K and UltraHD Input Signals Supported
• Simultaneous SDI and HDMI Output
• Supports 4K/UHD at 50/60 fps
• 3G, HD, and SD Input Support
• Control via MiniConfig Software over USB

• 600MHz/18Gbps HDR, HDR10+
• HLG, DV & LLDV, eARC, ALLM, IMAX

• 3x1 Switcher and Scaler.
• HDMI and VGA Inputs.
• Supports SD, HD, and VESA Resolutions.
• 4:4:4 and 4:2:2 Chroma Subsampling.
• HDCP and CEC Control.

• Features two HDMI inputs plus a VGA input with audio.
• Allows advanced HDMI display devices to be used with legacy VGA sources.
• Extends AV up to 70 meters.

• 4K/UHD Capability @ 60 Hz with 4:4:4 Chroma Sampling
• HDCP 2.2 Compliant
• Automatic Input Selection Using Hot Plug Detect & Video Detection Technology
• Delivers Return Audio From a TV Via ARC to an Optical Digital Audio Output
• TCP/IP, RS-232, & IR Control

• Pair and synchronise timecode to compatible software applications and 3rd party products
• Extend the range of the Bluetooth connected device to the Ninja V ( with AtomX SYNC) from 15m to around 200m and add the ability to use the 'out of range' SYNC feature
• Rest of the world Frequency Version

• Sync Frame-Accurate Timecode via RF
• Provides BNC Genlock, LTC, Word Clock
• Standalone, Master, or Slave Modes
• Syncs with AtomX SYNC and Ninja V via RF

• Bi-directional cable

• Bi-directional cable

• A cable to take timecode out of the UltraSync ONE and feed it to any device that accepts timecode IN via 5-pin LEMO

• A cable to take timecode out of the UltraSync ONE and feed it to any device that outputs timecode from a 5-pin LEMO

• For Atomos UltraSync ONE Sync Device
• Provide Mic-Level Timecode via LTC Port
• DIN 1.0/2.3 BNC to Right-Angle 3.5mm
• Sync Timecode with 3.5mm Device

• Feedsboth timecode and genlock from the UltraSync ONE to all RED cameras that have a 4-pin LEMO sync port.

• Protective Silicone Case
• Designed to Fit UltraSync ONE
• Mounts with Hook-and-Loop & Magnet
• Black Colour with Front Logo

• Protective Silicone Case
• Designed to Fit UltraSync ONE
• Mounts with 1/4"-20 Mounting Threads
• Black Colour with Front Logo

• 80 Seconds of the Highest Quality License & Revenue-Protecting Delay

• 4 x 12G-SDI Inputs/Outputs
• Independently Configurable Ports
• SFP+ Port
• Full NDI Encoding and Decoding

• NDI 5 to HDMI 2.0 Convertor/Player
• Connects to NDI Network via Ethernet
• Auto-Displays NDI Streams as Thumbnails
• Supports Resolutions up to UHD 4K60
• Supports NDI, HDI|HX2, NDI Remote/Bridge
• Gigabit Ethernet, API Support

• 3G-SDI to NDI & NDI to 3G-SDI Conversion
• Supports 16-Ch 1080p or 4-Ch DCI 4K60
• 16 x 3G-SDI (BNC) Inputs/Outputs
• 2 x 10 GigE RJ45 Input/Output/Control
• NDI Input/Output & NDI HX Input
• Select 8-/16-Bit, 4:2:2 NDI Encoding

• Right-Angle 3.5mm Mini-TRS Jack.
• Straight RED Connector.
• 16" Length Cable.

• Right-Angle 3.5mm Mini-TRS Jack.
• Straight 5-Pin LEMO Connector.
• 16" Length Cable.

• Right-Angle 3.5mm Mini-TRS Jack.
• Straight 3-Pin XLR Connector.
• 16" Length Cable.

• Bidirectional TC Signal Cable.
• Right-Angle 3.5mm Mini-TRS Jack.
• BNC Connector.
• 16" Length Cable.

• Bidirectional TC Signal Cable.
• Right-Angle 3.5mm Mini-TRS Jack.
• Right-Angle BNC Connector.
• 16" Length Cable.

• Right-Angle 3.5mm Mini-TRS Jack.
• Right-Angle 1/4" Plug Connector.
• 16" Length Cable.

• Right-Angle 3.5mm Mini-TRS Jack.
• Right-Angle ALEXA Mini Connector.
• 12" Length Cable.

• Timecode from TC-1 to Arri Alexa Mini
• Right-Angle Locking 3.5mm TRS Connector
• Right-Angle 5-Pin LEMO Connector

• Timecode from TC-1 to Various Devices
• Right-Angle Locking 3.5mm TRS Connector
• Straight 5-Pin LEMO Connector

• Timecode from TC-1 to BNC Devices
• Right-Angle Locking 3.5mm TRS Connector
• Right-Angle BNC Connector

• Use Tentacle & An External Mic
• For Cameras with Mini-Jack Audio Input
• 30cm Length Cable

• 40 cm length (16 inch)
• Original right-angle Neutrik 3,5mm mini (3-pin)
• 3-pin connector for A10-TX transmitter from Audio Limited & Zaxcom ZFR 400

• Compatible with HD 1.3 and HDCP

• Extend and power your URSA Broadcast from up to 2 km away
• 1 Ultra HD camera feed
• 3 HD return feeds
• Live camera controls with multiple channels of talkback
• Standard television industry talkback headset connections

• Connect to remote cameras up to 2 km away
• Multiple channels of video, talkback, control and power
• All video and data are transmitted using standard IP
• 3 independent HD return feeds
• 12G-SDI for an HD or Ultra HD camera feed

• Fits 1 or 2 Studio Fibre Convertors
• 2 RU Space

• For Studio Camera 4K Pro
• Single 10G Ethernet Cable to Camera
• Powers Camera via PoE
• Breakout of Video, Audio & Talkback

• Programmable Camera Controller
• Open-Source Arduino Platform
• Control Camera Over SDI Programme Return
• Compatible with BMD Studio Cameras
• Adjust Gain, Detail, Shutter, Zoom

• 2 HDBaseT Outs with Mirrored HDMI Outs
• Supports DCI 4K and UHD 4K at 60 Hz
• Ideal for Classrooms and Small Offices
• 3 HDBaseT Inputs, 4 HDMI Inputs
• Multi-Function 15-Pin HD Analogue Input

• Extremely small design for portable operation.
• Supports upgrading software via USB connection.
• Includes camera control features for Blackmagic ATEM switchers.

• Extremely small design for portable operation.
• Supports upgrading software via USB connection.
• Includes support for HDR via SDI and HDMI.
• Supports 12G-SDI and HDMI timecode standards.
• Features 12G-SDI technology with built in SDI re-clocking.

• Extremely small design for portable operation.
• Supports upgrading software via USB connection.
• Includes support for HDR via SDI and HDMI.
• Supports 12G-SDI and HDMI timecode standards.
• Features 12G-SDI technology with built in SDI re-clocking.

• Extremely small design for portable operation.
• Supports upgrading software via USB connection.
• Includes 3D LUT for monitoring on SDI to HDMI model.
• Includes camera control features for Blackmagic ATEM switchers.

• 1 x HDMI Input, 2 x SD/HD/3G-SDI Outputs
• Selectable SD/HD Level A/B SDI Ports
• Supports up to 1080p60 Resolution I/O
• USB Power/SDI Re-Clocking/Timecode
• Automatic Input Signal Detection
• Compact, Rugged Design

• Extremely small design for portable operation.
• Supports upgrading software via USB connection.
• Includes support for HDR via SDI and HDMI.
• Supports 12G-SDI and HDMI timecode standards.
• Features 12G-SDI technology with built in SDI re-clocking.

• Extremely small design for portable operation.
• Supports upgrading software via USB connection.
• Includes support for HDR via SDI and HDMI.
• Supports 12G-SDI and HDMI timecode standards.
• Features 12G-SDI technology with built in SDI re-clocking.

• Extremely small design for portable operation.
• Supports upgrading software via USB connection.
• Includes 3D LUT for monitoring on SDI to HDMI model.
• Includes camera control features for Blackmagic ATEM switchers.

• Extremely small design for portable operation.
• Supports upgrading software via USB connection.
• Includes 3D LUT for monitoring on SDI to HDMI model.
• Includes support for HDR via SDI and HDMI.
• Supports 12G-SDI and HDMI timecode standards.

• Extremely small design for portable operation.
• Supports upgrading software via USB connection.
• Includes 3D LUT for monitoring on SDI to HDMI model.
• Includes support for HDR via SDI and HDMI.
• Supports 12G-SDI and HDMI timecode standards.

• Analogue to SDI Conversion
• Embedded Audio

• Single Link SD/HD/3G/6G-SDI Input
• Component, Composite, & S-Video Output
• SD, HD, UHD 4K & DCI 4K Input Signals
• Automatic Input Signal Detection
• Redundant SDI Input & Looped SDI Output

• 4K HDMI Input
• 2 x 6G-SDI Outputs
• Supports SD, HD, UHD 4K & DCI 4K Signals
• Automatic Input Signal Detection
• 24-Bit, 48 kHz Audio

• 2 x 4K SDI Input
• 1 x HDMI Type A and 1 x SDI Output
• Supports SD, HD, UHD 4K & DCI 4K Signals
• Automatic Input Signal Detection
• 24-Bit, 48 kHz Audio

• De-Embeds Audio from SDI Signal
• Single Link 6G-SDI Input
• Supports SD, HD, UHD 4K & DCI 4K Signals
• Automatic Input Signal Detection
• Redundant SDI Input

• Auto SD/HD Switching
• 3GB/s Technology
• With Power Supply

• Embed Audio into up to 1080p SDI Signals
• Four 1/4" Audio Input Jacks
• Supports 4 Channels of Analogue Audio
• Supports 8 Channels of AES/EBU Audio
• Redundant SDI Backup Input

• Embeds Audio into SDI Signal
• Single Link 6G-SDI Input
• Supports SD, HD, UHD 4K & DCI 4K Signals
• Automatic Input Signal Detection
• Redundant SDI Input

• SDI to Optical Fibre Conversion
• Bi-Directional Capability
• 12G-SDI Technology
• Auto detection of SD, HD or 12G-SDI

• (1) SDI Input, (8) SDI Outputs
• 3G/HD/SD-SDI Auto-Switching Input
• Re-Clocked Outputs
• Ancillary Data & Embedded Audio
• 1080p & 2K Distribution

• Mini Convertor Series
• Six Output
• Tri-Sync or Black Burst

• Compact 3G-SDI and HDMI converter
• Convert Between SD to HD Video Formats
• Up / Down / Cross Conversions
• SD/HD/3G-SDI Input

• Advanced High-Data Rate Signal Convertor
• Down-Convert 12G-SDI 4K Signal to Analogue
• Supports Up to 4K DCI 4096x2160p Signals
• 12G-SDI Input and Loopout
• XLR Connections Switchable to AES/EBU

• Advanced High-Data Rate Embedder
• Embed Audio into up to 4K SDI Signals
• Embed via XLR, AES/EBU, RCA, or S/PDIF
• 12G-SDI Input and Output
• Supports up to Full 4K DCI 4096x2160p

• Quad-Link 12G-SDI Input
• 2 Single-Link 12G-SDI Outputs
• Supports SD, HD, UHD 4K & DCI 4K Signals
• Automatic Input Signal Detection
• 24-bit, 48 kHz Audio

• Connect lastest 12G-SDI equipment
• Perfect for broadcast installations
• Can be rack mounted
• Multi rate 12G-SDI technology

• Latest multi rate 12G-SDI connections
• Distributing a single SDI signal to multiple devices
• Can be rack mounted
• Optional front panel
• Compact size

• Convert an HDMI Signal to 12G-SDI
• Convert HDMI to Optical Fibre (Optional)
• Up to DCI 4K/60p Support on Input/Output
• XLR Inputs Switchable to AES/EBU
• Ethernet Port for Remote Control or PoE

• Attach in Place of Standard Front Panel
• Colour LCD, Spin Dial, and Push Buttons
• Adjust Settings, Browse Menus
• Monitor Conversions and Audio Levels
• Verify Timecode and Video Standard

• Convert SDI Equipment to 2110 IP Video Systems
• Rack Mount for Installation into Broadcast Systems
• Compact Rack Mountable Design
• Connect to any 3G‑SDI Equipment
• 10G Ethernet for Multiple SMPTE 2110 IP Channels

• Compliant with HDMI 1.2/HDCP 1.1/DVI 1.0
• Supports a maximum resolution of 1080p
• Supports digital and analogue audio input
• COE, FC certified
• RoHS compliant

• Low profile design for use in workstations or servers
• 8-lane PCIe 3.0 design
• Active or passive heatsink

• Low profile design for use in workstations or servers
• 8-lane PCIe 3.0 design
• Active or passive heatsink

• Low profile design for use in workstations or servers
• 8-lane PCIe 3.0 design
• Active or passive heatsink

• Low profile design for use in workstations or servers
• 8-lane PCIe 3.0 design
• Active or passive heatsink

• Low profile design for use in workstations or servers
• 8-lane PCIe 3.0 design
• Active or passive heatsink

• Low profile design for use in workstations or servers
• 8-lane PCIe 3.0 design
• Active or passive heatsink

• Low profile design for use in workstations or servers
• 8-lane PCIe 3.0 design
• Active or passive heatsink